Recommended NDT Practice and its Model-based Investigation for Eddy Current Inspection of Aerospace Structures

This paper describes a model-based investigation of inspection standards being developed as a recommended practice for eddy current (EC) NDT of aerospace structures for surface cracks. Compared to experimental investigations that can be laborious and expensive, model-based approach provides cost-effective and quantitative verifications of the recommended practice that covers wide ranges of materials, probes, instruments, frequencies, and test conditions. Probe signals for a number of specified standard notches are predicted and the expected amplitudes and phase-angle ranges are determined for various test conditions, in order to examine the influence of material electrical conductivity, frequency, and probe types. For a few selected situations, the model predictions are validated against experimental data. This study verifies the adequacies of the recommended specifications, especially of the reference notch selections and their response amplitudes for various test conditions, as well as confirming the suitability of using vertical amplitude alone for all the test situations. The influence of probe cable and the issue of three-point calibration are also discussed specifically in this investigation.     

Non‐linear finite element analysis of mechanical electrochemical phenomena in hydrated soft tissues based on triphasic theory

The well‐accepted triphasic theory for modelling the mechano‐electrochemical phenomena of charged hydrated soft tissue has been limited to infinitesimal deformation problems due to the difficulty of defining a common reference configuration for the whole tissue. In this paper, an imaginary reference configuration for soft tissue under large deformation is established based on the reference configuration of a solid matrix and a Piola transformation of the relative velocities of the fluid and ionic phases. A non‐linear finite element analysis formulation is proposed by applying a weighted residual method to the reformulated governing equations of triphasic theory reformulated in the imaginary reference configuration, with the displacement of the solid, fluid flows, ionic molar flows, hydrostatic pressure, and electrical potential as the unknown variables. After verifying the proposed finite‐element formulation by comparing the results of a linear‐confined compression problem with those obtained by the finite difference method, the numerical analysis of a three‐dimensional free‐swelling problem of articular cartilage with large deformation, and a strong non‐linearity in the material properties is carried out to reproduce the curling behaviour of articular cartilage strips in vitro when submerged in solution baths of various concentrations. The results obtained by finite element analysis are in agreement with those measured experimentally. Copyright © 2005 John Wiley & Sons, Ltd.     

Using selective precipitant for uranyl ions — Fundamental studies for evaluating the precipitant performance

We have developed a simple reprocessing process for spent FBR fuels using N-cyclohexyl-2-pyrrolidone (NCP) which has selective precipitation ability for UO₂²⁺ ions. It was confirmed that NCP has sufficient precipitation ability for UO₂²⁺ ions, decontamination capability (separation of UO₂²⁺ from simulated fission products), and resistance to γ-ray radiation in nitric acid solutions. These findings indicate that NCP is applicable to our reprocessing process. We have also evaluated performances of other precipitants such as N-n-propyl-2-pyrrolidone (NProP), N-n-butyl-2-pyrrolidone (NBP), and N-n-butyl-2-pyridone (NBPyr). It was found that higher decontamination factors (DFs) are obtained by using NProP and NBP. This can be interpreted that the hydrophobicity of NProP and NBP is lower than that of NCP. Furthermore, we have obtained an experimental result that the resistance of NBPyr to γ-ray radiation is superior to that of NCP.     

A novel chromatographic separation technique using tertiary pyridine resin for the partitioning of trivalent actinides and lanthanides

A novel chromatographic separation technique using a tertiary pyridine type resin has been applied to the partitioning of the trivalent actinides (An) and lanthanides (Ln) and several successful results have been shown. In an alcoholic hydrochloric acid system, the trivalent An were clearly separated from the Ln, while no such group separation was achieved in an alcoholic nitric acid system. On the other hand, the nitric acid system was more effective for the intragroup (i.e. individual) separation of the trivalent An and the Ln than the hydrochloric acid system. On the basis of these results, a novel concept for the partitioning of the trivalent An and Ln using the present separation technique and its flowchart have been proposed with its advantages and disadvantages.     

Plan for first phase of safety demonstration tests of the High Temperature Engineering Test Reactor (HTTR)

Safety demonstration tests using the High Temperature Engineering Test Reactor (HTTR) will be conducted for the purpose of demonstrating inherent safety features of High Temperature Gas-cooled Reactors (HTGRs) as well as providing the core and plant transient data for validation of HTGR safety analysis codes. The first phase safety demonstration test items include the reactivity insertion test and the coolant flow reduction test. In the reactivity insertion test, which is the control rod withdrawal test, one pair out of 16 pairs of control rods is withdrawn, simulating a reactivity insertion event. The coolant flow reduction test consists of the partial loss of coolant flow test and the gas circulators trip test. In the partial loss of coolant flow test, primary coolant flow rate is slightly reduced by control system. In the gas circulators trip test one and two out of three gas circulators are run down, simulating coolant flow reduction events. The gas circulators trip tests, in which position of control rods are kept unchanged, are simulation tests of anticipated transients without scram (ATWS).     

