A high-power electrostatic motor using skewed electrodes

This paper describes a new type of high-power electrostatic motor equipped with skewed electrodes. The authors have developed several types of high-power electrostatic motors. Among them, the dual excitation multiphase electrostatic drive (DEMED) has the best performance in terms of power. Its power/weight ratio is almost the same as that of the most advanced conventional electromagnetic motors. However, DEMED exhibits a large force ripple leading to such disadvantages as low controllability, high noise, and vibration. To overcome these disadvantages, the authors have proposed to apply the skew technique to DEMED and have analyzed the effects of skewing the electrodes. The analysis has shown that appropriate skewing can reduce the force ripple considerably. In this paper, we further analyze the shape of the electrodes. A new type of motor incorporating the results of the analysis is fabricated and tested. Using the new DEMED with skewed electrodes (V-DEMED), the slider motion becomes much smoother, noise and vibration are reduced, and efficiency improves, without compromising the thrust force. © 1998 Scripta Technica, Electr Eng Jpn, 125(3): 50–58, 1998     

Synthesis and in vitro biodegradation of pure octacalcium phosphate spheres

Octacalcium phosphate (OCP) is a key precursor of biological apatite in hard tissues with excellent osteoconductive and biodegradable properties for bone regeneration. OCP spherical granules are expected to be useful as drug delivery carriers, since OCP has high specific surface area. Although there have been some reports of OCP sphere preparation, methods for preparing pure OCP spheres are limited. The objective of this study is the preparation of spherical granules of pure OCP and assessment of their in vitro biodegradation in physiological conditions. We successfully prepared spherical pure OCP granules with a size of ~500 µm without any organic additives by simple immersion of α-tricalcium phosphate spherical granules in pH 5.0 acetate buffered solutions at 60°C. The granules had core-shell structure composed of OCP crystals different particle size. The spherical granules showed 20%-40% in vitro degradation in physiological conditions; however, the phase transition of OCP was not significantly observed.     

Molecular structure and gene analysis of Ce3+ -induced methanol dehydrogenase of Bradyrhizobium sp. MAFF211645

The molecular structure and nucleotide sequence of Ce(3+)-induced methanol dehydrogenase (MDH) of Bradyrhizobium sp. MAFF211645 were investigated. The addition of 30 μM Ce(3+) to 1/10 nutrient broth containing 0.5% methanol remarkably increased MDH activity. Furthermore, La(3+) increased MDH activity, but other heavier rare earth and metal elements did not have the same effect. MDH increased by Ce(3+) was purified by sequential column chromatography, and the purified MDH migrated as a single band with an apparent molecular weight of 68 kDa on SDS-PAGE. The apparent molecular weight of native MDH was estimated to be 108,000 by gel chromatography. The MDH was comprised of two identical subunits. N-terminal 23-amino acid sequence, 1-NDELHKMAQNPKDWVMPAGDYAN-23, of the purified MDH exhibited 91.3% identity to that of the MDH large subunit-like protein encoded by mxaF' of Bradyrhizobium japonicum USDA110. Nucleotide sequencing of the MDH gene of strain MAFF211645 yielded a deduced amino acid sequence comprising 601 amino acid residues, an N-terminal signal peptide, and a mature MDH comprising 578 amino acid residues with a predicted molecular mass of 62,918 Da. Further analysis of the deduced amino acid sequence of mature MDH revealed that the functional amino acids in its active site, such as two adjacent Cys residues, and bacterial quinoprotein signatures 1 and 2 were conserved. These results indicate that Ce(3+)-induced MDH encoded by mxaF' may be involved in methanol metabolism in Bradyrhizobium sp. MAFF211645.     

Bi-based electrochromic cell with mediator for white/black imaging

We studied electrochemical properties of bismuth deposit, which showed reversible color change from colorless clear to black by electrochemical reaction, toward paper-like electronic imaging device. Bismuth salt in an electrolyte solution is colorless clear, but turned to black by the electrodeposition on an electrode. Namely, bismuth ion (Bi³⁺) dissolved in the electrolyte solution (colorless clear) is electrochemically reduced on the electrode to deposit the Bi metal showing black color. The Bi deposit on the electrode is electrochemically oxidized to dissolve the deposit into the solution. These processes enable the color change between colorless clear and black. However, the stability of the switching between colorless and black state is not sufficient due to less electroactivity of bismuth deposit. To improve the switching stability of the present electrochromic cell, various mediators were employed to add into the electrolyte solution. Reversible white/black display cell has been successfully demonstrated.     

Thrombin Receptor-Activating Protein (TRAP)-Activated Akt Is Involved in the Release of Phosphorylated-HSP27 (HSPB1) from Platelets in DM Patients

