Electron-Affinity Substituent in 2,6-Dicarbonitrile Diphenyl-1λ5-Phosphinine Towards High-Quality Organic Lasing and Electroluminescence under High Current Injection

Rationally manipulating the functional substituents plays a crucial role in tuning the luminescence and lasing properties of organic gain media. Herein, a cyanophenyl-moiety, which exhibits relatively weaker electron affinity, is connected to 2,6-dicarbonitrile diphenyl-1λ⁵-phosphinine (DCNP) via para-linking. Resultantly, the appreciated locally-excited characteristics ensuring a large oscillator strength and high radiative rate can be reserved in DCNP-4-(4-cyanophenyl) (DCNP-pCN). Interestingly, the weak charge-transfer state from the relative donor (D)/acceptor (A) interplay enables small singlet-triplet splitting (ΔE_ST ≈ 0.45 eV). Thus the triplets generated on DCNP-pCN can be efficiently scavenged by 4,4'-bis[(N-carbazole)styryl]biphenyl (BSBCz), which is used as the host with a lower-lying triplet energy level for DCNP-pCN. Moreover, benefitting from the mediation between the conjugated length extension and weak D/A interplay, the emission spectrum cannot be largely shifted, which can effectively suppress the overlap between the lasing emission of DCNP-pCN and the excited-state absorption of BSBCz, thereby avoiding detrimental singlet-triplet annihilation. Thus, high-quality distributed feedback lasings with ≈2.0 μJ cm⁻² thresholds are achieved, and the organic light-emitting diodes exhibit external quantum efficiency exceeding 2.0% without efficiency rolloff under high current injection, indicating the potential for electrical-pumping organic lasings.     

Superstructure and mechanical properties of poly(L-lactic acid) microfibers prepared by CO2 laser-thinning

Poly(L-lactic acid) (PLLA) microfibers were obtained by a carbon dioxide (CO₂) laser-thinning method. A laser-thinning apparatus used to continuously prepare microfibers was developed in our laboratory; it consisted of spools supplying and winding the fibers, a continuous-wave CO₂-laser emitter, a system supplying the fibers, and a traverse. The laser-thinning apparatus produced PLLA microfibers in the range of 100-800 m min⁻¹. The diameter of the microfibers decreased as the winding speed increased, and the birefringence increased as the winding speed increased. When microfibers, obtained through the laser irradiation (at a laser power of 8.0 W cm⁻²) of the original fiber supplied at 0.4 m min⁻¹, were wound at 800 m min⁻¹, they had a diameter of 1.37 μm and a birefringence of 24.1×10⁻³. The draw ratio calculated from the supplying and winding speeds was 2000×. The degree of crystal orientation increased with increasing the winding speed. Scanning electron microscopy showed that the microfibers obtained with the laser-thinning apparatus had smooth surfaces not roughened by laser ablation that were uniform in diameter. The PLLA microfiber, which was obtained under an optimum condition, had a Young's modulus of 5.8 GPa and tensile strength of 0.75 GPa.     

Characterization of phospholipid reverse micelles in relation to membrane processing of vegetable oils

Studies were conducted to determine the critical micelle concentration (CMC) of phospholipids in vegetable oils and the size of reverse micelles to understand their rejection phenomenon in the membrane process. The CMC values of phosphatidylcholine (PC) in triolein and phospholipids in crude soybean oil were determined to be 440 and 1020 mg/kg, respectively, by using TCNQ (7,7,8,8‐tetracyano‐quinodimethane) solubilization technique. The surface tension measurements of these samples gave similar values of CMC. From small‐angle X‐ray scattering (SAXS) analysis, the size of the PC micelles was determined to be in the range of 3.56 to 4.70 nm. The characterization of reverse micelles formed in the oil system was found useful in enhancing the understanding of the possible rejection phenomenon of phospholipids by non‐porous polymeric composite membranes used in our earlier studies on vegetable oils and in suggesting suitable types of membranes for the same.     

Development of high voltage harmonic measuring instruments for distribution systems using optical voltage sensor and current sensor

Application of an optical measuring technique was attempted in order to develop harmonic voltage and current measuring instruments for distribution systems. To develop the harmonic voltage measuring system using a Bi₁₂GeO₂₀ crystal as a sensing Pockels cell for high‐voltage distribution lines, zinc oxide elements were adopted as a voltage divider. Also, an optical current sensor system was improved on the harmonic current measuring system using an R₃Fe₅O₁₂ film as a Faraday device. In practical three‐phase distribution systems, the developed high voltage harmonic measuring devices using the optical voltage sensor and current sensor were compared with conventional harmonic analyzers for low voltage. As a result, it was confirmed that the developed high voltage harmonic measuring devices had satisfactory characteristics for practical use. © 1999 Scripta Technica, Electr Eng Jpn, 128(4): 84–93, 1999     

Photocatalytic hydrogen production from water with nonfood hydrocarbons as oxidizing sacrifice agents

