Soft X‐ray Ptychographic Imaging and Morphological Quantification of Calcium Silicate Hydrates (C–S–H)

Morphological details of calcium silicate hydrate (C–S–H) stemming from the hydration process of Portland cement (PC) phases are crucial for understanding the PC‐based systems but are still only partially known. Here we introduce the first soft X‐ray ptychographic imaging of tricalcium silicate (C₃S) hydration products. The results are compared using both scanning transmission X‐ray and electron transmission microscopy data. The evidence shows that ptychography is a powerful method to visualize the details of outer and inner product C–S–H of fully hydrated C₃S, which have fibrillar and an interglobular structure with average void sizes of 20 nm, respectively. The high‐resolution ptychrography image enables us to perform morphological quantification of C–S–H, and, for the first time, to possibly distinguish the contributions of inner and outer product C–S–H to the small angle scattering of cement paste. The results indicate that the outer product C–S–H is mainly responsible for the q^?3 regime, whereas the inner product C–S–H transitions to a q^?2 regime. Various hypotheses are discussed to explain these regimes.     

Antimicrobial Efficacy of a Novel Eucalyptus Oil,Chlorhexidine Digluconate and Isopropyl Alcohol Biocide Formulation

Effective surface disinfection is a fundamental infection control strategy within healthcare. This study assessed the antimicrobial efficacy of novel biocide formulations comprising 5% and 2% eucalyptus oil (EO) combined with 2% chlorhexidine digluconate (CHG) and 70% isopropyl alcohol (IPA) contained within a wipe. The efficacy of this novel antimicrobial formulation to remove and eliminate methicillin-resistant Staphylococcus aureus (MRSA), Escherichia coli and Candida albicans from steel surfaces was investigated. Adpression studies of pre-contaminated wipes were also utilised to assess their potential to induce cross-contamination between hard surfaces. Furthermore, the bactericidal nature of the EO-formulation was established in addition to time-kill. The EO-containing formulations demonstrated bactericidal antimicrobial efficacy against all microorganisms and did not induce surface cross-contamination. There was no significant difference (p < 0.05) between the 5% and 2% EO formulations in their ability to remove microorganisms from steel surfaces, however both significantly (p < 0.05) removed more than the control formulations. Microbial biofilms were eliminated within 10 min (p < 0.05) when exposed to the EO formulations. Our novel EO-formulation demonstrated rapid antimicrobial efficacy for potential disinfection and elimination of microbial biofilms from hard surfaces and may therefore be a useful adjunct to current infection control strategies currently employed within healthcare facilities.     

A boronic acid-based fluorescent hydrogel for monosaccharide detection

A boronic acid-based anthracene fluorescent probe was functionalised with an acrylamide unit to incorporate into a hydrogel system for monosaccharide detection. In solution, the fluorescent probe displayed a strong fluorescence turn-on response upon exposure to fructose, and an expected trend in apparent binding constants, as judged by a fluorescence response where D-fructose>D-galactose>D-mannose>D-glucose. The hydrogel incorporating the boronic acid monomer demonstrated the ability to detect monosaccharides by fluorescence with the same overall trend as the monomer in solution with the addition of D-fructose resulting in a 10-fold enhancement (≤0.25 mol/L).     

Metabolomic Profiling of Plasma from Melioidosis Patients Using UHPLC-QTOF MS Reveals Novel Biomarkers for Diagnosis

To identify potential biomarkers for improving diagnosis of melioidosis, we compared plasma metabolome profiles of melioidosis patients compared to patients with other bacteremia and controls without active infection, using ultra-high-performance liquid chromatography-electrospray ionization-quadruple time-of-flight mass spectrometry. Principal component analysis (PCA) showed that the metabolomic profiles of melioidosis patients are distinguishable from bacteremia patients and controls. Using multivariate and univariate analysis, 12 significant metabolites from four lipid classes, acylcarnitine (n = 6), lysophosphatidylethanolamine (LysoPE) (n = 3), sphingomyelins (SM) (n = 2) and phosphatidylcholine (PC) (n = 1), with significantly higher levels in melioidosis patients than bacteremia patients and controls, were identified. Ten of the 12 metabolites showed area-under-receiver operating characteristic curve (AUC) >0.80 when compared both between melioidosis and bacteremia patients, and between melioidosis patients and controls. SM(d18:2/16:0) possessed the largest AUC when compared, both between melioidosis and bacteremia patients (AUC 0.998, sensitivity 100% and specificity 91.7%), and between melioidosis patients and controls (AUC 1.000, sensitivity 96.7% and specificity 100%). Our results indicate that metabolome profiling might serve as a promising approach for diagnosis of melioidosis using patient plasma, with SM(d18:2/16:0) representing a potential biomarker. Since the 12 metabolites were related to various pathways for energy and lipid metabolism, further studies may reveal their possible role in the pathogenesis and host response in melioidosis.     

