The integral representations of solutions for circular plate problems without any hold

In this article, the following results are obtained: (1) a special solution and a general solution (non-series form) for circular plate problems are given; (2) integral representations of solutions for circular plate problems without any hold with built-in edge conditions and simply supported edge conditions are found.     

新型光电混合式电流互感器设计

设计了一种光电混合式电流互感器,它由传感头、光纤传输和光电转换器、信号处理电路和工作电源4部分组成。这种结构具有绝缘性能高、可靠性强、质量小等特点,并对误差情况进行了分析。     

撰写科技论文的要素

本文讨论了撰写科技论文时,包括论文的题目、前言、推导、实例、结论、提要和关键词等各种要素的作用和正确的撰写方法,列举一些写得比较好的范例和一些不很恰当的例子。同时也分析了在岩土工程科技论文写作中出现的一些如泛泛而谈、钻牛角尖、大而无当、背离工程实际、结论与前提不符等值得注意的倾向,指出了产生的原因并提出了解决的方法。     

Efficient fine granularity scalability using adaptive leaky factor

Fine Granularity Scalability (FGS) video coding has been adopted by the MPEG-4 standard for video streaming applications. In this paper, we propose a novel FGS coding scheme, which applied adaptive leaky factors for the enhancement layer prediction to further improve the coding efficiency of FGS. A flexible method that can dynamically determine the leaky factors according to the network conditions is also presented. With the proposed method, a better trade-off between the coding efficiency and drifting reduction can be achieved, and the coding performance is further improved compared with using a fixed leaky factor. Experimental results show that the proposed method can further improve the coding efficiency over a wide range of bitrate and packet loss ratio, and still keep the original characteristics, such as fine granularity, and bandwidth adaptation.     

“新合纤”的研究开发

介绍了“新合纤”研究开发的历史过程以及“新合纤”的特征及其加工方法，讨论了“新合纤”研究开发的现状及其未来。     

岩性圈闭储层描述技术及应用

本文以高分辨率地震资料为基础，应用测井、钻井等资料，从沉积微相分析入手，建立了以河道砂体、河口坝砂体为主的地质及地震响应模型，并根据地震反射波组特征、地震反演的阻抗值及其他地震属性参数，确定了研究区的砂体变化及其分布规律，总结出一套针对薄互层特点的岩性圈闭识别技术。本文方法在大庆长垣以西古龙和他拉哈西地区的实际应用中取得了明显的效果。     

降低汽油烯烃含量裂化催化剂LBO-12的研制与开发

探讨了催化裂化过程降低汽油烯烃的反应原理，研究了催化剂各组分对裂化汽油性质影响的规律性，围绕提高氢转移活性，提出制备降烯烃裂化催化剂的技术路线，并研制开发了新型LBO-12降烯烃催化剂，固定流化床反应器对中试样品的评价和工业应用结果表明，该催化剂在不损失汽油辛烷值的前提下，降低催化裂化汽油烯烃能力较强，并具有较高的水热活性稳定性和良好的抗重金属污染特性。     

AOI技术在激光微孔产品检查中的应用

在过去几年里,小型PCB诸如硅芯片级以及便携式移动电话的生产者和设计者们已经发现:如果要保持自己的竞争力并具备生产高密度封装板能力,就必须采用微孔技术。微孔技术的出现要求针对微孔缺陷的有效检测手段对工艺进行过程控制。本文对激光微孔的自动光学检测进行了详细介绍。     

Effects of Process Conditions on Desalting and Demetalization of Crude Oil

The efficiency of desalting for six crude oils was studied with a SY-1 dynamic simulation experimental installation. The demulsifier DC2 was examined for 1#, 2#, and 4# crude oil and DC4 was used for 3#, 5#, and 6# crude oil. The effects of temperature, electric field gradient, dosage of demulsifier, and washing water on the desalting efficiency of six crude oils were investigated. The results showed that at the optimization process condition after desalting, the desalting efficiency and the salt content of 1# crude oil reached 89.17% and 1.92 mg/L; that of 2# crude oil reached 85.08% and 1.04 mg/L; that of 3# crude oil reached 91.06% and 1.35 mg/L; that of 4# crude oil reached 81.67% and 1.51 mg/L; that of 5# crude oil reached 81.03% and 2.32 mg/L; and that of 6# crude oil reached 86.64% and 2.67 mg/L. Different crude oils have different metal contents. Three assistants, ammonium nitrate (TJ1), nitric acid (TJ3), and polyamine carboxylate (TJ4), were used to improve the efficiencies of desalting and demetalization of six crude oils. TJ4 was more efficient in removing calcium and iron for 1# and 2# crude oil. TJ1 was more efficient in desalting and demetalizing 5# crude oil. The efficiencies for removal of calcium, iron, nickel, and vanadium respectively reached 99.89%, 98.33%, 20.58%, and 43.02%. TJ3 has better efficiency desalting and demetalizing for 6# crude oil. With the concentration of TJ3 increasing from 0 to 80 mg/L, the desalting efficiency increases from 31.22% to 73.54%, and the iron removal efficiency increases from 56.0% to 74.05%.     

Preparation and adsorption behavior of a cellulose‐based,mixed‐mode adsorbent with a benzylamine ligand for expanded bed applications

A novel mixed‐mode expanded bed adsorbent with anion‐exchange properties was explored with benzylamine as the functional ligand. The cellulose composite matrix, densified with stainless steel powder, was prepared with the method of water‐in‐oil suspension thermal regeneration. High activation levels of the cellulose matrix were obtained with allyl bromide because of the relative inertness of the allyl group under the conditions of the activation reaction. After the formation of the bromohydrin with N‐bromosuccinimide and coupling with benzylamine, the activated matrix was derived to function as a mixed‐mode adsorbent containing both hydrophobic and ionic groups. The protein adsorption capacity was investigated with bovine serum albumin as a model protein. The results indicated that the prepared adsorbent could bind bovine serum albumin with a high adsorption capacity, and it showed salt tolerance. Effective desorption was achieved by a pH adjustment across the isoelectric point of the protein. The interactions between the cell and adsorbent were studied, and the bioadhesion was shielded by the adjustment of the salt concentration above 0.1M. Stable fluidization in the expanded bed was obtained even in a 2% (dry weight) yeast suspension. The direct capture of target proteins from a biomass‐containing feedstock without extra dilution steps could be expected with the mixed‐mode adsorbent prepared in this work, and this would be especially appropriate for expanded bed adsorption applications. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008