Biodegradability of biomass pyrolysis oils: Comparison to conventional petroleum fuels and alternatives fuels in current use

Concern with environmental issues such as global climate change has stimulated research into the development of more environmentally friendly technologies and energy sources. One critical area of our economy is liquid fuels. Fast pyrolysis of lignocellulosic biomass for liquids production is of particular concern, as it is one of the most interesting ways to produce renewable liquid fuel for transport and heat and power production.The aerobic biodegradability of various pyrolysis oils from different origins and of a EN 590 diesel sample was examined using the Modified Sturm (OECD 301B). The results demonstrate that all fast pyrolysis oils assessed are biodegradable with similar shaped curves with 41–50% biodegradation after 28 days, whereas the diesel sample reached only 24% biodegradation. Since pyrolysis oils achieved biodegradability over 20% these are classified as inherently biodegradable. Modelling of biodegradation processes was successfully performed with a first-order chemical reaction.The biodegradability results obtained for biomass pyrolysis oils are compared to those of conventional and alternative fuels.     

Polyethylene multiwalled carbon nanotube composites

Polyethylene (PE) multiwalled carbon nanotubes (MWCNTs) with weight fractions ranging from 0.1 to 10 wt% were prepared by melt blending using a mini-twin screw extruder. The morphology and degree of dispersion of the MWCNTs in the PE matrix at different length scales was investigated using scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM) and wide-angle X-ray diffraction (WAXD). Both individual and agglomerations of MWCNTs were evident. An up-shift of 17 cm⁻¹ for the G band and the evolution of a shoulder to this peak were obtained in the Raman spectra of the nanocomposites, probably due to compressive forces exerted on the MWCNTs by PE chains and indicating intercalation of PE into the MWCNT bundles. The electrical conductivity and linear viscoelastic behaviour of these nanocomposites were investigated. A percolation threshold of about 7.5 wt% was obtained and the electrical conductivity of PE was increased significantly, by 16 orders of magnitude, from 10⁻²⁰ to 10⁻⁴ S/cm. The storage modulus (G′) versus frequency curves approached a plateau above the percolation threshold with the formation of an interconnected nanotube structure, indicative of ‘pseudo-solid-like’ behaviour. The ultimate tensile strength and elongation at break of the nanocomposites decreased with addition of MWCNTs. The diminution of mechanical properties of the nanocomposites, though concomitant with a significant increase in electrical conductivity, implies the mechanism for mechanical reinforcement for PE/MWCNT composites is filler-matrix interfacial interactions and not filler percolation. The temperature of crystallisation (T_c) and fraction of PE that was crystalline (F_c) were modified by incorporating MWCNTs. The thermal decomposition temperature of PE was enhanced by 20 K on addition of 10 wt% MWCNT.     

Extreme catalysts from low-temperature environments

Cold-loving or psychrophilic organisms are widely distributed in nature as a large part of the earth's surface is at temperatures around 0 degrees C. To maintain metabolic rates and to prosper in cold environments, these extremophilic organisms have developed a vast array of adaptations. One main adaptive strategy developed in order to cope with the reduction of chemical reaction rates induced by low temperatures is the synthesis of cold-adapted or psychrophilic enzymes. These enzymes are characterized by a high catalytic activity at low temperatures associated with a low thermal stability. A study of protein adaptation strategies suggests that the high activity of psychrophilic enzymes could be achieved by the destabilization of the active site, allowing the catalytic center to be more flexible at low temperatures, whereas other protein regions may be destabilized or as rigid as their mesophilic counterparts. Due to these particular properties, psychrophilic enzymes offer a high potential not only for fundamental research but also for biotechnological applications.     