Characterizing In‐Plane Geometrical Variability in Textile Ceramic Composites

We present a methodology for characterizing and reconstructing in‐plane weave variability in textile composites. Surface topography of a partially processed C‐fiber/SiC matrix composite panel was measured using digital image correlation. The centroids of tow segments that appear periodically on the fabric surface were located by image analysis and used as fiducial markers. Stochastic deviations of the fiducial markers from the ideal periodic weave structure indicate geometrical variance. Fourier analysis shows that spatial wavelengths of the deviations range from the size of one unit cell to the dimensions of the entire panel. Long‐range deviations are attributed principally to fabric deformation after manufacture, during handling. Short‐range fluctuations, extracted by computing spatial derivatives of the positions of the fiducial markers, are attributed to variations in tow packing density that arises during weaving. A simple set of statistics for these deviations is presented and its use in generating stochastic virtual specimens is demonstrated.     

Modeling the dynamics of tamponade multicomponent gases during retina reattachment surgery

Vitrectomy and pneumatic retinopexy are common surgical procedures used to treat retinal detachment. To reattach the retina, gases are used to inflate the vitreous space allowing the retina to attach by surface tension and buoyancy forces that are superior to the location of the bubble. These procedures require the injection of either a pure tamponade gas, such as C₃F₈ or SF₆, or mixtures of these gases with air. The location of the retinal detachment, the anatomical spread of the retinal defect, and the length of time the defect has persisted, will determine the suggested volume and duration of the gas bubble to allow reattachment. After inflation, the gases are slowly absorbed by the blood allowing the vitreous to be refilled by aqueous. We have developed a model of the mass transfer dynamics of tamponade gases during pneumatic retinopexy or pars plana vitrectomy procedures. The model predicts the expansion and persistence of intraocular gases (C₃F₈, SF₆), oxygen, nitrogen, and carbon dioxide, as well as the intraocular pressure. The model was validated using published literature in rabbits and humans. In addition to correlating the mass transfer dynamics by surface area, permeability, and partial pressure driving forces, the mass transfer dynamics are affected by the percentage of the tamponade gases. Rates were also correlated with the physical properties of the tamponade and blood gases. The model gave accurate predictions in humans. © 2017 American Institute of Chemical Engineers AIChE J, 63: 3651–3662, 2017     

Spray Drying of Skim Milk Mixed with Milk Permeate: Effect on Drying Behavior,Physicochemical Properties,and Storage Stability of Powder

The possibility of using milk permeate (MP) to lower the protein level of skim milk powder (SMP) in producing powders of 34% and lower protein is explored. Skim milk suspensions with various levels of MP were prepared by mixing SMP and MP powder (MPP) at the ratios of 1:0, 7:3, 3:7, and 0:1: from 34 to 5.3% protein. The suspensions were dried in a spray dryer with inlet and outlet temperatures of 180 and 80°C, respectively. Increasing permeate concentration in the mixture showed a greater tendency to stickiness manifested by lowered the cyclone recovery of the powder as more powder stuck on the wall of the dryer. Increasing permeate concentration in the resultant powder did not significantly affect the bulk density but led to a reduction in the particle size and also made the powder slight green and yellowish in color. It also found to lower the glass transition temperature (T_g ) of the skim milk powder (SMP) and induce crystallization of lactose at lower water activity (a_w  ≥ 0.328 for SMP:MPP of 3:7 and 0:1 compared to a_w  ≥ 0.0.432 for SMP:MPP of 1:0 and 3:7). Addition of MP in SMP lowered the T_g values of the resulting powders. The permeate fraction in spray-dried SMP/MPP mixtures found to lower the critical a_w and moisture content, suggesting the SMP mixed with MPP is more likely to become sticky than SMP alone (at 34% protein) when stored at a similar water activity and moisture content.     

A SEMI-EMPIRICAL APPROACH TO OPTIMISE THE QUANTITY OF DRYING AIDS REQUIRED TO SPRAY DRY SUGAR-RICH FOODS

ABSTRACT

A semi-empirical linear equation has been developed to optimise the amount of maltodextrin additive (DE 6) required to successfully spray dry a sugar-rich product on the basis of its composition. Based on spray drying experiments, drying index values for individual sugars (sucrose, glucose, fructose) and citric acid were determined, and using these index values an equation for model mixtures of these components was established. This equation has been tested with two sugar-rich natural products, pineapple juice and honey. The relationship was found to be valid for these products.     

An improved accelerated weathering protocol to anticipate Florida exposure behavior of coatings

A new accelerated weathering protocol has been developed which closely replicates the performance of automotive and aerospace coating systems exposed in South Florida. IR spectroscopy was used to verify that the chemical composition changes that occurred during accelerated weathering in devices with a glass filter that produced a high fidelity reproduction of sunlight’s UV spectrum matched those that occurred during natural weathering. Gravimetric water absorption measurements were used to tune the volume of water absorption during accelerated weathering to match that which occurred during natural weathering in South Florida. The frequency of water exposure was then scaled to the appropriate UV dose. A variety of coating systems were used to verify the correlation between the physical failures observed in the accelerated weathering protocol and natural weathering in South Florida. The new accelerated weathering protocol correctly reproduced gloss loss, delamination, cracking, blistering, and good performance in a variety of diverse coating systems. For automotive basecoat/clearcoat paint systems, the new weathering protocol shows significant acceleration over both Florida and previous accelerated weathering tests. For monocoat aerospace systems, the new weathering protocol showed less acceleration than for automotive coatings, but was still an improvement over previous accelerated tests and was faster than Florida exposure.