Quantitative determination of corrosion products and adsorbed water on copper in humid air containing SO2 by IR-RAS measurements

The time dependency of the amounts of corrosion products and co-existing adsorbed water on copper in humid air containing SO₂ was estimated from a series of in situ time-resolved IR-RAS spectra on the basis of the relations between the band intensities and the mass changes of the corrosion products, which were determined by simultaneous measurement of IR-RAS and QCM. The amounts of both corrosion products increased slowly at the initial stage and later increased rapidly. Although the relative humidity was kept constant, the amount of adsorbed water increased nearly the same behavior as that of corrosion products in the stage of relatively small amounts of corrosion products and later increased rapidly when the amounts of corrosion products increased. In humid air without SO₂, sulfite gradually decomposed and some of it changed into sulfate.     

An Advanced Oscillation Mixing Method for Improving the Cooling Uniformity in Quenching

In quenching, the cooling uniformity is most important to diminish distortion occurring on work pieces. As a trial to accomplish uniform cooling, therefore, there exist various mixing methods of a quenchant and the quenchant circulation with an external pump has so far been the well accepted mixing method. However, this study proposes an advanced oscillation mixing method that can improve more the cooling uniformity in quenching. The proposed method includes a stirrer in oscillating motion, so that the simultaneous oscillating and mixing movements of the stirrer are considered to provide efecfively the uniform cooling characteristics for the quenchant. In comparison with the case of the circulation pump mixing, the investigation using the oscillation mixing method has demonstrated the following two experimental facts:(1) the short vapor blanket stage caused by the quick breakage of the oil vapor blanket and (2) the reduced variation of the quenching distortion.     

A Nom historical document recognition system for digital archiving

A Nom historical document recognition system is being developed for digital archiving that uses image binarization, character segmentation, and character recognition. It incorporates two versions of off-line character recognition: one for automatic recognition of scanned and segmented character patterns (7660 categories) and the other for user handwritten input (32,695 categories). This separation is used since including less frequently appearing categories in automatic recognition increases the misrecognition rate without reliable statistics on the Nom language. Moreover, a user must be able to check the results and identify the correct categories from an extended set of categories, and a user can input characters by hand. Both versions use the same recognition method, but they are trained using different sets of training patterns. Recursive X–Y cut and Voronoi diagrams are used for segmentation; k–d tree and generalized learning vector quantization are used for coarse classification; and the modified quadratic discriminant function is used for fine classification. The system provides an interface through which a user can check the results, change binarization methods, rectify segmentation, and input correct character categories by hand. Evaluation done using a limited number of Nom historical documents after providing ground truths for them showed that the two stages of recognition along with user checking and correction improved the recognition results significantly.     

Fast, externally triggered, digital phase controller for an optical lattice

We present a method to control the phase of an optical lattice according to an external trigger signal. The method has a latency of less than 30 μs. Two phase locked digital synthesizers provide the driving signal for two acousto-optic modulators which control the frequency and phase of the counter-propagating beams which form a standing wave (optical lattice). A micro-controller with an external interrupt function is connected to the desired external signal, and updates the phase register of one of the synthesizers when the external signal changes. The standing wave (period λ/2 = 390 nm) can be moved by units of 49 nm with a mean jitter of 28 nm. The phase change is well known due to the digital nature of the synthesizer, and does not need calibration. The uses of the scheme include coherent control of atomic matter-wave dynamics.     

A content search system considering the activity and context of a mobile user

People routinely carry mobile devices in their daily lives and obtain a variety of information from the Internet in many different situations. In searching for information (content) with a mobile device, a user’s activity (e.g., moving or stationary) and context (e.g., commuting in the morning or going downtown in the evening) often change, and such changes can affect the user’s degree of concentration on his or her mobile device’s display and information needs. Therefore, a search system should provide the user with an amount of information suitable for the current activity and a type of information suitable for the current context. In this study, we present the design and implementation of a content search system that considers a mobile user’s activity and context, with the goal of reducing the user’s operation load for content search. The proposed system switches between two kinds of content search systems according to the user’s activity: the location-based content search system is activated when the user is stationary (e.g., standing and sitting), while a menu-based content search system is activated when the user is moving (e.g., walking). Both systems present information according to user context. The location-based system presents detailed information via menus and a map according to location-based categories. The menu-based system presents only a few options to enable users to get content easily. Through user experiments, we confirmed that participants could get desired information more easily with this system than with a commercial search system.     

