Porous Titanium Coatings Through Electrophoretic Deposition of TiH2 Suspensions

In the biomedical field, modification of titanium surfaces to improve the osteoinductive and antibacterial behavior is widely investigated. This functionalization can be further ameliorated by providing a porous coating with high loading capacity for bioactive materials and drug delivery carriers at the implant surface. In this work, a new powder metallurgical processing route used to deposit such porous pure titanium coatings on Ti based substrates is presented. The coatings were prepared by electrophoretic deposition (EPD) of TiH₂ powder suspensions followed by dehydrogenation and sintering in vacuum. The use of hydrides allowed to lower the sintering temperature below that of the α–β transition of the Ti6Al4V substrate. Measurement of the tensile bond strength confirmed a strong adhesion of the porous coating. Deposition of powders with different grain sizes resulted in porous titanium coatings with varying thickness, pore morphology, and surface roughness. The possibility to extend this coating technique to complex shaped implants is highlighted.     

A Printable Photopolymerizable Thermosensitive p(HPMAm‐lactate)‐PEG Hydrogel for Tissue Engineering

Bioprinting is a new technology in regenerative medicine that allows the engineering of tissues by specific placement of cells in biomaterials. Importantly, the porosity and the relatively small dimensions of the fibers allow rapid diffusion of nutrients and metabolites. This technology requires the availability of hydrogels that ensure viability of encapsulated cells and have adequate mechanical properties for the preparation of structurally stable and well‐defined three‐dimensional constructs. The aim of this study is to evaluate the suitability of a biodegradable, photopolymerizable and thermosensitive A–B–A triblock copolymer hydrogel as a synthetic extracellular matrix for engineering tissues by means of three dimensional fiber deposition. The polymer is composed of poly(N‐(2‐hydroxypropyl)methacrylamide lactate) A‐blocks, partly derivatized with methacrylate groups, and hydrophilic poly(ethylene glycol) B‐blocks of a molecular weight of 10 kDa. Gels are obtained by thermal gelation and stabilized with additional chemical cross‐links by photopolymerization of the methacrylate groups coupled to the polymer. A power law dependence of the storage plateau modulus of the studied hydrogels on polymer concentration is observed for both thermally and chemically cross‐linked hydrogels. The hydrogels demonstrated mechanical characteristics similar to natural semi‐flexible polymers, including collagen. Moreover, the hydrogel shows suitable mechanical properties for bioprinting, allowing subsequent layer‐by‐layer deposition of gel fibers to form stable constructs up to at least 0.6 cm (height) with different patterns and strand spacing. The resulting constructs have reproducible vertical porosity and the ability to maintain separate localization of encapsulated fluorescent microspheres. Moreover, the constructs show an elastic modulus of 119 kPa (25 wt% polymer content) and a degradation time of approximately 190 days. Furthermore, high viability is observed for encapsulated chondrocytes after 1 and 3 days of culture. In summary, we conclude that the evaluated hydrogel is an interesting candidate for bioprinting applications.     

The influence of demographic,physical, behavioral,and dietary factors on hemoglobin adduct levels of acrylamide and glycidamide in the general U.S. population

Purpose: This study aims to better understand the individual characteristics and dietary factors that affect the relationship between estimated consumption of acrylamide and measured acrylamide hemoglobin adduct levels (HbAA) and glycidamide hemoglobin adduct levels (HbGA). Methods: Acrylamide levels in individual food items, estimated by the U.S. Food and Drug Administration, were linked to data collected in the 2003–2004 National Health and Nutrition Examination Survey. Multivariable linear regression was used to evaluate the relationship between estimated consumption of acrylamide and HbAA. Results: A significant association between acrylamide intake and HbAA was observed, after adjustment for gender, race/ethnicity, smoking status, age, and BMI (R² = 0.34). Across quartiles of acrylamide consumption, HbAA and HbGA levels increased monotonically. Among nonsmokers, an evaluation of three heavily consumed, high AA concentration foods showed a positive trend between the consumed amount of fried potatoes and HbAA in children, adolescents, and adults. A significant positive trend between the consumed amount of potato chips or coffee was indicated in adolescents, adults, and seniors. Conclusions: Consumption of some individual foods affects HbAA concentrations more strongly and in an age-dependent manner. Our results suggest that effective dietary guidelines for controlling acrylamide intake should be subpopulation specific.     

