Fundamental welding R&D results for manufacturing vacuum vessel of JT-60SA

The real vacuum vessel (VV) manufacturing of JT-60SA has started since November 2009 at Toshiba. Prior to starting manufacturing, fundamental welding R&Ds had been performed by three stages. In the first stage, primary tests for screening welding method were performed. In the second stage, the trial welding for 1 m-long straight and curved double shell samples were conducted. The dependences of welding quality and distortion on the welding conditions, such as arc voltage and current, setting accuracy, welding sequence, and the shape of grooves were studied. In addition, welding condition with low heat input was explored. In the last stage, fabrication sequence was confirmed and established by the trial manufacturing of the 20° upper half mock-up [1]. This paper presents the R&D results obtained in the first and second stages.     

Liquidus and solidus temperatures of Ni-solid solution in Ni-Al-X (X: V, Nb and Ta) ternary systems

A systematic investigation was carried out to determine both liquidus and solidus surfaces of the Ni-solid solution (γ) in the Ni-Al-X ternary phase diagrams successively by differential thermal analysis (DTA) technique. Each of the Group V elements of the periodic table, V, Nb, and Ta, was chosen as a ternary additive X in the present study. The γ-solvus was also taken into account in determining a temperature range for a solid solution treatment above the γ-solvus, i.e., “the window,” as well as the maximum solubility limit of γ-Ni solid solution.     

A case of cavernous dural arteriovenous fistula resulting in intracerebral extravasation during transvenous embolization

Cortical venous drainage has been described as one of the major risk factors for dural arteriovenous fistula, which may induce venous hypertension leading to venous ischemia or intracerebral hemorrhage. However, it is rather rare to observe cortical venous drainage manifesting in this way in the cavernous sinus region. We report a case of a 55-year-old gentleman with a right cavernous dural arteriovenous fistula, presenting with conjunctival chemosis, exophthalmus and ocular hypertension on the affected side. Magnetic resonance imaging showed a small intracerebral hemorrhage in the right frontal lobe. Cerebral angiography revealed a dural arteriovenous fistula in the right cavernous sinus draining into the right olfactory vein via the uncal vein, as well as into the superior and inferior ophthalmic veins. This unusual cortical venous reflux was thought to be consistent with the intracerebral hemorrhage found on the magnetic resonance imaging. The patient underwent transvenous embolization for the dural arteriovenous fistula using an inferior petrosal catheterization into the uncal vein was difficult, and the cortical venous reflux through the vein seemed to be slight. However, extravasation of the contrast material occurred in the right frontal lobe after obliteration of the ophthalmic veins during the procedure. The cause of the extravasation was suspected to be the same olfactory vein that had been involved in the previous intracerebral hemorrhage. The obliteration of the dural fistula was continued rapidly, and the fistula disappeared after the embolization. Neurologically, the patient had no noticeable troubles, except for a mild headache. The pretreatment symptoms were alleviated within several days, and the patient was discharged in a week. We emphasize the following points from this rare case in order to facilitate a safer procedure during transvenous embolization for cavernous dural arteriovenous fistula. It is important to obliterate the cortical venous drainage as early as possible, even if the reflux is small or the catheterization is difficult. Repeated, careful sinography is useful for the evaluation of the drainage pattern at certain stages during the transvenous embolization procedure.     

Digital image-based modeling applied to the homogenization analysis of composite materials

Absract The systematic methodologies to derive accurate microstructural models are developed for studying the mechanical behaviors of composite materials. Since the geometric information of a microstructure is often given by an image or a set of images, the direct interpretation of the geometry is possibly by digitizing it. By identifying each pixel or voxel with a finite element (FE) and accompanying appropriate image processing, an FE model can be automatically generated. It is also emphasized that the digitized models can be suitable for solving the FE equations by utilizing the uniformity of the FE mesh. The finite element analysis (FEA) with the homogenization method enables the prediction the thermo-mechanical behavior of the periodic microstructure (unit cell) as well as the global mechanical response of a structural component, while we are taking into account the specific effect of the geometric structural configuration of the microstructure through digitization. Several kinds of the digitizing techniques are presented to illustrate the potential of digital image-based (DIB) FE modeling of the unit cell. Keeping the microstructural design in mind, the modification of the plane image is introduced and the virtual realization of the unit cell geometry is presented so that a microstructural analysis utilizing the homogenization method would be realistic.     

