Chronic toxicity of verapamil on juvenile rainbow trout (Oncorhynchus mykiss): effects on morphological indices, hematological parameters and antioxidant responses

In this study, the toxic effects of verapamil (VRP) were studied on juvenile rainbow trout, Oncorhynchus mykiss, by chronic semi-static bioassay. Fish were exposed to sublethal concentrations of VRP (0.5, 27 and 270 μg/L) for 0, 21 and 42 d. Multiple biomarkers were measured, including morphological indices, hematological parameters and antioxidant responses of different tissues (brain, gill, liver, muscle and intestine). Based on the results, there was no significant change in all parameters measured in fish exposed to VRP at environmental related concentration, but VRP-induced stress in fish exposed to higher concentrations reflected the significant changes of physiological and biochemical responses. Through principal component analysis and integrated biomarker response assessment, effects induced by VRP-stress in each test group were distinguished. Additionally, all parameters measured in this study displayed various dependent patterns to VRP concentrations and exposure time using two-way ANOVA statistic analysis. In short, the multiple responses in fish indicated that VRP induced physiological stress and could be used as potential biomarkers for monitoring residual VRP in aquatic environment; but molecular and genetic mechanisms of these physiological responses in fish are not clear and need to be further studied.     

First direct detection of HONO in the reaction of methylnitrite (CH3ONO) with OH radicals

We report on the development of a new environmental simulation chamber coupled with an in situ continuous wave cavity ring-down spectrometer operating in the near IR (～1.5 μm). The first application reported in this paper dealt with the chemical mechanism of UV photolysis of methyl nitrite (CH(3)ONO) in air. HONO has been detected for the first time and shown to be formed in the OH + CH(3)ONO reaction. A dense spectrum of cis-HONO absorption lines has been observed near 1.5 μm, in agreement with a previous study (Guilmot et al.). CH(2)O has been measured as primary product with good sensitivity and time resolution. In contrast to Zhao et al., we did not detect any NO(2) absorption features in this wavelength range. Calibration experiments provided very low NO(2) absorption cross sections in this region (～10(-25) cm(2)), leading to conclude that NO(2) cannot be observed in this wavelength range in the presence of equal amounts of CH(2)O.     

Rapid annealing of reactively sputtered precursors for Cu2ZnSnS4 solar cells

Cu₂ZnSnS₄ (CZTS) is a promising thin‐film absorber material that presents some interesting challenges in fabrication when compared with Cu(In,Ga)Se₂. We introduce a two‐step process for fabrication of CZTS films, involving reactive sputtering of a Cu‐Zn‐Sn‐S precursor followed by rapid annealing. X‐ray diffraction and Raman measurements of the sputtered precursor suggest that it is in a disordered, metastable CZTS phase, similar to the high‐temperature cubic modification reported for CZTS. A few minutes of annealing at 550 °C are sufficient to produce crystalline CZTS films with grain sizes in the micrometer range. The first reported device using this approach has an AM1.5 efficiency of 4.6%, with J_sc and V_oc both appearing to be limited by interface recombination. Copyright © 2012 John Wiley & Sons, Ltd.     

Pumpspeicherbecken im Karstgrundwasserleiter des Weißen Jura der Schwäbischen Alb

Extensive geological and hydrogeological investigations have been undertaken for the planned pumped-storage hydroelectric power plant in “Blautal” (Swabian Alb, Germany) in order to characterise the Jurassic karst aquifer in which the lower reservoir will be constructed. The preferred option for the plant setup is to integrate the lower reservoir into the groundwater without sealing. Therefore, in order to reliably predict the impact of the pumped storage plant operations on the surrounding drinking water wells and groundwater dependent ecosystems, a comprehensive database has been developed to assess the hydraulic conditions of the karst aquifer. A large scale geological site investigation was carried out to characterise the rock mass and extensive hydraulic tests were performed in many boreholes. The results of the hydraulic characterisation were then implemented in a three dimensional flow model. In this paper, the first results of the geological and hydrogeological investigations are presented and discussed.     

Improved Synthesis of Buprenorphine from Thebaine and/or Oripavine via Palladium‐Catalyzed N‐Demethylation/Acylation and/or Concomitant O‐Demethylation

An improved preparation of buprenorphine via palladium‐catalyzed N‐demethylation/acylation is reported. Three routes were investigated and compared in overall yield. The first involved N‐demethylation/acylation of an advanced intermediate obtained from thebaine followed by hydrolysis of the N‐acetamide and alkylation with cyclopropylmethyl bromide and/or reduction of the N‐acetyl group with the Schwartz reagent followed by N‐alkylation. The second route employed cyclopropylcarboxylic acid anhydride in the N‐demethylation/acylation protocol and subsequent reduction of the cyclopropylcarboxamide by either lithium aluminum hydride or under hydrosilylation conditions. Both of these routes originated in thebaine and therefore required O‐demethylation as a final step. The third route employed an N‐demethylation/acylation sequence starting from oripavine rather than thebaine, thus avoiding the O‐demethylation. The routes are compared for overall efficiency and experimental and spectral data are provided for all new compounds.     

