Application of diffusion dialysis in hydrometallurgical separation of nickel from spent Raney Ni catalyst

ABSTRACT

The hydrometallurgical separation of nickel from spent Raney Ni catalyst is based on the dissolution of separated nickel slurry in hot diluted sulphuric acid (H₂SO₄) with the addition of an appropriate oxidation agent. Consecutive diffusion dialysis, which was performed in a two-compartment countercurrent dialyzer with an anion-exchange membrane Neosepta-AFN at steady state, enables the removal of excess of H₂SO₄ from a solution of aluminium and nickel sulphate in H₂SO₄ and simple recycling of the isolated H₂SO₄. Next, the obtained dialysate was alkalized using excess of NaOH solution. Using this procedure, the Ni(OH)₂ contaminated with only 8.9 wt.% Al was obtained.     

Integration of biofuels intermediates production and nutrients recycling in the processing of a marine algae

The cost‐effective production of liquid biofuels from microalgae is limited by several factors such as recovery of the lipid fractions as well as nutrients management. Flash hydrolysis, a rapid hydrothermal process, has been successfully applied to fractionate the microalgal biomass into solid biofuels intermediates while recovering a large amount of the nutrients in the aqueous phase (hydrolyzate) in a continuous flow reactor. The aim of the work is to enhance the quality of a high‐ash containing marine algae Nannochloropsis gaditana as biofuel feedstock while recycling nutrients directly for algae cultivation. Characterization of products demonstrated an increase in extractable lipids from 33.5 to 65.5 wt % (dry basis) while retaining the same fatty acid methyl ester profile, in addition to diminution of more than 70 wt % of ash compared to raw microalgae. Moreover, the hydrolyzate was directly used to grow a microalga of the same genus. © 2016 American Institute of Chemical Engineers AIChE J, 63: 1494–1502, 2017     

Diversity of Biogas Plant Realizations

A techno‐economic analysis for four different types of biogas plant realizations was performed, including one biogas biorefinery concept. For each concept detail, a process flow diagram was created. Mass and energy balances were estimated. The net present value and payback were calculated for each concept for a better feasibility understanding. The results showed that with the used expensive substrate, namely, wheat straw, the obtained paybacks appeared to be more than 100 years. Sensitivity analysis was done for the price range of a substrate. Critical factors were defined to improve feasibility.     

Time-varying system identification using modulating functions and spline models with application to bio-processes

Time dependent parameters are frequently encountered in many real processes which need to be monitored for process modeling, control and supervision purposes. Modulating functions methods are especially suitable for this task because they use the original continuous-time differential equations and avoid differentiation of noisy signals. Among the many versions of the method available, Pearson–Lee method offers a computationally efficient alternative. In this paper, Pearson–Lee method is generalized for non-stationary continuous-time systems and the on-line version is developed. The time dependent parameters are modeled as polynomial splines inside a moving data window and recursion formulae using shifting properties of sinusoids are formulated. The simple matrix update relations considerably reduce the number of computations required when compared with repeatedly using FFT. The method is illustrated for estimating the kinetic rates and yield factors as time-varying parameters in a fermentation process. The Monod law along with temperature dependency models were used to simulate the data. The simulation study shows that it is not necessary to assume a growth model in order to estimate the kinetic rate parameters.     

Notes on the Asymmetric Hydrogenation of Methyl Acetoacetate in Neoteric Solvents

Asymmetric hydrogenation of methyl acetoacetate to methyl (R)-3-hydroxybutyrate by [(R)- RuCl(binap)(p-cymen)]Cl has been studied in methanol-ionic liquid and methanol- dense CO₂ solvent systems. The ionic pairs triethylhexylammonium and 1-methylimidazolium with bis(trifluoromethane sulfonyl) imide and hexafluorophosphates were used. The role of ionic pairs on the kinetic parameters and (enantio)selectivity has been demonstrated. Although the CO₂ expanded methanol system suffered from a reduction in both reaction rate and product selectivity, this changed in the presence of water. The high selectivity of the optimized methanol-CO₂-water-halide system was designed as a consequence of observed additive effects.     

An adsorptive transfer technique coupled with brdicka reaction to reveal the importance of metallothionein in chemotherapy with platinum based cytostatics

The drugs based on platinum metals represent one of the oldest, but also one of the most effective groups of chemotherapeutic agents. Thanks to many clinical studies it is known that resistance of tumor cells to drugs is a frequent cause of chemotherapy failure. With regard to platinum based drugs, multidrug resistance can also be connected with increased expression of low-molecular weight protein metallothionein (MT). This study aimed at investigating the interactions of MT with cisplatin or carboplatin, using the adsorptive transfer technique coupled with differential pulse voltammetry Brdicka reaction (AdTS DPV Brdicka reaction), and a comparison of in vitro results with results obtained in vivo. The results obtained from the in vitro study show a strong affinity between platinum based drugs and MT. Further, we analyzed extracts of neuroblastoma cell lines treated with cisplatin or carboplatin. It is clear that neuroblastoma UKF-NB-4 cisplatin-resistant and cisplatin-sensitive cell lines unlikely respond to the presence of the platinum-based cytostatics cisplatin and carboplatin. Finally, we determined the level of MT in samples from rabbits treated with carboplatin and patients with retinoblastoma treated with the same drug.     

