铬盐清洁生产工艺中铝的脱除

分析了K2Cr2O7清洁生产工艺中Al(Ⅲ）-K2CrO4-K2Cr2O7-H2O体系的离子平衡，推导出25℃时混合溶液中[Al(Ⅲ）]和[H^ ],[Cr2O7^2-]/[CrO4^2-]之间的对应关系。并由实验测定验证了这一关系。提出了通过调整K2CrO4碳酸化反应转化率来降低体系中Al(Ⅲ）杂质含量的新方法。工业试验已证明了其可行性。     

悬浮床加氢裂化油溶性催化剂与沥青质的作用

在高压釜反应器中对添加了油溶性 Ni 催化剂(UPC-O)和水溶性 Ni 催化剂(UPC-W)的辽河稠油常压渣油(LHAR)进行了悬浮床加氢裂化实验。通过元素分析和傅里叶变换红外光谱(FTIR)分析对抑制反应生焦效果好的 UPC-O 与 LHAR 沥青质的作用进行了研究。元素分析结果显示,在 LHAR 中加入 UPC-O1000μg/g,沥青质和脱沥青质油中 Ni 含量分别出476μg/g和110μg/g 增加到7 559μg/g 和1 024μg/g,表明 UPC-O 在沥青质中有富集的趋势。FTIR 表征结果显示,UPC-O 和沥青质发生了相互作用。UPC-O 可在沥青质原位硫化为活性组分,对沥青质在悬浮床加氢裂化反应中的缩合起到好的抑制作用。     

垂直井两相流动生产测井解释滑动模型

在两相流动模拟实验数据分析的基础上 ,提出油水两相和气液两相流动的滑脱速度的实验关系 ,进而确定垂直井两相流动生产测井解释的滑动模型。现场实际测井资料处理结果表明该模型有很好的应用效果     

降低汽油烯烃含量裂化催化剂LBO-12的研制与开发

探讨了催化裂化过程降低汽油烯烃的反应原理，研究了催化剂各组分对裂化汽油性质影响的规律性，围绕提高氢转移活性，提出制备降烯烃裂化催化剂的技术路线，并研制开发了新型LBO-12降烯烃催化剂，固定流化床反应器对中试样品的评价和工业应用结果表明，该催化剂在不损失汽油辛烷值的前提下，降低催化裂化汽油烯烃能力较强，并具有较高的水热活性稳定性和良好的抗重金属污染特性。     

油基钻井液的推广及循环利用

针对普通水基钻井液在钻进中强、强水敏性油藏时会造成储层污染、产量降低的问题,指出了油基钻井液在钻进该类油藏时的优势和其成本高、对生态环境有污染的缺点。为了大面积推广应用油基钻井液,重点介绍了油基钻井液的特性和稳定性影响因素,并通过室内评价证明了油基钻井液在油层保护中的良好效果,着重阐述了油基钻井液在王庄油田的现场应用情况,并探讨了油基钻井液的循环利用技术。研究结果表明,油基钻井液不仅具有良好的油层保护效果,而且具有较好的社会经济效益。     

Effect of the absence of lipoxygenase isoenzymes on the storage characteristics of rice grains

Three varieties of paddy rice with and three varieties without lipoxygenase (LOX) isoenzymes were stored at room temperature, in dark conditions for 42 months. Insect damage and viability were investigated during that time. Varieties without LOX-1,2 and their offspring were screened with a rapid method of estimating LOX isoenzymes, and subjected to an accelerated-ageing experiment. The results indicated that in varieties without LOX-1,2, after long storage, rice quality was normal, but for varieties with LOX-1,2, rice quality deteriorated. With increase of storage time, the germination rate of the seed of most varieties decreased greatly except for varieties without LOX-1,2 where there was almost no change in the germination rate. In varieties without LOX-1,2 and their offspring, after an accelerated ageing experiment the germination rate of some varieties changed slowly, but with others, the germination rate changed quickly. This indicated that a definitive factor, which influenced the life of seeds, may be the loss of LOX-1,2. During storage, there was also a significant difference in the degree of insect damage. In varieties without LOX-3 insect damage was lower, but in varieties with LOX-3 insect damage was higher. Therefore, the absence of LOX-3 may be very important in insect resistance in rice grain.     

WF40防腐蚀涂料在原料水罐上的应用

中国石化股份有限公司洛阳分公司炼油厂污水汽提装置的原料水罐(V303)由于接触的污水中含有H2S,NH3,CO2,CN-,酚等多种腐蚀介质因此经常发生腐蚀泄漏事故。经涂刷WF40玻璃鳞片防腐蚀涂料后,已平稳运行两年。2002年检修检查,涂层完好,仍在继续使用。WF40涂料为环氧型玻璃鳞片涂料,其热膨胀系数与钢质基体接近,因此具有耐热冲击性强等优点。待涂罐体经喷砂除锈到Sa2.5级后,涂底漆2道,中间涂层2道、面漆2道,使干膜厚度达到350μm,可有效防止腐蚀性介质的渗透。     

风水联动放炮自动喷雾装置设计

矿尘始终是困扰井下安全生产的重要因素之一，危害很大。长期从事采掘和粉尘作业环境的职工易引起尘肺病，另外，在粉尘作业场所工作的职工的视线易受阻挡，操作中易造成人身事故。     

砌筑砂浆达不到设计要求的事故原因分析

从砂浆的配合比、和易性、原材料等对砌筑砂浆达不到设计要求的事故原因进行了分析。     

One‐step production of 2,3‐butanediol from starch by secretory over‐expression of amylase in Klebsiella pneumoniae

BACKGROUND: 2,3‐Butanediol (2,3‐BD) is a valuable chemical that can be biosynthesized from many kinds of substrates. For commercial biological production of 2,3‐BD, it is desirable to use cheap substrate without pretreatment, such as starch. However, there have been few reports on the production of 2,3‐BD directly from starch. RESULTS: In this work, gene malS coding for α‐amylase (EC 3.2.1.1) precursor was inserted into plasmid pUC18K, and secretory over‐expression of α‐amylase was achieved by engineered Klebsiella pneumoniae. The extracellular recombinant amylase accelerated the hydrolyzation of starch, and one‐step production of 2,3‐BD from starch was carried out by engineered K. pneumoniae. A 2,3‐BD concentration of 3.8 g L^?1 and yield of 0.19 g 2,3‐BD g^?1 starch were obtained after 24 h fermentation. CONCLUSION: The one‐step production of 2,3‐BD from starch was achieved by secretory over‐expression of amylase in K. pneumoniae. This would simplify the process and reduce the production cost considerably by enabling use of starch with minimal pretreatment. Copyright © 2008 Society of Chemical Industry