Photocatalytic oxidation of nitrogen oxide over titania–zeolite composite catalyst to remove nitrogen oxides in the atmosphere

The photooxidation of NO with oxygen over Hycom TiO₂ and zeolite (A and Y form zeolite: TiO₂-AZ and TiO₂-YZ) composite catalysts was studied to remove NO_x in the atmosphere. The photocatalytic oxidation activity of the titania in the composite catalyst in a proportion of AZ:TiO₂=3:7 is about three times larger than that in the bare titania. The adsorption behaviors of NO and NO₂ for the bare titania sample obey Langmuir adsorption equations of NO and NO₂, respectively. In the titania–zeolite composite catalysts, the adsorption data indicate the increase in the amount of NO adsorption on the TiO₂ phase and the decrease in the amount of NO₂ adsorption, compared with the bare titania. The acceleration of NO photooxidation rate, resulting from the increase in the amount of NO adsorbed and the decrease in the amount of NO₂ adsorbed, thus occurs on the TiO₂ phase. IR spectra, when irradiating the catalysts with UV, showed the immediate formation of nitrate and NO₂ species on the catalyst. The results lead to the conclusion that the zeolites promote the photocatalytic oxidation of NO over the titania.     

Quick determination of dielectric anisotropy of paper sheets by means of microwaves

This paper deals with a new type of method for determining the complex dielectric constant at microwave frequencies in about 30 s. This method determines the dielectric anisotropy and refractive index for optically opaque paper sheets. The dielectric anisotropy ascribable to the local motions of cellulose molecules is supported by electron microscopic observations and mechanical anisotropy. The angular dependence of the complex dielectric constant gives the degree of molecular orientation and the distribution of cellulose molecules in paper sheets. The direction of the average orientation of molecular chains can be inferred from the anisotropic data. It is also suggested that the cellulose molecules should be oriented on an average in the direction of long axis of pulp fibers. The accumulation of data for complex dielectric constant and refractive index at microwave frequencies gives an important chart for manufacturing the functional paper corresponding to needs.     

Analytical study of effects of finger-growth velocity on reaction characteristics of reactive miscible viscous fingering by using a convection-diffusion-reaction model

Reactive miscible viscous fingering occurs when a reactive and miscible less-viscous liquid displaces a more-viscous liquid. Effects of bulk finger-growth velocity on reaction characteristics of miscible viscous fingering with a chemical reaction were studied analytically by using a convection-diffusion-reaction model. The model assumes the existence of a distinct interface between both liquids, assumes the existence of a two-dimensional, steady, stagnated flow field in the less-viscous liquid, and assumes an infinite chemical reaction rate. The model was then used to determine the reaction characteristics, such as the location of the reaction surface and the profile of the product, as functions of the velocity and initial reactant concentrations. The results reveal that the effects of the velocity on the reaction characteristics can be divided into low-, intermediate-, and high-velocity regions. In the low-velocity region, the reaction characteristics strongly depend on the reactant concentrations. In the intermediate-velocity region, the dependence of the reaction characteristics on the reactant concentrations decreases with increasing velocity. In the high-velocity region, the reaction characteristics are nearly independent of the reactant concentrations. Experiments confirm the existence of these three velocity regions predicted by the model.     

Gain scheduling control of variable speed WTG under widely varying turbulence loading

Probabilistic paradigms for wind turbine controller design have been gaining attention. Motivation derives from the need to replace outdated empirical-based designs with more physically relevant models. This paper proposes an adaptive controller in the form of a linear quadratic Gaussian (LQG) for control of a stall-regulated, variable speed wind turbine generator (WTG). In the control scheme, the strategy is twofold: maximization of energy captured from the wind and minimization of the damage caused by mechanical fatigue due to variation of torque peaks generated by wind gusts. Estimated aerodynamic torque and rotational speed are used to determine the most favorable control strategy to stabilize the plant at all operating points (OPs). The performance of the proposed controller is compared with the classical proportional-integral-derivative (PID) controller. The LQG is seen to be significantly more efficient especially in the alleviation of high aerodynamic torque variations and hence mechanical stresses on the plant drive train. Simulation results validate the effectiveness of the proposed method.     

Effects of alkali or acid treatment on the isomerization of amino acids

The effect of alkali treatment on the isomerization of amino acids was investigated. The 100×D/(D+L) values of amino acids from peptide increased with increase in the number of constituent amino acid residues. Furthermore, the N-terminal amino acid of a dipeptide was isomerized to a greater extent than the C-terminal residue.     