Thermodynamic optimization of the Ni-Zn system

Optimization of thermodynamic and phase diagram data has been performed and consistent sets of coefficients for the calculation of the phase equilibria in the system Ni-Zn have been obtained using the program BINGSS. The δ phase has been modeled as a stoichiometric compound (NiZn₈). The binary liquid and the solid Ni-based solutions have been treated as disordered substitutional phases. The intermediate β, β ₁, and γ compounds have been modeled as phases with substitutional defects and vacancies on two sublattices. The calculated phase diagram and thermodynamic quantities are in excellent agreement with the experimental data.     

Sensitivity to Cisplatin in Head and Neck Cancer Cells Is Significantly Affected by Patient-Derived Cancer-Associated Fibroblasts

Cancer-associated fibroblasts (CAFs) are one of the most abundant and critical components of the tumor stroma. CAFs can impact many important steps of cancerogenesis and may also influence treatment resistance. Some of these effects need the direct contact of CAFs and cancer cells, while some involve paracrine signals. In this study, we investigated the ability of head and neck squamous cell carcinomas (HNSCC) patient-derived CAFs to promote or inhibit the colony-forming ability of HNSCC cells. The effect of cisplatin on this promoting or inhibiting influence was also studied. The subsequent analysis focused on changes in the expression of genes associated with cancer progression. We found that cisplatin response in model HNSCC cancer cells was modified by coculture with CAFs, was CAF-specific, and different patient-derived CAFs had a different “sensitizing ratio”. Increased expression of VEGFA, PGE2S, COX2, EGFR, and NANOG in cancer cells was characteristic for the increase of resistance. On the other hand, CCL2 expression was associated with sensitizing effect. Significantly higher amounts of cisplatin were found in CAFs derived from patients who subsequently experienced a recurrence. In conclusion, our results showed that CAFs could promote and/or inhibit colony-forming capability and cisplatin resistance in HNSCC cells via paracrine effects and subsequent changes in gene expression of cancer-associated genes in cancer cells.     

CSBD Healing in Rats after Application of Bovine Xenogeneic Biomaterial Enriched with Magnesium Alloy

Xenogeneic biomaterials Cerbone^® and OsteoBiol^® are widely used in oral implantology. In dental practice, xenogeneic biomaterial is usually combined with autologous bone to provide bone volume stability needed for long-term dental implants. Magnesium alloy implants dissolve and form mineral corrosion layer that is directly in contact with bone tissue, allowing deposition of the newly formed bone. CSBD heals by intramembranous ossification and therefore is a convenient model for analyses of ostoconductive and osteoinductive properties of different type of biomaterials. Magnesium alloy-enriched biomaterials have not yet been applied in oral implantology. Therefore, the aim of the current study was to investigate biological properties of potentially new bovine xenogeneic biomaterial enriched with magnesium alloy in a 5 mm CSBD model. Osteoconductive properties of Cerabone^®, Cerabone^® + Al. bone, and OsteoBiol^® were also analyzed. Dynamics of bone healing was followed up on the days 3, 7, 15, 21, and 30. Calvary bone samples were analyzed by micro-CT, and values of the bone morphometric parameters were assessed. Bone samples were further processed for histological and immunohistochemical analyses. Histological observation revealed CSBD closure at day 30 of the given xenogeneic biomaterial groups, with the exception of the control group. TNF-α showed high intensity of expression at the sites of MSC clusters that underwent ossification. Osx was expressed in pre-osteoblasts, which were differentiated into mature osteoblasts and osteocytes. Results of the micro-CT analyses showed linear increase in bone volume of all xenogeneic biomaterial groups and also in the control. The highest average values of bone volume were found for the Cerabone^® + Mg group. In addition, less residual biomaterial was estimated in the Cerabone^® + Mg group than in the Cerabone^® group, indicating its better biodegradation during CSBD healing. Overall, the magnesium alloy xenogeneic biomaterial demonstrated key properties of osteoinduction and biodegradidibility during CSBD healing, which is the reason why it should be recommended for application in clinical practice of oral implantology.     

The energy intensity in Lithuania during 1995–2009: A LMDI approach

The measurement, assessment, and effective mitigation of energy intensity compose a foremost objective of contemporary energy policy. Although the European Union (EU) Member States have been experiencing the convergence in energy efficiency indicators, Lithuania, acceded to the EU in 2004, still remains peculiar with relatively high energy intensity. Our study, therefore, is aimed at analyzing the energy intensity trends in Lithuanian economy as a whole as well as in separate economic sectors. The investigation covers the period of 1995–2009. The Logarithmic Mean Divisia Index was applied for decomposition analysis. Our analysis has shown that energy efficiency falls during economic downturn. In order to facilitate these challenges the Lithuanian Government as well as business should opt for increasing energy efficiency in the most problematic sectors of transport and services. In addition, the analysis of legal acts, namely National Energy Efficiency Programme for 2006–2010 and Energy Efficiency Action plan for 2010–2016, was taken into consideration. Some suggestions, thus, were offered for successful implementation of strategic goals outlined in the aforementioned strategic documents.