Variations of stress intensity factor of a semi-elliptical surface crack subjected to mixed mode loading

Maximum stress intensity factors of a surface crack usually appear at the deepest point of the crack, or a certain point along crack front near the free surface depending on the aspect ratio of the crack. However, generally it has been difficult to obtain smooth distributions of stress intensity factors along the crack front accurately due to the effect of corner point singularity. It is known that the stress singularity at a corner point where the front of 3 D cracks intersect free surface is depend on Poisson's ratio and different from the one of ordinary crack. In this paper, a singular integral equation method is applied to calculate the stress intensity factor along crack front of a 3-D semi-elliptical surface crack in a semi-infinite body under mixed mode loading. The body force method is used to formulate the problem as a system of singular integral equations with singularities of the form r ⁻³ using the stress field induced by a force doublet in a semi-infinite body as fundamental solution. In the numerical calculation, unknown body force densities are approximated by using fundamental density functions and polynomials. The results show that the present method yields smooth variations of mixed modes stress intensity factors along the crack front accurately. Distributions of stress intensity factors are indicated in tables and figures with varying the elliptical shape and Poisson's ratio.     

A single solution method for converting 2D assembly drawings to 3D part drawings

Although solid models play a central role in modern CAD systems, 2D CAD systems are still commonly used for designing products without complex curved faces. Therefore, an important task is to convert 2D drawings to solid models, and this is usually carried out manually even in present CAD systems. Many methods have been proposed to automatically convert orthographic part drawings of solid objects to solid models. Unfortunately, products are usually drawn as 2D assembly drawings, and therefore, these methods cannot be applied. A further problem is the difficult and time-consuming task of decomposing 2D assembly drawings into 2D part drawings. In previous work, the authors proposed a method to automatically decompose 2D assembly drawings into 3D part drawings, from which 2D part drawings can be easily generated. However, one problem with the proposed method was that the number of solutions could easily explode if the 2D assembly drawings became complex. Building on this work, here we describe a new method to automatically convert 2D assembly drawings to 3D part drawings, generating a unique solution for designers regardless of the complexity of the original 2D assembly drawings. The only requirement for the approach is that the assembly drawings consist of standard parts such as bars and plates. In 2D assembly drawings, the dimensions, part numbers and parts lists are usually drawn, and the proposed method utilizes these to obtain a unique solution.     

Clinically applicable bulk isolation of blood CD34+ cells for autografting in children

The quality of population-based cancer registries has been measured by the indices of the proportion of total incident cases (DCO%) registered by death certificate only (DCO), and the ratio of incidence to mortality (I/D ratio). Recently it has been recommended that DCO% should be used as an index for the reliability of diagnosing cancers and that the proportion of cases first notified via death certificate (DCN, DCN%) be used as an index for the completeness of registration. Parkin introduced a method to estimate the registration rate, the estimated proportion of the "true incidence" that are registered in population-based registries. We recommend a modified method for estimating the registration rate for cancer registries where DCN% is relatively high, as it is in Japan, as Parkin's method may overestimate the registration rate. The method is as follows: the registration rate = (1-DCN% x 1/D ratio)/(1-DCN%). The registration rates at the Osaka Cancer Registry between 1966 and 1992 were estimated using our method. During this period, the yearly registration rate was 74.6-78.4% for males and 69.1-73.3% for females. When the cancer cases were looked at according to site, the yearly registration rate was 74.2-81.6% for stomach cancer, 81.2-89.3% for lung cancer, and 71.3-76.9% for uterine cancer. These results show that the registration rate is high for cancers that have an unfavorable prognosis and low for cancers that have a favorable prognosis. We recommend that all cancer registries in Japan calculate the completeness of registration by utilizing DCN defined as the sum of DCO plus cases not reported as cancer but with supportive clinical information of such obtained through survey of the registry for DCN.     

Determination of Ring-OSF Position in Czochralski Silicon Single Crystals by Numerical Analysis of Distribution of Grown-in Defects

A numerical analysis technique that incorporates Voronkov's model were examined and used to estimate the distribution of defects during crystal growth. By comparisons of the distribution of the density of LSTD and the position of R-OSF in non-nitrogen-doped (non-N-doped) and nitrogen-doped (N-doped) silicon crystals, it is found that the results of the numerical analyses agree with practically evaluated data. The observations suggest that the R-OSF nucleus is a VO2 complex that is formed by bonds between oxygen atoms and residual vacancies consumed during the formation of void defects. This suggests that Voronkov's model can be used to accurately predict the generation and growth of defects in silicon crystals. This numerical analysis technique was also found to be an effective method of estimating the distribution of defects in silicon crystals during crystal growth.     

The Impact of Duodenal Mucosal Vulnerability in the Development of Epigastric Pain Syndrome in Functional Dyspepsia

An unidentified cause of functional dyspepsia (FD) is closely associated with medication resistance. Acid suppression is a traditional and preferential method for the treatment of FD, but the efficacy of this treatment varies between epigastric pain syndrome (EPS) and postprandial syndrome (PDS): it is efficient in the former but not much in the latter. Transepithelial electrical resistance (TEER), a surrogate of mucosal barrier function, was measured under pH 3 and pH 5 acidic conditions using duodenal biopsy specimens obtained from the patients with EPS and PDS and asymptomatic healthy controls. The infiltration of inflammatory cells to the duodenal mucosa was accessed by immunohistochemical analysis. The duodenal mucosal TEER in EPS patients was decreased by exposure to the acidic solution compared to that of the controls and the PDS patients. The decrease in TEER of the EPS patients was observed even under pH 5 weak acidic condition and was correlated to degree of the epigastric pain. Moreover, the duodenal mucosa of EPS patients presented an increase in mast cells and plasma cells that expressed Ig-E. Duodenal mucosal vulnerability to acid is likely to develop EPS.