Restoration of stormwater retention capacity at the allotment-scale through a novel economic instrument

Urbanisation results in changes to runoff behaviour which, if not addressed, inevitably degrade receiving waters. To date, most stormwater management has focussed on the streetscape and public open space. Given that much of the catchment imperviousness is located on private land, we developed and tested a novel economic instrument (a uniform price auction) for encouraging allotment-scale stormwater retention. We evaluated bids using an integrated environmental benefit index (EBI), based on the ability of the proposed works to reduce runoff frequency, pollutant loads and to reduce potable water demand. The uniform price auction resulted in 1.4 ha of impervious areas being effectively 'disconnected' from the stormwater system. The EBI provided an objective and transparent method of comparing bids, which varied in the type of works proposed (e.g. rainwater tank, rain-garden), the cost and the resulting environmental benefit. Whilst the pilot auction was a success, the public subsidy of works undertaken was around 85%, meaning that property owners a relatively small private benefit in the works. Future auction rounds will be revised to (i) test an EBI which is more focussed on the protection of streams (assessing changes to runoff frequency, baseflow volumes and water quality) and (ii) provide an auction process which is simpler to understand, and provides greater practical support for landholders who wish to undertake works.     

An evaluation of the policy and techno-economic factors affecting the potential for biogas upgrading for transport fuel use in the UK

Gaseous biofuels including biomethane, which has been shown to be more environmentally beneficial than liquid biofuels, should contribute to meeting the challenging UK targets set for the supplying of biofuels to the road transport fuel market. Under the Renewable Transport Fuel Obligations the financial incentives for the supply of biofuels have been volatile, e.g. 2008/2009 saw Renewable Transport Fuel Certificate values fall to zero. Any shortfall from the maximum value has significant implications for all biofuels. It is demonstrated that biomethane can be produced at a cost which is competitive with liquid biofuels and fossil fuels within the UK. Technologies such as water scrubbing, pressure swing adsorption and physical and chemical absorption are available to upgrade biogas generated by anaerobic digestion of organic wastes to transport fuel quality, and technologies such as membrane separation and cryogenic distillation are being modified for such an application. The manufacture and sale of biomethane as a transport fuel is also financially competitive with Combined Heat and Power. One limiting factor may be the additional cost of purchasing and maintaining biomethane fuelled vehicles. Support in this area could lead to the rapid expansion of biomethane transport fuel infrastructure and bring significant long term environmental and economic advantages.     

The antimicrobial effect of wine on Listeria innocua in a model stomach system

A model stomach, containing a food matrix and a synthetic gastric fluid, was used to study the bactericidal effect of ingested wine on Listeria innocua. Volumes of wine equivalent to the ingestion of one glass and half a bottle, led, over a period of less than 2 h, to a reduction of 3 and 4 logarithmic cycles of the initial population respectively. The influence of ethanol and organic acids, wine constituents with known antimicrobial properties, was investigated. Ethanol exhibited a higher bactericidal effect than the mixture of the main wine organic acids. When testing the organic acids separately, malic and lactic acids were found to have the strongest effect. The combination of ethanol with the organic acids acted synergistically but to a lesser extent than wine itself. The results suggest that the ingestion of wine during a meal may diminish the quantity of Listeria persisting further in the alimentary tract.     

Contemporary genetic structure of walleye (Sander vitreus) reflects a historical inter-basin river diversion

River diversions can have unexpected biological consequences. In the mid-20th century, the upper Ogoki River in northern Ontario was diverted from its original Hudson Bay drainage to flow into the Great Lakes. Although walleye were present in both systems prior to the diversion, the Hudson Bay and Great Lakes watersheds had previously been separated since the early Holocene (7500–8500 years ago). We assessed the effects that this inter-basin diversion has had on the genetic structure of two formerly allopatric populations. We assessed the genetic structure and diversity of walleye in the Ogoki and Little Jackfish river systems and Lake Nipigon (number, distribution, and divergence of identified genetic groups) and quantified the contribution of fish from the historical population (Hudson Bay drainage Ogoki River) and Lake Nipigon to walleye in the Ogoki and Little Jackfish Rivers. Walleye from Ogoki Lake, the Ogoki River diversion through the Little Jackfish River, Lake Nipigon and Nipigon Bay were genotyped at 10 microsatellite loci. Significant genetic differences were detected among sampling locations: walleye from Ogoki Lake, presumably representing fish originally from the historical Ogoki River gene pool, were genetically similar to but statistically distinct from walleye within the diversion. Walleye from sample sites within the diversion and Ombabika Bay appear to form a single genetic group that is largely derived from the Ogoki watershed and differs significantly from walleye in Lake Nipigon and Nipigon Bay. Our findings confirm that the historical river diversion has had long-term effects on the genetic composition of contemporary walleye populations.     