To enhance photocatalytic water splitting, various oxidizing sacrifice agents (OSA) have been added to the system in order to scavenge the coproduced O₂, and, thus, to hinder the reverse reactions. In the aim of achieving carbon‐neutral photocatalytic water splitting, nonfood hydrocarbons of castor‐ and jojoba‐oils were evaluated as OSA. Moreover, various surfactants were tested as emulsifiers for W/O binary solution for promoting photocatalytic water splitting rate. Among the OSA used, the castor‐oil was found to be more suitable candidate compared to jojoba‐oil, which was attributed to its smaller carbon chain numbers of mainly 18. Without surfactants, around 20 vol %‐castor‐oil aqueous binary solution with TiO₂/Pt(0.10 wt %) provided the highest water splitting rate of about 30 mL‐H₂/(m²·h). Among tested surfactants, liquid‐detergent was the best due to its optical transparency. 40 vol %‐ or 60 vol %‐castor‐oil emulsion with a drop of liquid‐detergent resulted in a water splitting rate of 125 mL‐H₂/(m²·h), which was four times greater that the aforementioned highest value. © 2010 American Institute of Chemical Engineers AIChE J, 2011     

Evaluation and fabrication of pore‐size‐tuned silica membranes with tetraethoxydimethyl disiloxane for gas separation

Organic/inorganic hybrid silica membranes were prepared from 1,1,3,3‐tetraethoxy‐1,3‐dimethyl disiloxane (TEDMDS) by the sol‐gel technique with firing at 300–550°C in N₂. TEDMDS‐derived silica membranes showed high H₂ permeance (0.3–1.1 × 10^?6 mol m^?2 s^?1 Pa^?1) with low H₂/N₂ (～10) and high H₂/SF₆ (～1200) perm‐selectivity, confirming successful tuning of micropore sizes larger than TEOS‐derived silica membranes. TEDMDS‐derived silica membranes prepared at 550°C in N₂ increased gas permeances as well as pore sizes after air exposure at 450°C. TEDMDS had an advantage in tuning pore size by the “template” and “spacer” techniques, due to the pyrolysis of methyl groups in air and Si? O? Si bonding, respectively. For pore size evaluation of microporous membranes, normalized Knudsen‐based permeance, which was proposed based on the gas translation model and verified with permeance of zeolite membranes, reveals that pore sizes of TEDMDS membranes were successfully tuned in the range of 0.6–1.0 nm. © 2011 American Institute of Chemical Engineers AIChE J, 2011     

Self-healing capability of porous polymer film with corrosion inhibitor inserted for corrosion protection

Porous polymer films with varying pore sizes were prepared by changing the evaporation time of an organic solvent. A specimen was prepared consisting of porous polymer film containing corrosion inhibitor coated onto carbon steel. The specimens were scratched with a knife-edge, and the polarization resistance was monitored in a sodium chloride solution. An increase in polarization resistance was confirmed, and the films with larger-sized pores demonstrated a higher self-healing capability.     

Evaluating the impact of reissued instructions on data speculative processor performance

In this paper, we investigate the impact of instructions reissued due to misspeculated data dependences on processor performance. Recently, the practice of speculation in resolving data dependences has been studied as a means of extracting more instruction level parallelism. When a misspeculation occurs, it is necessary to revert the processor state to a safe point where the speculation is initiated, with an instruction reissue mechanism utilized for that purpose. The instruction reissue suffers less miss penalties than instruction squashing which handles misspeculated control flows in current generation processors, but causes redundant instruction dispatching, i.e. multiple copies of an instruction are in flight in functional units. The effectiveness of data speculation would be diminished, if reissued instructions caused serious structural hazards. Therefore, we evaluate how the instruction reissue affects processor performance using an execution-driven simulator. We find that overhead due to instruction reissue is sufficiently small so as to allow data speculation to contribute to processor performance.     

Engineering ethics education on the basis of continuous education to improve communication ability

This paper proposes an engineering ethics education method for students on the basis of continuous education to improve communication ability. First, through the process of debate, the students acquire the fundamental skills necessary to marshal their arguments, to construct rebuttals, and to summarize debates. Second, the students study the fundamental techniques to make a presentation on technical subjects related to electrical engineering. Following these classes, in lectures on engineering ethics, the students probe the causes of various accidents and consider better approaches for avoiding such accidents with each other. In most cases, the students can express good and commonsensical opinions from an ethical standpoint. However, they can hardly make judgments when the situations, such as the human relations in the above accidents, are set up in concrete terms. During the engineering ethics class, the students come to know that the human relations behind the case make ethical matters more complicated. Furthermore, they come to understand that facilitating daily communications with co‐workers and/or supervisors is very important in order to avoid such accidents. The recognition of the students is primarily the result of the continuous education during 3 years. It can be said that the engineering ethics education thus constructed increases in the students this kind of spontaneous awareness as well as their ethical qualities as engineers. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 183(3): 1–8, 2013; Published online in Wiley Online Library (wileyonlinelibrary.com). DOI 10.1002/eej.22283     

Control design of a pneumatic cylinder with distributed model of pipelines

In this paper, the control design with distributed model of pipelines is proposed to make the cylinder side be free of pressure sensors. In this research, long connected pipelines are used. The pipeline is designed as a one dimensional distributed model. The model of pipelines is based on the discretization of four equations, as state equation of air, motion equation, continuity equation, and energy equation. The distributed model estimates the pressure losses and time delay through long connected pipelines in real time. To confirm the control method with distributed model of pipelines, a simulation model of the whole system is designed. Compared simulation and experimental results, it has been found that the model represents the real system well. In the experiments, the pressure values in the cylinder chambers estimated by the distributed model in real time played as control signals. Compared with the estimated and measured pressure values in the cylinder chambers, it is found that with this distributed model, the pressure values in the cylinder chambers is precisely estimated in real time using the measured values at the control ports of the servo valve. The experimental results demonstrate that the position accuracy is almost the same with that of using the measured pressure signals in the cylinder chambers. The cylinder side is free of pressure sensors with the proposed control method.