High Field ESR System and Its Application to the Study of Quantum Spin Systems

Developments of the high field ESR system in Kobe University is presented. Using Gunn oscillators and backward traveling oscillators (BWO), we can cover the frequency region from 30 to 1183.6 GHz with the use of InSb detector. Pulsed magnetic field up to 30 T is available and we are now trying to extend the field up to 40 T. Temperature range is from 1.8 to 300 K. Using this system, we studied S=1/2 ladder like system Cu₂(C₅H₁₂N₂)₂Cl₄, and found a new magnetic transition at 10.1 T at 1.8 K. The temperature dependence of ESR in Cu₂(C₅H₁₂N₂)₂CI₄ shows g-shift below 8 K which corresponds to the maximum of the magnetic susceptibility. The g-shift below 8 K suggests the increase of the quantum fluctuation in the system, and the role of the quantum fluctuation in Cu₂(C₅H₁₂N₂)₂CI₄ is discussed.     

Newly structured expandable 52-Mbit/s, 48-channel time-division switching LSI with 2.4 Gbit/s throughput

An expandable Si bipolar 2.4 Gbit/s throughput, 52 Mbit/s 48-channel time-division switching LSI system is described. A high-throughput of 2.4 Gbit/s and a power-dissipation of 5.3 W are achieved by adopting a low-voltage swing four-serial-gated differential bipolar circuit design and super self-aligned process (SST-1A) logic-in-memory LSI technology. This LSI is applicable to the digital video time-division switching and digital crossconnect systems of future B-ISDN.<>     

Gigahertz band GaAs monolithic limiting amplifier

The letter presents the design and performance of a gigahertz band limiting amplifier IC using GaAs MESFET IC technology. With a two-chip connection, an AM/PM conversion of 0.7°/dB over 43 dB input dynamic range at 1 GHz has been achieved.     

中国徽州地区农村传统村落街区空间构造的形成——对古徽州地区呈坎村与卢村的调查

街区是构成中国传统村落的基本组团单位，其潜在的含义是居住者的社会组成。本文从社会构成的角度分析街区所反映出来的村落空间形式。     

Effect of catalyst combination on growth of single-walled carbon nanotubes

A new effective catalysts combination of iron — nickel for alcohol CVD technique was found. This catalyst catalyzed well as well as the typical catalyst of iron — cobalt catalysts, but gave a different diameter distribution. Calculating their electrical density of states under the assumption of their solid lattice structures, the result was fairly consistent with experimental results. The number of electrical states near Fermi level that is considered to be important for catalytic reaction is enough and the DOS of iron – nickel catalyst was quite similar to that of cobalt unlike manganese – copper catalyst. Consequently, a blend of catalysts that has a similar DOS to cobalt and has enough states near the Fermi level can be a good catalyst for alcohol CVD.     

Effect of 1/f-type FM noise on semiconductor-laserlinewidth residual in high-power limit

The FM-noise spectrum and the linewidth of 1.3 μm DFB (distributed feedback) semiconductor lasers measured in the high-power state up to 20 mW are discussed. A 5-MHz residual linewidth is observed in the high-power limit. The FM-noise spectrum consists of white noise and 1/f noise. The spectral density of the white noise is reduced by the increase in the output power, whereas that of the 1/f noise is unchanged, which means that the linewidth residual in the high-power limit is caused by the 1/f noise rather than the white noise. The impact of the 1/f-type FM noise on coherent optical communication systems is also discussed     

Speed limit of all-optical gate switches using cascaded second-order nonlinear effect in quasi-phase-matched LiNbO/sub 3/ devices

In all-optical gate switches that employ the cascaded second-order nonlinear effect in quasi-phase-matched (QPM) LiNbO/sub 3/ devices, walkoff between the fundamental and second harmonic pulses is very large. The authors experimentally show that crosstalk of the switch induced by such walkoff limits the switching speed, but that the switching speed can significantly be enhanced by walkoff compensation. Using a 20-mm-long QPM LiNbO/sub 3/ waveguide device, the authors switch one of twin pulses separated by 6.25 ps without crosstalk, showing the possibility of switching a 160-Gb/s signal.     

Adjunctive Application of Antimicrobial Photodynamic Therapy in Nonsurgical Periodontal Treatment: A Review of Literature

Periodontal disease is caused by dental plaque biofilms, and the removal of these biofilms from the root surface of teeth plays a central part in its treatment. The conventional treatment for periodontal disease fails to remove periodontal infection in a subset of cases, such as those with complicated root morphology. Adjunctive antimicrobial photodynamic therapy (aPDT) has been proposed as an additional treatment for this infectious disease. Many periodontal pathogenic bacteria are susceptible to low-power lasers in the presence of dyes, such as methylene blue, toluidine blue O, malachite green, and indocyanine green. aPDT uses these light-activated photosensitizer that is incorporated selectively by bacteria and absorbs a low-power laser/light with an appropriate wavelength to induce singlet oxygen and free radicals, which are toxic to bacteria. While this technique has been evaluated by many clinical studies, some systematic reviews and meta-analyses have reported controversial results about the benefits of aPDT for periodontal treatment. In the light of these previous reports, the aim of this review is to provide comprehensive information about aPDT and help extend knowledge of advanced laser therapy.     

Effect of Support Materials on the Selective Methanation of CO over Ru Catalysts

Selective methanation of CO in the reformate gas (CO/CO₂/H₂/H₂O = 0.175/17.9/70.9/11.1) proceeded over Ru catalysts supported on metal oxides and zeolites. CO was selectively methanated at wide temperature ranges (200–275 °C) over Ru/γ-Al₂O₃, Ru/TiO₂ Ru/H-Y and Ru/H-beta catalysts. Higher Ru contents in Ru/γ-Al₂O₃ improved the selective CO methanation rate.