An analysis of shielding against DC magnetic fields generated by electric railways. Evaluation of effective permeability of fine structure

This paper describes an effective analysis of magnetic shielding based on homogenization. The analyses become time‐consuming if the problems include the magnetic substances having fine structure. The homogenization of the structure makes it possible to analyze effectively the magnetic fields. The authors introduce a method to estimate the effective permeability of the homogenized substance. This method can be applied to any periodic structure made of magnetic substance. The magnetic shielding effects by the structures against direct‐current (DC) fields generated by electric railways are analyzed by using the present method. As a result, it is found that the overhead way and the protective fence near the railway work as a magnetic shield, whose effects can be improved by appropriate arrangement of those constructions. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 160(4): 7–15, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20310     

Verification of Iron Loss Calculation Method Using a High‐Precision Iron Loss Analyzer

Because of the improved performance of power devices, the volume of the ac filter inductors used in high‐frequency PWM inverters has been reduced. However, the temperature rise in the filter inductor due to this miniaturization has become more pronounced. Therefore, we have proposed an iron loss calculation method for the ac filter inductor. However, the accuracy of the value calculated via the loss map method cannot be verified, because the iron loss arising during each switching period cannot be measured with conventional power measuring instruments. In order to resolve this problem, we developed an inductor loss analyzer (ILA), which allows precise measurement of the iron loss in the inductor during each switching period. The accuracy of the calculation of iron loss in the filter inductor by the loss map method was verified with the ILA. We found that the value calculated by the loss map method differed slightly from the value measured with the ILA. However, these differences can be reduced if we take into account the accurate flux density calculation and the effect of the duty ratio of PWM pulses on the loss. Finally, we verified that the loss map method can provide accurate iron loss calculations.     

Iron Loss Calculation of AC Filter Inductor for Three‐Phase PWM Inverters

In recent years, remarkable advancement of new power semiconductor devices, such as SiC and GaN, enables the increase of switching frequency of power converters, and hence the volume of passive components, such as ac filters and transformers, can be reduced. However, temperature rise caused by the inductor loss is increasing, and hence iron loss evaluation of the inductor is one of the most important issues to realize high power density converters. Conventionally, an improved generalized Steinmetz equation (iGSE) has proposed in order to calculate the iron loss under a pulse voltage magnetizing condition. However, accurate iron loss calculation of the ac filter inductor used in a PWM inverter cannot be realized. The authors have proposed two methods of iron loss evaluation of ac filter inductors. The first one is a loss map method which can calculate the iron loss without using a real PWM inverter. Another one is an ILA (Inductor Loss Analyzer) which can measure the iron loss in every switching period in a real PWM inverter. In this paper, comparisons of the iron loss between the ILA and the loss map method on both the single‐phase and three‐phase inverters are studied. It is found that iron loss of the ac filter inductor in the three‐phase PWM inverter which is calculated by the loss map method cause a large error on a specific condition. In order to prevent the calculation error, the authors proposed a revised loss map method and proved the effectiveness of the method.     

Comparisons of optimal release policies for software systems

In a software product management, it is an important problem to determine the optimal release timing which minimizes the total expected cost incurred in both testing and operation phases. In this paper, we compare the performance between two kinds of software release methods, which are referred to as the T-policy and the N-policy. Based on the existing software reliability growth models, we formulate the expected cost functions and derive analytically the optimal policies under these control methods. Also, we derive a criterion for which control methods should be adopted. Finally, in numerical examples, we calculate the optimal release policies for several cost parameters.     

