Multimedia processors

This paper describes large-scale-integration programmable processors designed for multimedia processing such as real-time compression and decompression of audio and video as well as the generation of computer graphics. As the target of these processors is to handle audio and video in real time, the processing capability must be increased tenfold compared to that of conventional microprocessors, which were designed to handle mainly texts, figures, tables, and photographs. To clarify the advantages of a high-speed multimedia processing capability, we define these chips as multimedia processors. General-purpose microprocessors for workstations and personal computers (PCs) use special built-in hardware for multimedia processing, so the multimedia processors described include these modified general-purpose microprocessors. After reviewing the history of programmable processors, we classify multimedia processors into five categories depending on their basic architecture. The categories are reduced instruction set computer (RISC) microprocessors for workstations, complex instruction set computer microprocessors for PCs, embedded RISCs, low-power digital signal processors (DSPs), which are mainly used for mobile communications devices, and media processors that support PCs for multimedia applications. These five classes are then grouped into two: microprocessors with a multimedia instruction set and highly parallel DSPs. An architectural comparison between these two groups on the basis of Moving Picture Experts Group decoding applications is made, and the advantages and disadvantages of each class are clarified. Future processors, including “system on a chip,” and their applications are also discussed     

Spin–Lattice Relaxation of Mn Ions in Nanostructures with Semiconductor Quantum Dots

We use the combination of nonequilibrium phonon and exciton luminescence techniques to study the spin dynamics in diluted magnetic semiconductor structures with (Cd,Mn)Te and (Cd,Mn)Se quantum dots (QDs). We show that the spin–lattice relaxation (SLR) of Mn ions in these structures differs strongly from the SLR in quantum wells. We explain the results by a model where SLR process in structures with QDs is modified by the spin diffusion on Mn ions from the QD to a wetting layer.     

Device design with automatic simulation system for basic CCDcharacteristics

A simulation system has been developed to automatically analyze basic electrical characteristics of a charge-coupled device (CCD) image sensor from a process simulation result. This system shortened the simulation period to approximately 1/10 by getting rid of complicated repetitious procedures. A high-performance new cell technology has been developed successfully with improving impurity distribution in shorter development time by using this system. This technology has been realized as a CCD cell pixel with CCD charge quantity of 1.8 times, effective transfer efficiency of over 99%, no image lag for driving read-out pulse voltage in comparison with conventional technology. A 1/4-in 330 K square pixel progressive-scan CCD was fabricated with this technology. These results are described to demonstrate the effectiveness of the automatic simulation system     

Gas phase oxidation of benzene to phenol using Pd-Cu composite catalysts. Effect of temperature,feeding gas and catalyst composition

Catalytic oxidation of benzene in the gas phase has been studied as a function of the catalyst composition, reaction temperature and the feed conditions of reactant gases, hydrogen, oxygen, benzene as well as diluting inert gas. The catalyst tested is composed of Pd and Cu(I) ions, both of which are supported on silica gel. If one of the two metal species is lacked from the catalyst, no catalytic activity appears. The product is almost exclusively phenol and some accompanying benzoquinone, in particular at lower temperatures, as minor byproduct.On leave from Hua-Dong Institute of Technology, Nanjing, People's Republic of China.     

A study on the characteristics of glass fibre reinforced thermoplastics by transfer moulding

Lately, the use of fibre reinforced thermoplastics (FRTP) has increased due to its increased mouldability compared to thermosetting FRP material.

FRTP includes stampable sheet, short and long fibre reinforced thermoplastic pellets, continuous fibre reinforced thermoplastics sheets, etc. The long fibre reinforced thermoplastic (LFRTP) pellet has better mechanical properties than short fibre reinforced pellets and better mouldability than stampable sheet. At present, injection moulding method is mainly used for moulding LFRTP pellets because of its high productivity.

However, the long fibre of LFRTP pellets, whose length is the same as pellet length, is degraded during processing if conventional injection moulding machines are used, and as a result, the mechanical properties are not improved as expected in many cases. Therefore, a new moulding process is required to make good use of LFRTP pellets.

For this study, a transfer moulding apparatus was designed and built to minimize fibre degradation of the moulded parts.

Firstly, the LFRTP pellets with fibre lengths of 3, 6, 9, 12.7 and 17 mm were prepared in order to clarify the difference of mechanical properties due to fibre length. The fibre ratio was 30% in weight for all cases and the same polypropylene was used. They were moulded to the shape of the test specimens. Tensile, bending and Izod impact strengths were measured by using these test specimens. Secondly, LFRTP pellets were moulded to the shape of test specimens by the transfer moulding apparatus and conventional injection moulding machine, and then mechanical properties were measured. At the same time, short fibre pellets were moulded to the smae shape of test specimens by the injection moulding machine, and mechanical properties were compared with those of LFRTP pellets.

With the long glass fibre reinforced polypropylene, good results of fibre preservation and mechanical properties were obtained by the transfer moulding apparatus which was built for this study. The impact strength was increased remarkably as the fibre length increased, and consequently the preservation of fibre length in the moulded parts was especially effective in improving the impact strength.     

Experiment on the absolute measurement of a silicon lattice spacingat the NRLM

An experimental setup for the determination of the silicon lattice constant is described. The monolithic flexure hinge mechanisms for orientation adjustment, an optical interferometer for angle and displacement measurement, and a special tool for establishing the parallelism between the optical surface and the reciprocal lattice vector are introduced. The latest experiment gives a value for the ratio of the optical wavelength to the silicon lattice spacing which is consistent with more established values within a currently large uncertainty of one