Characterization of equine cDNA sequences for alphaS1-, beta- and kappa-casein

Here we report the entire cDNA sequences for equine alphaS1-, beta- and kappa-casein. Based on interspecies comparison, nine exons were found in equine beta-casein and five in kappa-casein. In equine alphaS1-casein cDNA the exon 5 was missing, which resulted in the total of 18 exons instead of 19 theoretically possible exons in alphaS1-casein cDNA. Comparison of DNA sequences representing exon 5 in other species with corresponding equine genomic region confirmed the presence of cryptic exon in horse genomic DNA. Equine alphaS1-casein mRNA was present in three forms in the lactating mammary gland and we showed that the two shorter forms were produced by skipping either the exon 8 or exon 15. In horse, as in some other mammals, beta- and kappa-casein are considerably more conserved (sequence identity 53% to 59% and 57% to 67%, respectively) than alphaS1-casein which appears as the most variable casein among species (sequence identity 40% to 54%). Interestingly, horse caseins resemble human much more than bovine caseins which may also explain the high dietetic value of mares' milk.     

The antilisterial effect of Leuconostoc carnosum 4010 and leucocins 4010 in the presence of sodium chloride and sodium nitrite examined in a structured gelatin system

To further enhance biopreservation of meat products, the antilisterial effect of the newly described protective culture Leuconostoc carnosum 4010 and its bacteriocins, leucocins 4010, was examined in the presence of sodium chloride and sodium nitrite in a solid matrix using a structured gelatin system. Interaction between Listeria monocytogenes 4140 and Leuc. carnosum 4010 or the leucocins 4010-resistant mutant L. monocytogenes 4140P showed that the inhibitory effect of Leuc. carnosum 4010 in the gelatin system was caused by the production and activity of leucocins 4010. The presence of sodium chloride (2.5% w/v) and sodium nitrite (60 mg/l) reduced the antilisterial effect of Leuc. carnosum 4010 in the structured gel system compared to the use of Leuc. carnosum 4010 alone. Investigations carried out at 10 degrees C showed that the lag phase of L. monocytogenes 4140 in the presence of Leuc. carnosum 4010 was reduced from 71 to 58 h by the addition of sodium chloride and to 40 h by the addition of sodium nitrite. Addition of sodium chloride increased the maximum specific growth rate of L. monocytogenes 4140 in the presence of Leuc. carnosum 4010 from 0.02 to 0.06 h(-1), whereas no change was observed by the addition of sodium nitrite. Compared to the antilisterial effect of leucocins 4010 alone, the addition of sodium chloride (2.5%, w/v) decreased the antilisterial effect at high concentrations of leucocins 4010 (5.3 and 10.6 AU/ml) as measured after 11 days of incubation at 10 degrees C. In gels with added leucocins 4010, the most pronounced reduction in growth of L. monocytogenes 4140 was observed at the highest concentration of leucocins 4010 (10.6 AU/ml) together with sodium nitrite (60 mg/l). More detailed information on the lag phase and the maximum specific growth rate of single colonies of L. monocytogenes 4140 in the presence of leucocins 4010 was obtained using microscopy and image analysis. No pronounced difference in the growth of single colonies was observed in the gel system. Real-time measurements of colony growth at 10 degrees C in the gelatin matrix showed that the growth inhibiting effect of leucocins 4010, including a longer lag phase as well as a lower maximum specific growth rate for L. monocytogenes 4010, was negated in the presence of 2.5% (w/v) sodium chloride.     

