Forced vibration tests and simulation analyses of a nuclear reactor building

Forced vibration tests were carried out at the Hamaoka (BWR) Unit 4 R/B (reactor building) in Japan in April and May of 1992. Fundamental dynamic characteristics of the R/B were obtained, including its interaction with the adjacent T/B (turbine building) and the soil–structure interaction. Results for the preceding R/Bs are compared, and probable causes for fluctuations in the resonance curve around the 1st peak are discussed. Furthermore, simulation analyses of the fundamental dynamic characteristics of the soil–structure system were conducted, using a basic lumped-mass soil–structure model (lattice model), and strong correlation with the measured data was obtained. Other detailed simulation models were employed to investigate the effects of simultaneously induced vertical response and response of the adjacent turbine building on the lateral response of the reactor building.     

Studies on synthesis and permeability of special polymer membranes

Summary The permeation characteristics of polymer blend membranes from poly(vinylidene fluoride) and poly-(ethylene glycol) to aqueous polymer solution were investigated under carefully controlled conditions. The permeation characteristics were influenced significantly by the blend ratio, the temperature and time of heat treatment, which changed the structure of the resulting membranes.     

Superconducting Density of States from the Magnetic Penetration Depth of Electron-Doped Cuprates La2−x Ce x CuO4−y and Pr2−x Ce x CuO4−y

From measurements of the magnetic penetration depth, (T), from 1.6 K to T _c in films of electron-doped cuprates La_2–x Ce _x CuO_4–y and Pr_2–x Ce _x CuO_4–y we obtain the normalized density of states, N _s(E) at T=0 by using a simple model. In this framework, the flat behavior of ^–2(T) at low T implies N _s(E) is small, possibly gapped, at low energies. The upward curvature in ^–2(T) near T _c seen in overdoped films implies that superfluid comes from an anomalously small energy band within about 3k _B T _c of the Fermi surface.     

Specific heat anomaly of nonstoichiometric U4O9−y

A λ-type specific heat anomaly of U₄O_9?y, which occurs slightly above room temperature, was measured for the samples with different O/U ratios. The transition temperatures obtained from the peak of λ-type specific heat anomaly are in fairly good agreement with the data by X-ray diffraction and electrical conductivity measurements. The entropy increment for the transition was obtained to be 0.46 e.u. for UO_2.250, 0.56 e.u. for UO_2.240 and 0.70 e.u. for UO_2.228, depending on O/U ratio. On the basis of the entropy change with O/U ratio, the mechanism of the phase transition is discussed. The entropy change due to the phase transition is mainly divided into two terms: one is due to the order-disorder rearrangement of U(IV) and U(V) ions,the other is associated with the displacement of oxygens ions. The former term is estimated to be rather smaller than the entropy change calculated by the Bragg-Williams approximation, and the latter is calculated using the X-ray diffraction data with the assumption of the Willis model.     

Calculating fragment impact velocity from penetration data

Depth of penetration experiments were conducted with fragment simulating projectiles launched into Celotex^® in order to develop an equation for the strike velocity as a function of the FSP mass and the depth of penetration into Celotex^® recovery media. A powder gun launched FSPs, designed in accordance with STANAG-2920 [NATO STANAG-2920 Ballistic Test Method for Personal Armour Materials and Combat Clothing, 2nd ed., 1999.] weighing between 0.13 g and 53.78 g at striking velocities between 198 m/s and 1524 m/s. A multiple linear regression analysis was used to determine an empirical relationship for the strike velocity to the impact parameters of depth of penetration, fragment mass, and mean presented area. Sabot launched natural fragments weighing between 2.8 g and 15.8 g at striking velocities between 532 m/s and 1084 m/s were used to validate the equation.     

MR perfusion imaging by alternate slab width inversion recovery arterial spin labeling (AIRASL): a technique with higher signal-to-noise ratio at 3.0?T

Object  

To propose a new arterial spin labeling (ASL) perfusion-imaging method (alternate slab width inversion recovery ASL: AIRASL) that takes advantage of the qualities of 3.0 T.     

New approach for synthesis of activated carbon from bamboo

Unconventional pretreatment, that is, delignification and the addition of guanidine phosphate, was performed for the synthesis of activated carbon having a high specific surface area from bamboo by physical activation. The values of the specific surface area, total pore volume, and average pore size depended on the amount of added guanidine phosphate and the CO₂ activation time. The amount of the added guanidine phosphate under the optimum conditions for the highest specific surface area was much lower than that of the phosphorous acid chemical activator under conventional conditions. The N₂ adsorption isotherms of all the samples were type I, which means that micropores were dominant. The pore sizes of the samples in this study were similar to that of the physically-activated carbon. Therefore, the activation process was presumed to be essentially not chemical, but physical. The relation between the yield and the specific surface area improved with the addition of guanidine phosphate. The reason for the improvement may be the change in the reactivity of the carbon material generated during the heating process. The maximum specific surface area was ca. 2000 m² g^?1, which is a high value for a physically-activated carbon.     

Synthesis of soluble oligsiloxane-end-capped hyperbranched polyazomethine and their application to CO2/N2 separation membranes

Three soluble hyperbranched polyazomethines containing oligosiloxane end group HBP-PAZ-SiO_n were successfully synthesized. HBP-PAZ-SiO_ns were used as modifiers of ethyl cellulose (EC) and polysulfone (PS) membranes. Blend membranes, HBP-PAZ-SiO_n/EC and HBP-PAZ-SiO_n/PS were prepared by blending the THF solution of HBP-PAZ-SiO_n with ethanol solution of EC and dichloromethane solution of PS, respectively. Surprisingly, the permeabilities for CO₂ of the blend membranes were more than 15–16 times higher than those of pure EC and PS membranes without any drop of pemselectivity to N₂. This unusual improvement has been achieved by both enhancement of diffusivity for carbon dioxide and nitrogen by the oligosiloxane groups and enhancement of affinity of the amino groups with carbon dioxide at the end groups of HBP-PAZ-SiO_n.