Effect of cell structure on oil absorption of highly oil absorptive polyurethane foam for on-site use

This article reports the effect of cell structure on oil absorption of highly oil-absorptive polyurethane foam (ON-PUR), which is suitable for on-site foaming. We have developed ON-PUR as an oil absorbing polyurethane foam using a very reactive recipe. ON-PUR was synthesized by mixing polyol, water, additives, and polymeric diphenylmethane diisocyanate (P-MDI) using a high-pressure foaming machine. Density, airflow, oil absorption of this foam, and cell structure by microscopy were measured. From these results, it was found that the airflow of this foam increased by crushing, and the oil absorption of this foam increased sharply in a narrow airflow range (from 0.1 to 0.8 scfm). This increase is estimated to be due to the decrease of closed cell structures by crushing treatment. Furthermore, we constituted on-site foaming system in bench scale, which was expected to be applicable to on-site preparation of ON-PUR. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65: 179–186, 1997     

Zeta potential of alumina powders with different crystalline phases in simulated body fluids

The zeta potential of alumina (Al₂O₃) powder with different crystalline phases, prepared by heat treatment of boehmite, was measured in simulated body fluids in order to discuss the mechanism on in vivo formation of a calcium and phosphorus (CaP)-rich layer on bone cement containing δ-Al₂O₃-based bead powder. γ, δ, and θ-Al₂O₃ powders were obtained by heat treatment of boehmite powder at 600 °C, 900 °C, and 1025 °C, respectively. It was found that δ-Al₂O₃ gave a negative zeta potential in an acidic simulated body fluid, whereas γ-Al₂O₃ and θ-Al₂O₃ gave a positive potentials. During the bone fracture healing process, acidic conditions are maintained at the site of fracture for several days. Consequently, it is speculated that the negative surface potential of δ-Al₂O₃ in an acidic body fluid, similar to the fracture site, might be responsible for the in vivo formation of the CaP-rich layer on the overlying bone cement, given that the negatively charged surface of δ-Al₂O₃ would attract calcium ions from the surrounding body fluid, thereby facilitating the formation of the CaP-rich layer.     

Bifidobacterium bifidum YIT 10347 fermented milk exerts beneficial effects on gastrointestinal discomfort and symptoms in healthy adults: A double-blind,randomized, placebo-controlled study

In a preliminary open-label trial by our group, Bifidobacterium bifidum YIT 10347 (YIT10347) relieved gastric symptoms in patients with functional gastrointestinal disorders. Hence, in this study, we investigated the effects of YIT10347 on gastrointestinal symptoms in healthy adults. In this prospective double-blind, randomized, placebo-controlled trial (UMIN000024654), 100 healthy Japanese adults were randomly assigned to a YIT10347 group or placebo group and consumed 100 mL of YIT10347-fermented milk or placebo fermented milk, respectively, every day for 4 wk. Gastrointestinal symptoms were evaluated by using the modified Frequency Scale for Symptoms of Gastroesophageal Reflux Disease (m-FSSG) and Gastrointestinal Symptom Rating Scale (GSRS) as primary endpoints. Mental symptoms, quality of life, salivary stress markers, and gastric emptying were evaluated as secondary endpoints. Effectiveness and safety were analyzed in a per-protocol set (YIT10347 group, n = 39; placebo group, n = 40) and full analysis set (YIT10347 group, n = 50; placebo group, n = 50), respectively. In the m-FSSG evaluation, the YIT10347 group had a significantly higher relief rate of postprandial discomfort and greater changes in postprandial epigastric pain score from baseline than the placebo group. In the GSRS evaluation, the YIT10347 group had significantly higher relief rates of overall gastrointestinal symptoms, upper gastrointestinal symptoms, flatus, and diarrhea than the placebo group. We detected no significant differences in scores or relief rates of mental symptoms and quality of life, a salivary stress marker, or gastric emptying between the 2 groups. No severe adverse events associated with test beverage consumption were observed in either group. These findings suggest that daily consumption of YIT10347-fermented milk exerts beneficial effects on gastrointestinal discomfort and symptoms such as postprandial discomfort and epigastric pain in healthy adults.     

Direct dissimilar joining of aluminium alloys and polyamide 6 by friction lap joining*

Direct dissimilar joining of various Al alloy (A1050, A3004, A5052 and A5083) plates and a polyamide 6 plate was performed using friction lap joining (FLJ) with the Al alloy plate as a top and the polyamide 6 plate as a bottom. The effect of Mg content in Al alloys on the joining strength was investigated. TEM analysis made clear that the polyamide 6 and Al alloys were joined via oxide layer consisting of Al₂O₃ and MgO. The results of XPS analysis indicated that MgO was formed by the heating during FLJ, and the quantity of MgO was increased with increasing Mg content in Al alloys. The tensile shear strengths of A3004, A5052 and A5083 joints were saturated to about 2 kN because of the tensile fracture at the polyamide 6 plate outside the tool-passed zone, which were higher than that of the A1050 joint fractured at the joint interface. The peel strength of the joint was increased with increasing Mg content in Al alloys, and the fracture occurred both at the joint interface and at the polyamide 6 plate on the joint area. The fraction of polyamide 6 plate fracture was also increased with increasing Mg content in Al alloys.     

