Reliability Based Design Optimization Using Design Explorer

Experimental design methods can be applied to engineering design activities to understand which variables affect the system under consideration, how these variables affect the system, and how to select variable settings that will give uniformly long life to the system. The objective of this paper is to demonstrate the use of Design and Analysis of Computer Experiment (DACE) methods (Sacks, J. et al., 1989) and design optimization via the Surrogate Management Framework (Booker, A. J. et al., 1999; Audet, C. et al., 2000) on reliability optimization problems. Reliabilities are calculated using the Probabilistic Structural Analysis Method (Palle Thoft–Christensen and Baker, 1982; Achintya Haldar and Sankaran Mahadevan, 2000), a method for estimation of reliabilities and reliability indices for a structural model given probability distributions for design variables and “environmental” variables such as loads. By maximizing reliability, or minimizing the probability of failure, we attempt to achieve a minimum cost design that is affected minimally by the variability in the design variables.     

Managed Care: Implications for School Psychology. Comment.

Comments on the article by Sanchez and Turner (see record 2003-03405-005) examining the implications for practice and training in psychology in the era of managed care. The current author states that Sanchez and Turner should be commended. Their article amplifies and clarifies critical issues psychologists must consider while practicing within an era increasingly shaped by health insurance policies and practices. Nevertheless, the author feels that several intriguing facets of managed care were not highlighted. Discussion focuses on the impact that reimbursement and managed care is having on school (and clinical) psychologists. The author points out that it is unknown to what extent managed care may (and has) altered psychological services delivered by school psychologists. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A novel polarizer‐free dye‐doped polymer‐dispersed liquid crystal for reflective TFT displays

Abstract— A novel preparation method for dichroic dye‐doped polymer‐dispersed liquid crystals has been developed. This was achieved by creating a porous polymer matrix first by washing out the liquid crystal from a polymer‐dispersed liquid crystal (PDLC), which is then refilled with dye‐doped liquid crystal. Optimizing the liquid crystal used in the refilling results in decreased turn‐on voltage and faster response time. Poster‐standard reflectivity and newspaper‐standard contrast was demonstrated with a 3.8‐in. QVGA reflective TFT display with a drive voltage of 10 V.     

Less cyber,more café: Enhancing existing small businesses across the digital divide with ICTs

About 10% of the world has access to information and communication technologies (ICTs). Telecenters and cyber cafés are one prevalent way to increase access. This paper suggests increasing access through currently existing, local businesses where people already gather and where proprietors already posses existing business relationships with suppliers and customers. This paper questions the prevailing emphasis on the “cyber'' characteristics of access, e.g., computing and internet access as is currently known, and attempts to refocus the conversation by considering computing and access in the context of the “café,” e.g., as public life in the sense of Habermas, which permits an in situ evolution of relevant access. This analysis is based on extant literature and direct ethnographic research in several public places in six countries. We offer example design perspectives based on a reflection of “third places” as inspiration for appropriate innovation in the provision of computing and communications. © 2005 Wiley Periodicals, Inc.     

A Study of Mill Power as a Function of Media Type and Shape

ABSTRACT

The mill power of a laboratory scale tumbling media mill was determined for the different shapes of media which are used industrially for dry grinding of quartz to produce silica flow. The tested media were ceramic balls and cylinders of high density alumina, and natural flint pebbles; tests were performed over ranges of filling levels and rotational speeds, with and without lifters in the mill. The experiments showed that ceramic balls at low levels of ball charge slipped excessively against the mill wall when the mill interior was smooth and without lifters. The use of lifters gave a consistent tumbling action and, under otherwise comparable conditions, mill power was linearly proportional to media density. Equations were developed which enable the comparison of mill conditions which give the same mill power draw for the different shapes and densities. Combined with studies of grinding kinetics, this enables comparison of the grinding efficiencies for different media shapes.     

Design of acoustic beam aperture modifier using gradient-index phononic crystals

This article reports the design concept of a novel acoustic beam aperture modifier using butt-jointed gradient-index phononic crystals (GRIN PCs) consisting of steel cylinders embedded in a homogeneous epoxy background. By gradually tuning the period of a GRIN PC, the propagating direction of acoustic waves can be continuously bent to follow a sinusoidal trajectory in the structure. The aperture of an acoustic beam can therefore be shrunk or expanded through change of the gradient refractive index profiles of the butt-jointed GRIN PCs. Our computational results elucidate the effectiveness of the proposed acoustic beam aperture modifier. Such an acoustic device can be fabricated through a simple process and will be valuable in applications, such as biomedical imaging and surgery, nondestructive evaluation, communication, and acoustic absorbers.     

Space–time interface-tracking with topology change (ST-TC)

To address the computational challenges associated with contact between moving interfaces, such as those in cardiovascular fluid–structure interaction (FSI), parachute FSI, and flapping-wing aerodynamics, we introduce a space–time (ST) interface-tracking method that can deal with topology change (TC). In cardiovascular FSI, our primary target is heart valves. The method is a new version of the deforming-spatial-domain/stabilized space–time (DSD/SST) method, and we call it ST-TC. It includes a master–slave system that maintains the connectivity of the “parent” mesh when there is contact between the moving interfaces. It is an efficient, practical alternative to using unstructured ST meshes, but without giving up on the accurate representation of the interface or consistent representation of the interface motion. We explain the method with conceptual examples and present 2D test computations with models representative of the classes of problems we are targeting.     

Effect of wobbling mass modeling on joint dynamics during human movements with impacts

In automated mechanical transmissions, engaging sleeve with clutch gear causes the switches of mechanical coupling modes of engaging-related parts, and impacts may happen to make the part speeds have discrete transitions during the engaging. The two characters make the engaging process exhibit both continuity and discreteness. The aim of the paper is to develop a high-fidelity model to capture the trajectories of the parts in the transmission. We treat the engaging as a two-phase process—sleeve first interacting with synchro ring and then with clutch gear. The part movements under a certain constraint are governed by multibody dynamics, and the speed jumps caused by impacts are described using the Poisson coefficient of restitution. To couple the continuous evolutions and discrete transitions of the states, a hybrid automaton model is developed. This model allows for the characteristic analysis of the engaging process with multiple interaction cases between the engaging-related parts, and it is validated by bench tests. The effects of two key factors—the relative tooth position of sleeve and clutch gear and the shifting force—on engaging duration and impact are studied through numerical simulations.