A compact thin-film-based all-pass device for the compensation of the in-band dispersion in FBG filters

Fiber Bragg grating (FBG)-based bandpass filters, while possessing close to ideal sharp rolloff characteristics, can suffer from a significant amount of in-band dispersion. Results concerning the compensation of the in-band dispersion of a typical 100-GHz FBG using two thin-film all-pass filters, each composed of two coupled-cavities packaged in a compact configuration, are presented. The total peak insertion loss of the compensation package is less than 2.5 dB.     

Frontopolar ictal epileptiform discharges on scalp electroencephalogram in temporal lobe epilepsy

OBJECTIVE: To determine the prevalence of the smoking habit among Mexican physicians as well as some of their attitudes and information on specific issues concerning smoking. MATERIAL AND METHODS: In 1993, a survey was carried out among 3,568 physicians of the three major official health care institutions in Mexico City. A questionnaire designed for The Mexican National Survey of Addictions (ENA 1993) was used. Prevalence of cigarette smoking, age of onset, number of cigarettes per day; also information and attitudes concerning smoking were assessed. RESULTS: The mean age was 37, 66% were males. Of the 3,488 (98%) surveyed, 26.9% were smokers (62% daily), 20.6% were ex-smokers and 52.5% non-smokers. There were differences related to age and sex (p < 0.05). Of daily smokers, 36% smoked between 1 and 5 cigarettes. There was a significant trend among ex-smokers that linked the time they had ceased smoking with the fear to start smoking again. Physicians were well informed of the relationship between cigarette smoking and lung cancer. Over 80% considered tobacco an addictive drug but only 65% were in favor of banning smoking from their workplaces and over 10% were not aware that it is forbidden to smoke inside health care facilities. CONCLUSIONS: These results differ from other studies that find the prevalence of smoking among physicians lower than in the general population. Our study revealed a greater prevalence of the smoking habit among female physicians and the number of cigarettes smoked per day was greater than in the general population regardless of sex.     

Transmission of 2-ps optical pulses at 1550 nm over 40-km standardfiber using midspan optical phase conjugation in semiconductor opticalamplifiers

We demonstrate transmission of 2-ps optical pulses at 1550 nm over 40 km of standard fiber by employing midspan optical phase conjugation in semiconductor optical amplifiers (SOAs). The second-order group-velocity dispersion of the fiber is completely compensated and the third-order dispersion becomes a major transmission limitation. This experiment shows that the midspan optical phase conjugation system using SOAs is applicable to ultrahigh bit rates greater than 100 Gb/s     

An in-frame deletion in peripheral myelin protein-22 gene causes hypomyelination and cell death of the Schwann cells in the new Trembler mutant mice

Cloning and sequencing of the peripheral myelin protein-22 cDNA and genomic DNA from newly found Trembler mice revealed an in-frame deletion including exon IV which codes for the second (TM2) and a part of third (TM3) transmembrane domain of peripheral myelin protein-22. This mutation was distinct from those in both other allelic Trembler and Trembler-J mice, which carry point mutations within the putative transmembrane spanning regions of peripheral myelin protein-22. Inheritance was autosomal dominant. The affected mice revealed an abnormal gait, which appeared at 15-20 days of age, followed by motor and sensory ataxia, which remained throughout life. Most of the affected mice could survive more than one year. One of the most notable pathological phenotypes was a giant vacuolar formation in the sciatic nerve of homozygotes. They vary in size within the cytoplasm of Schwann cells, which failed to assemble myelin at any ages studied. Heterozygotes showed normal myelination during the early postnatal stages, followed by a segmental demyelination at an advanced stage. Vacuolar formation was not so frequent as in the homozygotes. These results suggest that the missing of transmembrane spanning region (TM2 and TM3) of peripheral myelin protein-22 may disturb a dual biological function of peripheral myelin protein-22, leading to a dysmyelination of axons and to a vacuolar formation within the cytoplasm of the Schwann cells. The latter phenotype is discussed in conjunction with the disruption of an intracellular transport system and subsequent cell death.