金川公司第二冶炼厂节能途径探讨

本文结合金川公司第二冶炼厂的具体实际,从技术节能和管理节能两个方面阐述了节能工作中应注意的问题,指出了节能的具体措施。     

89C51单片微机在自动定位系统中的应用

针对枕式包装机定位系统存在的问题，提出并研制了基于单片机机的控制系统，该系统使包装定位精确，实现袋长和袋速的予置和实时检测等功能，实际运行平稳可靠，效果良好。     

SiO2纳米复合稳定WO3薄膜气致变色特性研究

以钨粉为主要原料,采用过氧化法及提拉技术制备WO3薄膜,通过SiO2纳米颗粒复合改性提高了WO3薄膜的气致变色稳定性.测试并研究了SiO2复合掺杂对溶胶颗粒分布、气致变色稳定性等的影响,通过测试薄膜循环中红外振动吸收的演变,深入研究了SiO2纳米复合对WO3薄膜气致变色性能影响的内在机制.研究结果表明,SiO2的掺杂抑制了WO3薄膜内的共角聚合,将薄膜的致/褪色循环次数由20次提高到500次以上,WO3-SiO2复合薄膜的稳定网络结构是提高其气致变色循环稳定性的主要原因.     

Effect of postmolding heat treatment on in vitro properties of a polyanhydride implant containing gentamicin sulfate

A polyanhydride implant containing gentamicin sulfate was fabricated using a laboratory-scale injection-molding machine. After injection molding, the implants were subject to heat treatment at 60°C for various time periods with or without nitrogen protection. The impact of this heat treatment on the in vitro properties of the implants including copolymer molecular weights, mechanical properties, and in vitro drug-release profiles was investigated. This heat treatment caused a drastic drop in the molecular weight of the copolymer. Heating without nitrogen protection resulted in the hardening of the implant, but heating in the presence of nitrogen rendered the implant less rigid. It was also found that a faster in vitro drug release profile was shown by implants heated without nitrogen protection and a pronounced slowing down in drug release was exhibited by implants heated with nitrogen protection.     

Direct sampling of chemical weapons in water by photoionization mass spectrometry

The vulnerability of water supplies to toxic contamination calls for fast and effective means for screening water samples for multiple threats. We describe the use of photoionization (PI) mass spectrometry (MS) for high-speed, high-throughput screening and molecular identification of chemical weapons (CW) threats and other hazardous compounds. The screening technology can detect a wide range of compounds at subacute concentrations with no sample preparation and a sampling cycle time of approximately 45 s. The technology was tested with CW agents VX, GA, GB, GD, GF, HD, HN1, and HN3, in addition to riot agents and precursors. All are sensitively detected and give simple PI mass spectra dominated by the parent ion. The target application of the PI MS method is as a routine, real-time early warning system for CW agents and other hazardous compounds in air and in water. In this work, we also present comprehensive measurements for water analysis and report on the system detection limits, linearity, quantitation accuracy, and false positive (FP) and false negative rates for concentrations at subacute levels. The latter data are presented in the form of receiver operating characteristic curves of the form of detection probability P(D) versus FP probability P(FP). These measurements were made using the CW surrogate compounds, DMMP, DEMP, DEEP, and DIMP. Method detection limits (3sigma) obtained using a capillary injection method yielded 1, 6, 3, and 2 ng/mL, respectively. These results were obtained using 1-microL injections of water samples without any preparation, corresponding to mass detection limits of 1, 6, 3, and 2 pg, respectively. The linear range was about 3-4 decades and the dynamic range about 4-5 decades. The relative standard deviations were generally <10% at CW subacute concentrations levels.     

Creation of Nonspherical Microparticles through Osmosis‐Driven Arrested Coalescence of Microfluidic Emulsions

Droplet‐based microfluidics enable the production of emulsions and microparticles with spherical shapes, but the high‐throughput fabrication of nonspherical emulsions and microparticles still remains challenging because interfacial tension plays a dominant role during preparation. Herein, ionic liquids (ILs) containing salts, which possess sufficient osmotic pressure to realize water transport and phase separation, are introduced as inner cores of oil‐in‐oil‐in‐water double emulsions and it is shown that nonspherical emulsions can be constructed by osmosis‐driven arrested coalescence of inner cores. Subsequently, ultraviolet polymerization of the nonspherical emulsions leads to nonspherical microparticles. By tailoring the number, composition, and size of inner cores as well as coalescence time, a variety of nonspherical shapes such as dumbbell, rod, spindle, snowman, tumbler, three‐pointed star, triangle, and scalene triangle are created. Importantly, benefitting from excellent solvency of ILs, this system can serve as a general platform to produce nonspherical microparticles made from different materials. Moreover, by controlling the osmotic pressure, programmed coalescence of inner cores in double emulsions is realizable, which indicates the potential to build microreactors. Thus, a simple and high‐throughput strategy to create nonspherical microparticles with arrested coalescence shapes is developed for the first time and can be further used to construct novel materials and microreactors.     

Experimental and numerical study on aerodynamic noise of outdoor unit of room air conditioner with different grilles

The aerodynamic and aeroacoustic performances of outdoor unit with two different types of grille have been investigated in present study. Experimental results indicate that the grille sharp will affect the flow rate and increase broadband noise level of outdoor unit. Based on noise generation mechanism and CFD simulation, vortex shedding noise model and inlet turbulence noise model are adopted to predict the broadband noise level of outdoor unit. When vortex shedding noise is concerned, the wake parameters should be calculated at 3 mm downstream of grille to achieve good accuracy. Inlet turbulence noise is generated from the interaction between blade wake and the grille, and plays less important role in present outdoor unit configuration. In comparison with experimental results, it is shown that the broadband noise prediction method could provide reasonable accuracy and the error between prediction and experiment is less than 1 dBA.     

非对称电阻场板场效应器件击穿特性仿真分析

利用TCAD仿真研究一种二维紧耦合电阻场板电流调制原理下的物理模型与最优化结构。通过优化关键工艺与材料参数,改善器件漂移区尖峰电场,最终在相同漂移区掺杂下击穿电压较一维PN结理论击穿电压提升273%,相同归一化击穿电压10%变化范围下,漂移区电荷变化允许冗余范围比现有传统PN超结拓宽15倍。相较于对称电阻场板场效应器件,在现有工艺下非对称优化电阻场板场效应器件能够更好的实现结构小型化与高密度的设计。