Three-dimensional medical image recognition of cancer of the liver by a revised radial basis function (RBF) neural network algorithm

In this study, we propose a revised radial basis function (RBF) neural network algorithm and apply this algorithm to computer-aided diagnosis (CAD) of the liver. First, the revised RBF neural network algorithm is applied to recognition of the liver regions, and the recognition results are compared with those obtained using the conventional RBF neural network and the conventional multilayered neural network trained using the back-propagation algorithm. It is shown that the revised RBF neural network is accurate, and is a useful method because the parameters are automatically determined. Then, the revised RBF neural network is applied to CAD of the liver cancer called hepatocellular carcinoma (HCC).     

Cooling of3He-4He dilute solution down to 97 μK. Thermal boundary resistance between dilute solution and metal powder

We have cooled a³He-⁴He dilute solution down to 97 K, which is the lowest temperature ever been achieved in a dilute mixture. However, there is no sign of the superfluid transition of³He quasiparticles in the solution. In the sub-millikelvin region, we have measured the thermal boundary resistance between the solutions and sintered metal powder as a function of temperature T. We find that the thermal boundary resistence is proportional to T^–2 below 1 mK and that the resistance shows a strong dependence on magnetic fields below 0.1 T. These results suggest that the magnetic coupling is dominant in this temperature region. We have also estimated the heat leak into the dilute solution. It is found that the heat leak is proportional to the power of one third of inverse time, and the main source of the heat leak is ascribed to the viscous movement of³He quasiparticles.     

High-temperature strength and thermal stability of a unidirectionally solidified Al2O3/YAG eutectic composite

A unidirectional solidification method was investigated to manufacture Al2O3/YAG eutectic composites with high-temperature resistance that would make them usable at very high temperatures. We were successful in manufacturing a single-crystal Al2O3/single-crystal YAG eutectic composite with a dimension of 40 mm in diameter and 70 mm in length containing no colonies or pores. This composite also displayed excellent high-temperature strength characteristics. The flexural strength was in the range 350400 MPa from room temperature up to 2073 K (just below its melting point of about 2100 K) with no apparent temperature dependence. During tensile tests above 1923 K, the eutectic composite showed evidence of plastic deformation occurring by dislocation motion, and a yield phenomenon similar to many metals was observed. In addition, the microstructure of the composite was extremely stable: after 1000 h of heat treatment at 1973 K in an air atmosphere there was no growth. The above superior high-temperature characteristics are caused by such factors as the eutectic composite having a single-crystal Al2O3/single-crystal YAG structure, the formation of a compatible interface with no amorphous phase and thermal stability, and the combined effect of a YAG phase with superior high-temperature characteristics. © 1998 Chapman & Hall     

A design of high optical efficiency wedge type light guide plate adopting twin inclined cylindrical surface

We propose wedge type light guide plate (LGP) adopting twin inclined cylindrical surfaces (TICS) at the incident part of a LGP. It has higher optical efficiency than conventional wedge type LGP. In dimension of LGP which the thickness of incident part is 1.5 mm and that of luminance part is 0.7 mm, the optical efficiency of wedge type LGP adopting TICS is expected to be 96% in comparison with a normal flat LGP. In addition, there is an advantage to reduce the non‐uniformity of vicinity of light emitted diodes (LEDs) by TICS reflecting light laterally. However, it is necessary that the LED centers are aligned with the intersections of TICS. The misalignment of LED causes non‐uniformity of optical profile that is slightly larger than a normal LGP.