It is generally known that heat shock protein 27 (HSP27) is phosphorylated through p38 mitogen-activated protein (MAP) kinase. We have previously reported that HSP27 is released from human platelets associated with collagen-induced phosphorylation. In the present study, we conducted an investigation into the effect of thrombin receptor-activating protein (TRAP) on the release of HSP27 in platelets in type 2 diabetes mellitus (DM) patients. The phosphorylated-HSP27 levels induced by TRAP were directly proportional to the aggregation of platelets. The levels of phosphorylated-HSP27 (Ser-78) were correlated with the levels of phosphorylated-p38 MAP kinase and phosphorylated-Akt in the platelets stimulated by 10 µM TRAP but not with those of phosphorylated-p44/p42 MAP kinase. The levels of HSP27 released from the TRAP (10 µM)-stimulated platelets were correlated with the levels of phosphorylated-HSP27 in the platelets. The released platelet-derived growth factor-AB (PDGF-AB) levels were in parallel with the HSP27 levels released from the platelets stimulated by 10 µM TRAP. Although the area under the curve (AUC) of small aggregates (9–25 µm) induced by 10 µM TRAP showed no significant correlation with the released HSP27 levels, AUC of medium aggregates (25–50 µm), large aggregates (50–70 µm) and light transmittance were significantly correlated with the released HSP27 levels. TRAP-induced phosphorylation of HSP27 was truly suppressed by deguelin, an inhibitor of Akt, in the platelets from a healthy subject. These results strongly suggest that TRAP-induced activation of Akt in addition to p38 MAP kinase positively regulates the release of phosphorylated-HSP27 from human platelets, which is closely related to the platelet hyper-aggregation in type 2 DM patients.     

Synthesis and helix-sense-selective polymerization of a novel phenylacetylene having a trisiloxanyl group and two hydroxyl groups and enantioselective permeability of the resulting chiral polymeric membrane: Effect of the trisiloxanyl group on the polymerization and enantioselective permeability

To develop a new phenylacetylene monomer suitable for helix-sense-selective polymerization (HSSP) we reported previously and to improve the efficiency of the HSSP and membrane performance of the resulting polymer, a novel phenylacetylene having a trisiloxanyl group (S3BDHPA) was synthesized and polymerized by using a chiral catalytic system and enantioselectivity in permeation of its membrane was examined. S3BDHPA was suitable for the HSSP and the CD absorption of poly(S3BDHPA) was stronger and more stable than that of the corresponding polymer having no siloxanyl groups. In addition, enantioselectivity in permeation of poly(S3BDHPA) was much higher than that of a polymer membrane having no siloxanyl groups. They are thought to be caused by the flexibility and hydrophobicity of the trisiloxane groups.     

Facile synthesis of five 2D surface modifiers by highly selective photocyclic aromatization and efficient enhancement of oxygen permselectivities of three polymer membranes by surface modification using a small amount of the 2D surface modifiers

A facile synthesis of novel five 2D (planar) surface modifiers having a triphenylbenzene derivatives as a 2D structure has been achieved by the highly selective photocyclic aromatization reaction. Efficient enhancement of oxygen permselectivities through the three polymer membranes has been achieved by adding a small amount (<5.0 wt%) of the 2D surface modifiers. Among the five 2D surface modifiers, a modifier compound having oligoethylene oxide groups showed the best performance for the enhancement. These improvements were thought to be caused mainly by improvement of the solution selectivity on the membrane surface where the 2D surface modifiers were accumulated. In some of the surface-modified blend membranes, their plots in the PO₂$P_{{\text{O}}_2}$-α graph were over or close to the upper boundary line by Robeson in 1991. Since all the membranes containing the 2D surface modifiers showed better permselectivities than the corresponding substrate membranes, it is very promising for the future.     

Design and synthesis of new secretory phospholipase A2 inhibitor of a phospholipid analog

All stereoisomers of N-acyl-4,5-disubstituted oxazolidinone phospholipid analogs were synthesized by regio and stereoselective epoxide ring opening accompanied by introduction of an amino group. The (4R,5S)-derivative showed stronger inhibitory activity toward type II phospholipase A2 than the 4-substituted oxazolidinone phospholipid analog previously reported.     

Functional group selective polymerization of (4-maleimidophenyl)oxirane as a new type of bifunctional monomer

A novel bifunctional monomer, (4-maleimidophenyl)oxirane (MAPO), with very reactive maleimido and epoxy groups, was prepared through the selective oxidation of the two carbon–carbon double bonds of N-(4-vinylphenyl)maleimide. Either of the two different polymerizable groups (vinylene of the maleimide moiety and the mono-substituted epoxide) of MAPO was able to be selectively polymerized by choosing the polymerization method. For radical polymerization, MAPO gave poly{p-[1,2-(epoxyethyl)phenyl]maleimide} (PEPM) with dense pendent epoxy groups in 76% yield without cross-linking. MAPO also gave poly(maleimidostyrene oxide) (PMSO) with dense pendent maleimido groups through cationic polymerization in 60% yield. On the other hand, anionic polymerization with an of MAPO produced only insoluble gel-like materials due to unselective polymerization of the two polymerizable groups (Scheme 1). The vinylene group of the maleimide moiety in PMSO easily reacted with the mercapto group, and the ring-opening reaction of the epoxy groups in PEPM with amino groups took place.     

On stability of a class of positive linear functional difference equations

We first give a sufficient condition for positivity of the solution semigroup of linear functional difference equations. Then, we obtain a Perron–Frobenius theorem for positive linear functional difference equations. Next, we offer a new explicit criterion for exponential stability of a wide class of positive equations. Finally, we study stability radii of positive linear functional difference equations. It is proved that complex, real and positive stability radius of positive equations under structured perturbations (or affine perturbations) coincide and can be computed by explicit formulae. Pham Huu Anh Ngoc and Toshiki Naito are supported by the Japan Society for Promotion of Science (JSPS) ID No. P 05049.