Serological methods and selective agars to enumerate Campylobacter from broiler carcasses: data from inter- and intralaboratory analyses

Routine analytical means to estimate Campylobacter numbers per milliliter of carcass rinses are needed in high-sample-throughput poultry laboratories. We compared three serological confirmatory tests that were amenable to such a setting when used in conjunction with Campy-Line and Campy-Cefex Campylobacter selective agars. Pre- and post-chlorinated chiller carcass rinse samples were obtained and held on ice, then analyzed 24 h later in two separate laboratories. Presumptive counts on both pre- and postchiller samples from between laboratories on individual agars and between both agars were highly correlated. Agreement among the three serological tests was nearly complete. The use of a premeasured and dried latex anti-Campylobacter antibody agglutination test format was superior to that of either a liquid latex agglutination format or a direct phosphate-buffer microscopic technique in terms of practicality as was the inclusion of an unarmed latex control to detect auto agglutination. A routine procedure for Campylobacter level estimation was suggested. This procedure, when used in conjunction with a serological confirmatory step, should provide processors with a means to assess reductions in numbers per milliliter of carcass rinses versus strictly presence-absence testing.     

浅谈中式实木软体沙发设计

沙发作为客厅中必不可少的家具配置,在人们的生活中起到了越来越重要的作用,中式风格的沙发在日常生活中越来越普遍。本文通过对中式沙发的起源,及中式沙发的类型、设计进行了介绍,指出中式沙发顺应了当前重视文化的时代背景和现代的生活方式,弘扬了中国传统文化和民族特色。     

High-throughput droplet digital PCR system for absolute quantitation of DNA copy number

Digital PCR enables the absolute quantitation of nucleic acids in a sample. The lack of scalable and practical technologies for digital PCR implementation has hampered the widespread adoption of this inherently powerful technique. Here we describe a high-throughput droplet digital PCR (ddPCR) system that enables processing of ~2 million PCR reactions using conventional TaqMan assays with a 96-well plate workflow. Three applications demonstrate that the massive partitioning afforded by our ddPCR system provides orders of magnitude more precision and sensitivity than real-time PCR. First, we show the accurate measurement of germline copy number variation. Second, for rare alleles, we show sensitive detection of mutant DNA in a 100,000-fold excess of wildtype background. Third, we demonstrate absolute quantitation of circulating fetal and maternal DNA from cell-free plasma. We anticipate this ddPCR system will allow researchers to explore complex genetic landscapes, discover and validate new disease associations, and define a new era of molecular diagnostics.     

Controlled Release of Volatile Antimicrobial Compounds from Mesoporous Silica Nanocarriers for Active Food Packaging Applications

Essential oils and their active components have been extensively reported in the literature for their efficient antimicrobial, antioxidant and antifungal properties. However, the sensitivity of these volatile compounds towards heat, oxygen and light limits their usage in real food packaging applications. The encapsulation of these compounds into inorganic nanocarriers, such as nanoclays, has been shown to prolong the release and protect the compounds from harsh processing conditions. Nevertheless, these systems have limited shelf stability, and the release is of limited control. Thus, this study presents a mesoporous silica nanocarrier with a high surface area and well-ordered protective pore structure for loading large amounts of natural active compounds (up to 500 mg/g). The presented loaded nanocarriers are shelf-stable with a very slow initial release which levels out at 50% retention of the encapsulated compounds after 2 months. By the addition of simulated drip-loss from chicken, the release of the compounds is activated and gives an antimicrobial effect, which is demonstrated on the foodborne spoilage bacteria Brochothrix thermosphacta and the potentially pathogenic bacteria Escherichia coli. When the release of the active compounds is activated, a ≥4-log reduction in the growth of B. thermosphacta and a 2-log reduction of E. coli is obtained, after only one hour of incubation. During the same one-hour incubation period the dry nanocarriers gave a negligible inhibitory effect. By using the proposed nanocarrier system, which is activated by the food product itself, increased availability of the natural antimicrobial compounds is expected, with a subsequent controlled antimicrobial effect.