Determination of omega-6 and omega-3 fatty acids in pork adipose tissue with nondestructive Raman and fourier transform infrared spectroscopy

In order to predict omega-6 and omega-3 fatty acids in the diet of humans, seventy-three pork back fat adipose tissue samples were measured with Raman spectroscopy directly on adipose tissue and on melted fat. Melted fat samples were, in addition, measured with Fourier transform infrared (FT-IR) spectroscopy. Gas chromatography analyses were conducted as the reference analysis. Partial least squares regression (PLSR) was used to calibrate and validate all models predicting omega-3 and omega-6 fatty acids contents from spectra. Omega-6 fatty acids in melted fat measured with FT-IR was predicted with a correlation coefficient (R) of 0.93 and a root mean square error of cross-validation (RMSECV) of 1.61% of the total amount of fatty acids. Raman spectra measured on melted fat gave a prediction of omega-6 fatty acids with R=0.97, and RMSECV=0.99% of total amount of fatty acids. Omega-6 fatty acids were predicted with R=0.94, and RMSECV=1.50% of the total amount of fatty acids using Raman spectra recorded on adipose tissue. For omega-3 fatty acids, the highest R=0.91, and lowest RMSECV=0.23% of the total amount of fatty acids were obtained from Raman spectra acquired on melted fat. FT-IR and Raman spectroscopy may be used as rapid, nondestructive methods to determine omega-6 and omega-3 fatty acids in melted fat. Raman spectroscopy can also be used directly on adipose tissue.     

Alkaline Activation of Blends of Metakaolin and Calcium Aluminate

The present paper reports the preliminary results obtained and analyzed in the framework of a joint Spanish–Japanese project on the behavior of blends of alkali-activated metakaolin (MK) and calcium aluminate cement (CAC). In these experiments, the materials were activated with an 8 M solution of NaOH, poured into molds, and subjected to brief thermal curing (2 or 20 h at 85°C). The hardened pastes were tested for mechanical strength and characterized for mineralogy and microstructure by a number of techniques (XRD, FTIR, BSEM, and MAS-NMR). The results showed that under the above conditions, the Al and Ca in the CAC were taken up into the aluminosilicate formed as the main product of the alkali activation of MK. None of the CAC hydration compounds (CAH₁₀; C₂AH₈; C₃AH₆; AH₃) normally formed were detected in any of the cases studied.     

Non-destructive determination of fat,moisture and protein in salmon fillets by use of near-infrared diffuse spectroscopy

Near infrared (NIR) diffuse spectroscopy was used to determine the fat, moisture and protein contents in whole and ground farmed atlantic salmon fillets. A remote fibre-optic probe was used for NIR measurements on 50 whole salmon fillets. The constituent ranges were: 91-205 g kg^?1 fat, 599-709g kg^?1 moisture and 186-209 g kg^?1 protein. Principal component regression resulted in the following prediction errors for ground salmon fillets, expressed as root mean square error of cross validation: 6.6 g kg-1 fat, 3.8 g kg^?1 moisture and 2.0 g kg^?1 protein. The corresponding prediction errors for non-destructive measurements on whole salmon fillets were 10.8 g kg^?1 fat, 8.5 g kg^?1 moisture and 3.7 g kg^?1 protein. Regression models using the 760-1100 m range gave lower prediction errors than models using the 1100-2500 mm or 760-2500 nm ranges. The results show that fibre-optic probe NIR instruments are suited to determine fat and moisture in whole salmon fillets non-destructively.     

Electronically controlled oscillator with linear frequency adjusting for four‐phase or differential quadrature output signal generation

This paper introduces novel four‐phase oscillator employing two Dual‐Output Controlled Gain Current Follower Buffered Amplifiers (DO‐CG‐CFBAs), single Current Amplifier, three resistors, and two grounded capacitors suitable for differential quadrature signal production (floating outputs). To control the frequency of oscillation (FO) and condition of oscillation (CO), only the current gain adjustment of active elements is used. The circuit was designed by well‐known state variable approach. The oscillator employs three active elements for linear control of FO and to adjust CO and provides low‐impedance voltage outputs. Furthermore, two straightforward ways of automatic amplitude gain control were used and compared. Active elements with very good performance are implemented to fulfill required features. Suitable CMOS implementation of introduced DO‐CG‐CFBA was shown. Important characteristics of the designed oscillator were verified experimentally and by PSpice simulations to confirm theoretical and expected presumptions. Copyright © 2013 John Wiley & Sons, Ltd.