Experimental analysis of flow structure in contra-rotating axial flow pump designed with different rotational speed concept

As a high specific speed pump, the contra-rotating axial flow pump distinguishes itself in a rear rotor rotating in the opposite direction of the front rotor, which remarkably contributes to the energy conversion, the reduction of the pump size, better hydraulic and cavitation performances. However, with two rotors rotating reversely, the significant interaction between blade rows was observed in our prototype contra-rotating rotors, which highly affected the pump performance compared with the conventional axial flow pumps. Consequently, a new type of rear rotor was designed by the rotational speed optimization methodology with some additional considerations, aiming at better cavitation performance, the reduction of blade rows interaction and the secondary flow suppression. The new rear rotor showed a satisfactory performance at the design flow rate but an unfavorable positive slope of the head-flow rate curve in the partial flow rate range less than 40% of the design flow rate, which should be avoided for the reliability of pump-pipe systems. In the present research, to understand the internal flow field of new rear rotor and its relation to the performances at the partial flow rates, the velocity distributions at the inlets and outlets of the rotors are firstly investigated. Then, the boundary layer flows on rotor surfaces, which clearly reflect the secondary flow inside the rotors, are analyzed through the limiting streamline observations using the multi-color oil-film method. Finally, the unsteady numerical simulations are carried out to understand the complicated internal flow structures in the rotors.     

Evolution of long-period stacking ordered structures on annealing as-cast Mg85Y9Zn6 alloy ingot observed by synchrotron radiation small-angle scattering

1. Download : Download high-res image (84KB)
2. Download : Download full-size image

     

New type of pressurized cultivation method providing oxygen for piezotolerant yeast

For efficient oxygen supply to pressurized culture, we developed a method using a highly pressurized membrane reactor with an air-saturated medium circulation system. The new method increased the cell growth of aerobic yeast approximately 20 folds larger than that in the case of using a conventional method.     

Fabrication of colorless organic materials exhibiting white luminescence using normal and excited-state intramolecular proton transfer processes

Organic, white luminescent materials were fabricated using a mixture of proton-transfer and nonproton-transfer fluorophores. 2'-Methoxy and 2'-hydroxy derivatives of 2-phenylimidazo[1,2-a]pyridine (PIP) have similar UV-absorption properties; however, they exhibit mechanistically different luminescence respectively ascribable to the normal (～420 nm) and excited-state intramolecular proton transfer processes (～530 nm) in the solid state. UV-irradiation of mixed solids excites both components concurrently and results in efficient white luminescence composed of two independent emissions without involving energy transfer process. White luminescent solids are easily transformed into vapor-deposited films under mild conditions, and a colorless and transparent thin film by dissolving in PMMA.     

Colored Fluorescent Silk Made by Transgenic Silkworms

Silk is a protein fiber used to weave fabrics and as a biomaterial in medical applications. Recently, genetically modified silks have been produced from transgenic silkworms. In the present study, transgenic silkworms for the mass production of three colors of fluorescent silks, (green, red, and orange) are generated using a vector originating from the fibroin H chain gene and a classical breeding method. The suitability of the recombinant silks for making fabrics is investigated by harvesting large amounts of the cocoons, obtained from rearing over 20 thousand silkworms. The application of low temperature and a weakly alkaline solution for cooking and reeling enables the production of silk fiber without loss of color. The maximum strain tolerated and Young's modulus of the fluorescent silks are similar to those of ordinary silk, although the maximum stress value of the recombinant silk is slightly lower than that of the control. Fabrics with fluorescent color are demonstrated using the recombinant silk, with the color persisting for over two years. The results indicate that large amounts of genetically modified silk can be made by transgenic silkworms, and the silk is applicable as functional silk fiber for making fabrics and for use in medical applications.     

Apatite mineralization abilities and mechanical properties of covalently cross-linked pectin hydrogels

Natural bone has features such as high fracture toughness and bone-bonding bioactivity, and is organic–inorganic hybrid composed of collagen and apatite crystals. Therefore, apatite-polymer hybrids designed to mimic the structure of bone represent candidates for high-performance bone substitutes. In this study, we prepared pectin hydrogels through covalent cross-linking using divinylsulfone (DVS) and investigated their apatite-forming abilities of the gels in simulated body fluid (SBF) and mechanical properties by tensile test. The obtained results were interpreted in terms of surface charge of the gels and chemical reaction with SBF. The apple- and citrus-derived gels formed the apatite on their surfaces in SBF within 3 days. These gels showed tensile strength around 30 MPa.