Differentiation of apple juice samples on the basis of heat treatment and variety using chemometric analysis of MIR and NIR data

The potential of mid-infrared (MIR) and near-infrared (NIR) spectroscopy for their ability to differentiate between apple juice samples on the basis of apple variety and applied heat-treatment was evaluated. The heat-treatment involved exposure of juice samples (15 ml) for 30 s in a 900 W microwave oven and the apple varieties used to produce the juice samples were Bramley, Elstar, Golden Delicious and Jonagold. The chemometric procedures applied to the MIR and NIR data were partial least squares regression (PLS1 for differentiation on the basis of heat-treatment, PLS2 for varietal differentiation) and linear discriminant analysis (LDA) applied to principal component (PC) scores. PLS1 and PLS2 gave the highest level of correct classification of the apple juice samples according to heat-treatment (77.2% for both MIR and NIR data) and variety (78.3–100% for MIR data; 82.4–100% for NIR data), respectively.     

Spray Drying of Skim Milk Mixed with Milk Permeate: Effect on Drying Behavior,Physicochemical Properties,and Storage Stability of Powder

The possibility of using milk permeate (MP) to lower the protein level of skim milk powder (SMP) in producing powders of 34% and lower protein is explored. Skim milk suspensions with various levels of MP were prepared by mixing SMP and MP powder (MPP) at the ratios of 1:0, 7:3, 3:7, and 0:1: from 34 to 5.3% protein. The suspensions were dried in a spray dryer with inlet and outlet temperatures of 180 and 80°C, respectively. Increasing permeate concentration in the mixture showed a greater tendency to stickiness manifested by lowered the cyclone recovery of the powder as more powder stuck on the wall of the dryer. Increasing permeate concentration in the resultant powder did not significantly affect the bulk density but led to a reduction in the particle size and also made the powder slight green and yellowish in color. It also found to lower the glass transition temperature (T_g ) of the skim milk powder (SMP) and induce crystallization of lactose at lower water activity (a_w  ≥ 0.328 for SMP:MPP of 3:7 and 0:1 compared to a_w  ≥ 0.0.432 for SMP:MPP of 1:0 and 3:7). Addition of MP in SMP lowered the T_g values of the resulting powders. The permeate fraction in spray-dried SMP/MPP mixtures found to lower the critical a_w and moisture content, suggesting the SMP mixed with MPP is more likely to become sticky than SMP alone (at 34% protein) when stored at a similar water activity and moisture content.     

Less cyber,more café: Enhancing existing small businesses across the digital divide with ICTs

About 10% of the world has access to information and communication technologies (ICTs). Telecenters and cyber cafés are one prevalent way to increase access. This paper suggests increasing access through currently existing, local businesses where people already gather and where proprietors already posses existing business relationships with suppliers and customers. This paper questions the prevailing emphasis on the “cyber'' characteristics of access, e.g., computing and internet access as is currently known, and attempts to refocus the conversation by considering computing and access in the context of the “café,” e.g., as public life in the sense of Habermas, which permits an in situ evolution of relevant access. This analysis is based on extant literature and direct ethnographic research in several public places in six countries. We offer example design perspectives based on a reflection of “third places” as inspiration for appropriate innovation in the provision of computing and communications. © 2005 Wiley Periodicals, Inc.     

NDVI from low altitude aircraft and composited NOAA AVHRR data for scaling Arctic ecosystem fluxes

The relationship between normalized difference vegetation index (NDVI) patterns obtained from high spatial resolution aircraft and low spatial resolution satellite data (Advanced Very High Resolution Radiometer (AVHRR)) was investigated with the intent of using multilevel data to scale carbon flux models in Arctic tundra ecosystems. Despite variable illumination conditions during the aircraft missions and maximum value compositing of the AVHRR data, the difference between 3?km average aircraft and AVHRR NDVI values was generally constant along each flight transect. However, the magnitude of the offset differed between flight dates and small lakes had a greater effect on area averaged aircraft NDVI values than on the satellite values. A cloud index was calculated using incident solar radiation measured by the aircraft and this index was used to identify periods when the aircraft NDVI values may have been biased by cloud cover. Removal of NDVI values based on a cloud index threshold did not appear to be justified given the marginal improvement in the relationship between the two NDVI datasets. If the systematic difference between AVHRR and aircraft NDVI values can be determined, then the scaling of carbon flux models based on the NDVI should be a viable approach in Arctic ecosystems.