Electrokinetic microslit experiments to analyse the charge formation at solid/liquid interfaces

Electrokinetic effects play an important role in microfluidics and nanofluidics. Although the related phenomena are often utilized to control fluid flow and sample transport in lab-on-a-chip devices, their dependency on the surface charges on the channel walls often remain enigmatic. This is mainly due to the lack of adequate experimental methods to analyse the electrical charging of solid/liquid interfaces of interest. To address this need, an experimental set-up—designated as microslit electrokinetic set-up (MES)—has been recently developed and applied for the investigation of charge formation processes at planar solid/liquid interfaces. The device permits to perform streaming potential and streaming current measurements across a rectangular streaming channel formed by two parallel sample carriers (20×10×3 mm³) at variable distance allowing for the determination of the surface conductivity. Utilizing the MES, charge characteristics can be determined for a wide variety of materials prepared as thin films on top of planar glass substrates. Streaming potential and streaming current data permit to investigate the mechanisms of charge formation while surface conductivity data provide information about mobile charge carriers located in different zones at the interface. The applicability of this advanced experimental approach is demonstrated with examples obtained for surfaces with different levels of complexity:

1. Preferential ion adsorption onto unpolar fluoropolymer (Teflon^® AF) films was characterized in simple electrolyte solutions; the results were quantitatively evaluated with respect to interfacial ion concentrations.
2. Interrelation of charge density and conformation of grafted poly(L-glutamic acid layers) were unravelled from the determination of pH-depended variations of surface conductivity and layer thickness.
3. The impact of spatial confinements of surface functional groups on their acid–base behaviour was studied with self-assembled monomolecular films of alkanethiols chemisorbed on gold.
4. Charging of and ion mobility within poly(acrylic acid) (PAA) brushes prepared by a Langmuir–Blodgett technique were analysed at varied pH and ionic strength.
5. Interfacial modes of adsorbed proteins were distinguished at two polymer surfaces with varied hydrophobicity/charge density.

     

On a Two-Unit Standby-Redundant System with Imperfect Switchover

A standby-redundant repairable system having only two units and an imperfect switchover is considered. The Lapace-Stieltjes transform of the distribution of the time to first system faflure (TFSF) and the mean TFSF are derived. Numerical comparisons of the mean TFSF with both perfect and imperfect switching are made. All time distributions, except repair of the main units, are exponential.     

Reliability Analysis of a Two-Unit Standby-Redundant System with Preventive Maintenance

We consider a standby-redundant model of two units, where we assume that one unit is operative and the other unit is in standby at time t = 0. If the operative unit fails, a unit in standby is put into preventive maintenance policy of the operative unit to maintain our the preventive maintenance policy of the operative unit to maintain our system with high reliability. Our concern for the system is the time to the first system-down. The Laplace-Stieltjes transform of the time distribution to the first system-down and the mean time to the first system-down are derived by applying the relationship between Markov renewal processes and signal flow graph. Further, the behavior after the system-down is investigated by using the results of Markov renewal processes. Finally, numerical examples are presented for the k-Erlang failure time distributions. The optimal preventive maintenance time is discussed.     

Electrical conductivity and thermoelectric power in irradiated UO2 + x

Two kinds of UO_{2 + x}, the O/U ratios of which were 2.002 and 2.004, respectively, were irradiated to a dose range between 1.14 × 10¹⁴ and 1.90 × 10¹⁸ fissions/cm³, and electrical conductivity changes were measured. A steep decrease in conductivity was observed with increasing dose up to 1 × 10¹⁵ fissions/cm³, a gradual increase followed between 1 × 10¹⁵ and 1 × 10¹⁸ fissions/cm³ and above this dose the conductivity abruptly increased. Thermoelectric power measurements were also carried out for the specimens irradiated in the dose range up to 1.90 × 10¹⁸ fissions/cm³. It might be suggested that p-type conduction contributes to the electrical conductivity in irradiated specimens up to 1.90 × 10¹⁸ fissions/cm³.     

Detection of Helicobacter pylori in fecal samples of gnotobiotic mice infected with H. pylori by an immunomagnetic-bead separation technique

By an immunomagnetic-bead (IMB) separation technique, isolation of Helicobacter pylori from gastrointestinal and fecal samples of gnotobiotic mice infected with the microorganism was tried. The isolation rate of H. pylori from stomach samples after IMB separation was not higher than that of direct culture of the samples. After IMB separation of feces, H. pylori was detectable by PCR, although H. pylori was not culturable.