Determination of polychlorinated dibenzo-p-dioxins,dibenzofurans, and biphenyls by gas chromatography/mass spectrometry in the negative chemical ionization mode with different reagent gases

Reagent gases that are used in mass spectrometry in the NCI mode for the determination of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), and biphenyls (PCBs) are discussed. Ion-molecule reactions and respective characteristic ions that form while using reagent gases (CH(4), O(2), i-C(4)H(10), NH(3), H(2), He, Ar, Xe, SF(6)) or gas mixtures (CH(4)/O(2), Ar/CH(4), CH(4)/H(2)O, Ar/O(2), i-C(4)H(10)/CH(2)Cl(2)/O(2)) are reviewed. It is shown that only CH(4), O(2), CH(4)/O(2), and CH(4)/N(2)O are widely used and well studied, even though-in the case of these reagent gases-there are contradictions between the publications of various authors. Such reagent gases as NH(3) and He are not well studied, but further investigations of their use for the determination of organochlorine pollutants could be of interest. The possibilities of more sensitive and selective determination of PCDDs, PCDFs, and PCBs are discussed.     

Development and Analytical Verification of an Integrated 2-D Surface Water—Groundwater Model

DIVAST is a two-dimensional hydrodynamic and water quality numerical model developed for estuarine and coastal modelling. The original model enables the simulation of problems such as pollution and flooding in surface waters. In this paper the existing model is extended to allow the modelling of 2-D groundwater as well as surface water in the same model, using an integrated approach rather than two disparate models. The changes to the original model are summarised and the method of implementation is outlined. The new extended model (DIVAST-SG) is then tested against an analytical solution to verify that the model solves the equations correctly. The model is shown to predict the analytical solution for two different scenarios to within approximately 1 % of the height of flood wave.     

Thermal stabilities of nanoporous metallic electrodes at elevated temperatures

Currently Pt-based metals are the best catalytic electrodes for fuel cells at operating temperatures below 500 °C. Pure platinum electrodes suffer degradation of microstructure over time at elevated temperatures due to Ostwald ripening. In this paper, better thermal stability of Pt–Ni nanoporous thin films relative to pure Pt is reported. Based on ab initio calculations, it was found that both the surface energy of a Pt_0.7Ni_0.3 cluster and the energy change of the Pt–Ni alloy cluster upon ripening on yttria stabilized zirconia (YSZ) solid electrolyte were lower than pure Pt. This suggested a better thermal stability of Pt_0.7Ni_0.3 than Pt. In addition, annealing impacts on microstructures and properties of nanoporous Pt and Pt–Ni alloy thin films were examined experimentally. SEM images show dramatic porosity reduction for pure Pt after annealing at temperatures of 400–600 °C but insignificant microstructure change for Pt–Ni nanoporous thin films. As a result, in solid oxide fuel cells using nanoporous Pt–Ni cathodic catalysts instead of pure Pt, better stability, lower electrode impedances, and higher power densities were achieved at elevated operating temperatures (350–500 °C).     

The value of monophasic capacitance of few-electron systems

Due to the discreteness of electronic charges in a nanoscale system, capacitance is defined in terms of the total interaction energy of N-electrons confined in a dielectric sphere. Specifically, the distribution of N-electrons is obtained from minimization of the total Coulomb and polarization interaction energy and the formation energy, the work done on the system. Our discrete charge dielectric (DCD) model gives rise to an electrostatic capacitance agreeing with the N=1 and ∞ cases. For nanometer-size devices, the Schrödinger equation should be used; however, for size greater than 10 nm, the Poisson equation accounts for spatial symmetry properties resulting from the discrete nature of interacting electrons. Without metallic components, the equal potential landscape does not coincide with our spherical boundary except for the N=1 case. There is a special configuration associated with each N. Hence, the capacitance defined is monophasic, representing a single electrostatic phase. The most important application of this work may lie in optoelectronics and biological systems.     

Networking lessons in delivering ‘Software as a Service’—part I

This is a two‐part paper. In part I, we describe the origins of Software as a Service (SaaS) and its value proposition to Corporate IT, Service Providers, Independent Software Vendors, and End Users. In part II, we examine the networking lessons learned in researching, building, and running a SaaS service. Copyright © 2002 John Wiley & Sons, Ltd.     

Self‐Compensation in Transparent Conducting F‐Doped SnO2

The factors limiting the conductivity of fluorine‐doped tin dioxide (FTO) produced via atmospheric pressure chemical vapor deposition are investigated. Modeling of the transport properties indicates that the measured Hall effect mobilities are far below the theoretical ionized impurity scattering limit. Significant compensation of donors by acceptors is present with a compensation ratio of 0.5, indicating that for every two donors there is approximately one acceptor. Hybrid density functional theory calculations of defect and impurity formation energies indicate the most probable acceptor‐type defects. The fluorine interstitial defect has the lowest formation energy in the degenerate regime of FTO. Fluorine interstitials act as singly charged acceptors at the high Fermi levels corresponding to degenerately n‐type films. X‐ray photoemission spectroscopy of the fluorine impurities is consistent with the presence of substitutional F_O donors and interstitial F_i in a roughly 2:1 ratio in agreement with the compensation ratio indicated by the transport modeling. Quantitative analysis through Hall effect, X‐ray photoemission spectroscopy, and calibrated secondary ion mass spectrometry further supports the presence of compensating fluorine‐related defects.