Simultaneous measurement of void fraction and fundamental bubble parameters in subcooled flow boiling

Visualization was performed for the vapor bubbles in water subcooled flow boiling in a vertical heated tube to measure simultaneously the void fraction and the four fundamental bubble parameters: nucleation site density, bubble release frequency, bubble lifetime and bubble size. Using the mass flowrate and liquid subcooling as the experimental parameters, the changes of void fraction and bubble parameters with the wall heat flux were measured. The results of image analysis showed that the vapor void fraction could be approximated by the function of nucleation site density and bubble lift-off diameter; the bubble lift-off diameter was more influential than the nucleation site density. It was hence concluded that the bubble lift-off diameter could be regarded as the key parameter to determine the vapor void fraction under the present experimental conditions. The strong relation of bubble lift-off diameter to superheated liquid layer thickness was indicated for the future model development studies of bubble lift-off diameter.     

Analytic Flow Design Method for an Automated Distribution Center with Multiple Shipping Areas

An analytic flow design algorithm for an automated distribution center with multiple shipping areas is presented. The main elements of the analytic flow design are the number of devices and the volumes of product flow between the devices. In the design of an automated distribution center, it is necessary to satisfy the demand throughput while minimizing construction costs. In the conventional design process, system engineers utilize experimental and intuitional approaches. However, conventional approaches are time-consuming and the design outcome is dependent on the skill of the designer. Therefore, a theoretical design algorithm is needed. We propose an analytic flow design algorithm using a dynamic network flow model and considering time-variable flow volumes according to shipment and storage schedules. To verify the feasibility of the proposed method, we perform analytic flow design using real data and confirm that the proposed method can yield a feasible analytic flow design in several minutes.     

A camera calibration technique using three sets of parallel lines

This paper presents a new method for three-dimensional camera calibration in which the rotation parameters are decoupled from the translation parameters. First, the rotation parameters are obtained by projecting three sets of parallel lines independently of the translation parameters and the imaging distance from the lens to the image plane. The virtual line passing through the image center, which is calculated by perspective projection of a set of parallel lines, depends only on the rotation parameters. Next, the translation parameters and the imaging distance are analytically obtained. Experimental results are used to show how the camera model can be accurately reconstructed in an easily prepared environment.     

Frequency spectra of the arc current due to opening electriccontracts in air

Frequency spectra of the electromagnetic noise due to arc current caused by Ag contacts upon opening in air at atmospheric pressure are described. To take into consideration the fast transients and high-frequency discharge phenomena at the contacts, a distributed constant model consisting of relay contacts and a coaxial distributed constant line is introduced. An experiment carried out under conditions of low circuit current (3.84 A) and low source voltage (48 V) is reported. The results indicate that the frequency spectra of the arc currents depends on the length and terminal conditions of the line connected to the contacts     

Low-temperature thermionic emission from nitrogen-doped nanocrystalline diamond films on n-type Si grown by MPCVD

Temperature-dependent emission current–voltage measurements were carried out for nitrogen (N)-doped nanocrystalline diamond (NCD) films grown on n-type Si substrates by microwave plasma-assisted chemical vapor deposition (MP-CVD). Low threshold temperature (~ 260 °C) and low threshold electric field (~ 5 × 10^− 5 V/µm) were observed. Both the temperature dependence and the electric field dependence have shown that the obtained emission current was based on electron thermionic emission from N-doped NCD films. We have also studied the relation between nitrogen concentration and the saturation emission current. The saturation current obtained was as high as 1.4 mA at 5.6 × 10^− 3 V/µm at 670 °C when the nitrogen concentration was 2.4 × 10²⁰ cm^− 3. Low value of effective work function (1.99 eV) and relatively high value of Richardson constant (~ 70) were estimated by well fitting to Richardson–Dushman equation. The results of smaller φ and larger A′ suggest that N-doped NCD has great possibility of being a highly efficient thermionic emitter material.     

The Direct Spectroscopy of Positronium Hyperfine Structure Using a Sub-THz Gyrotron

Positronium is an ideal system for research on Quantum Electrodynamics (QED), especially in a bound state. A discrepancy of 3.9 standard deviations has been found between the measured hyperfine structure (Ps-HFS) and the QED predictions. This may be due to the contribution of unknown new physics or common systematic effects in previous measurements, in all of which the Zeeman effect was used. We propose a new method to directly measure the Ps-HFS using a high power gyrotron. We compare two resonators which have been developed to supply sufficient power to drive the direct transition, a Fabry-Pérot resonator and a ring resonator with a diffraction grating. We plan to perform first direct measurement of Ps-HFS within the next six months.     

Process synthesis by task assignment

An approach by task assignment is presented to determine processing system structures in chemical process design. For given design conditions of major subsystems, which were specified by the results of basic or applied research, a basic flowsheet is determined by task assignments on energy recovery and material flow transportation. An illustrative example shows the usefulness of the present method.     

High-precision voltage-measuring method using fast sampled data for electric power systems

Control and protection equipment in power systems requires higher sensitivity and operational reliability to meet today's changing power system requirements. The voltage-measuring deviation requirement for advanced voltage and var control equipment is less than 0.1 percent under conditions of harmonic distortion in the voltage waveform and power-system frequency variation. Studies on digital signal processing suitable for electric power systems showed that these requirements are satisfied using fast sampling and very fast 32-bit floating point operations by a Digital Signal Processor (DSP). This paper describes the design philosophy of a high-precision power system voltage-measuring method using fast sampled data. In addition, total voltage-measuring deviation characteristics under a combination of the techniques are described along with digital filter characteristics, frequency-measuring deviation characteristics, frequency variation versus gain-compensation characteristics of a digital filter, and peak value operating principles.