Electrical properties of Zn+-doped (AlGa)As prepared by molecular beam epitaxy and its use in shallow junction solar cells

In conventional molecular beam epitaxy the p-type dopant zinc cannot be incorporated into GaAs because of its high vapour pressure. In the present work, zinc atoms were ionized to increase the sticking coefficient and zinc-doped p-type (AlGa)As was prepared by molecular beam epitaxy for the first time. The p-type layer with hole concentrations of $\text{10}{}^{16}\text{?10}{}^{19}\text{cm}{}^{\mathrm{?3}}$ is readily produced by this technique. Measurements of the Hall effect, the impurity distribution profile and the photoluminescence showed that Zn⁺-doped GaAs and (AlGa)As layers have a good quality comparable with that of layers doped with other impurities such as magnesium and beryllium. The epitaxial p-GaAs thin films were used to prepare shallow junction solar cells. The electrical characteristics showed a reduction of the surface recombination effect, and an energy conversion efficiency of up to 12.6% was obtained.     

Reliability of ultrasonographic measurements of bovine sole structures in relation to sole horn thickness,measured by computed tomography,and sole horn hardness

The goal of the present study was to determine the effect of sole horn thickness (SHT) and sole horn hardness (SHD) on ultrasonographic visualization of sole structures in the inner and outer claws of 150 Holstein-Friesian cows, and to evaluate different ultrasound frequencies for this purpose. Ultrasonographic views of the sole structure were considered complete when 3 echogenic lines, representing the ventral surface of the sole horn, the borders of the sole horn and soft-tissue layer, and the ventral surface of the distal phalanx, were seen. The proportion of complete ultrasonographic views of the sole structures, designated as the ultrasonographic visualization proportion (UVP), and the measurement errors of SHT were evaluated by comparing images from computed tomography (CT) and ultrasonography. The latter images were generated using 3 different probes, frequencies of 6.5 and 5.0 MHz, and 2 different ultrasound machines (#1 and #2) to assess the apex, middle, and heel regions of the claws. The UVP were 60.8 to 77.9% for the 6.5-MHz probe in ultrasound machine #1 (probe A), which were lower than those (>90%) for both the 5.0-MHz probe in ultrasound machine #1 (probe B) and the 5.0-MHz probe in ultrasound machine #2 (probe C). The UVP was significantly lower in claws with an SHD ≥50 units than in claws with an SHD <40 or 40 to <50 units (UVP: 77.1% compared with 93.7 and 91.4%, respectively) when measured with probe B. In claws with an SHT <10 mm, the UVP was significantly lower when SHD was ≥50 units compared with <40 or 40 to >50 units; the values were 69.0% versus 91.3 and 85.9%, respectively, for probe A, and 89.7% versus 100 and 100%, respectively, for probe B. When SHT were measured by either probes A or B in ultrasound machine #1, the proportions of claws in which ultrasonographic values were within a ±1 mm range compared with the values obtained by CT were 84.9 to 91.3% for CT-determined SHT <5 mm, 66.7 to 71.9% for CT-determined SHT 5 to <7 mm, 28.9 to 51.2% for CT-determined SHT 7 to <10 mm, and 6.2 to 19.7% for CT-determined SHT ≥10 mm. The data indicated that increased SHT was associated with a decrease in ultrasonographic measurement accuracy. In claws with an SHT <5 mm, the high proportion of ultrasonographic values that were accurate within a ±1 mm range suggests that this imaging modality would be useful in cows with thin soles.     

A novel flavin adenine dinucleotide (FAD) containing d-lactate dehydrogenase from the thermoacidophilic crenarchaeota Sulfolobus tokodaii strain 7: purification, characterization and expression in Escherichia coli

Dye-linked D-lactate dehydrogenase activity was found in the crude extract of a continental thermoacidophilic crenarchaeota, Sulfolobus tokodaii strain 7, and was purified 375-fold through four sequential chromatography steps. With a molecular mass of about 93 kDa, this enzyme was a homodimer comprised of identical subunits with molecular masses of about 48 kDa. The enzyme retained its full activity after incubation at 80 degrees C for 10 min and after incubation at pHs ranging from 6.5 to 10.0 for 30 min at 50 degrees C. The preferred substrate for this enzyme was D-lactate, with 2,6-dichloroindophenol serving as the electron acceptor. Using high-performance liquid chromatography (HPLC), the enzyme's prosthetic group was determined to be flavin adenine dinucleotide (FAD). Its N-terminal amino acid sequence was MLEGIEYSQGEEREDFVGFKIKPKI. Using that sequence and previously reported genome information, the gene encoding the enzyme (ST0649) was identified. It was subsequently cloned and expressed in Escherichia coli and found to encode a polypeptide of 440 amino acids with a calculated molecular weight of 49,715. The amino acid sequence of this dye-linked D-lactate dehydrogenase showed higher homology (39% identity) with that of a glycolate oxidase subunit homologue from Archaeoglobus fulgidus, but less similarity (32% identity) to D-lactate dehydrogenase from A. fulgidus. Taken together, our findings indicate that the dye-linked D-lactate dehydrogenase from S. tokodaii is a novel type of FAD containing D-lactate dehydrogenase.