Experiment on the absolute measurement of a silicon lattice spacingat the NRLM

An experimental setup for the determination of the silicon lattice constant is described. The monolithic flexure hinge mechanisms for orientation adjustment, an optical interferometer for angle and displacement measurement, and a special tool for establishing the parallelism between the optical surface and the reciprocal lattice vector are introduced. The latest experiment gives a value for the ratio of the optical wavelength to the silicon lattice spacing which is consistent with more established values within a currently large uncertainty of one     

An application of the 2-nitrobenzenesulfenyl method to proteomic profiling of human colorectal carcinoma: A novel approach for biomarker discovery

In the development of novel biomarkers, the proteomic approach is advantageous because using it the cancer-associated proteins can be directly identified. We previously developed a 2-nitrobenzenesulfenyl (NBS) method to improve quantitative proteome analysis. Here, we applied this method to proteomic profiling of colorectal carcinoma (CRC) to identify novel proteins with altered expression in CRC. Each pair of tumor and normal tissue specimens from 12 CRC patients was analyzed, and approximately 5000 NBS-labeled paired peaks were quantified. Peaks with altered signal intensities (>1.5-fold) and occurring frequently in the samples (>70%) were selected, and 128 proteins were identified by MS/MS analyses as differentially expressed proteins in CRC tissues. Many proteins were newly revealed to be CRC related; 30 were reported in earlier studies of CRC. Six proteins that were up-regulated in CRC (ZYX, RAN, RCN1, AHCY, LGALS1, and VIM) were further characterized and validated by Western blot and immunohistochemistry. All six were found to be CRC-localized, either in cancer cells or in stroma cells near the cancer cells. These results indicate that the proteins identified in this study are novel candidates for CRC markers, and that the NBS method is useful in proteome mining to discover novel biomarkers.     

Recursion Schemata for Slowly Growing Depth Circuit Classes

We characterize iterated log depth circuit classes between AC⁰ and AC¹ by Cobham-like bounded recursion schemata. We also give alternative characterizations which utilize the safe recursion method developed by Bellantoni and Cook.     

General structure and characteristics of quick response production system

The diversification and shorter production cycles urge manufacturers to shift their production systems from “make to stock” to “make to order” or an intermediate production system between them. The present paper deals with a production system developed by some manufacturers to meet requirements in the last decade. The system, which we call “Quick response to orders production system” or in brief “quick response production system (QRPS)”, is characterized by two key factors, i.e., “acceptable response time” and “semifinished product.” An acceptable response time is decided through the explicit or implicit approval of customers beforehand and manufacturers guarantee to ship products within an acceptable response time in a stochastic sense by processing the semifinished product according to customer order. As a result, manufacturers are able to reduce the inventory of finished products, while customers are able to enjoy the diversification of products and a stable supply from manufacturers. The general structure and characteristics of QRPS are discussed primarily from a quantitative point of view and a numerical example is shown to assist in understanding the design and operation of QRPS.     

Cooperative behavior of various agents in dynamic environment

The multi-agent model is a model in which agents with limited ability cooperate each other to accomplish a goal. In this paper, we introduce a multi-agent model in which agents are created to imitate real ants. There are two different type of agents, each type of which has a particular task. We designed agents to communicate each other by using pheromone considering noise. On this model, we observed cooperative behavior of agents and evaluated conditions to make an order of behavior in the model.     

Effects of the SiC/Al interface reaction on fracture behavior of a composite conductor using SiC fiber reinforced aluminum for next generation power equipment

Electrical power demands are increasing every year, meaning that lightweight electric cable is needed which has high transmission capacity, high thermal resistance and low sag. Tokyo Electric Power Co., Chubu Electric Power Co. and Hitachi Cable Ltd. have been breaking new ground in the field of electric cable through the development of a SiC fiber reinforced aluminum conductor. In this work, the SiC/Al interface reaction during the manufacturing process and the electricity transmission temperature were studied by transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX) and field emission-Auger electron spectroscopy (FE-AES) for long-term reliability assessment. No reaction products were detected at the SiC/Al interface of elemental wire consisting of 7 SiC/Al preformed wires, indicating that the wire manufacturing process was reliable. An Al₄C₃ product was detected locally at the SiC/Al interface of the wire which had been thermally treated in molten Al under unfavorable conditions. The activation energy, Q, of Al₄C₃ growth at the SiC/Al interface was about 190 kJ/mol. In the temperature range of electricity transmission, Al atoms diffused into SiC fiber during heat treatment, and the amount of the diffused Al increased with increasing treatment temperature and holding time. The activation energy of Al diffusion through the SiC/Al interface to SiC fiber was about 78 kJ/mol. Strength deterioration was not induced by Al diffusion into SiC fiber, but strength strongly depended on the formation of Al₂SiO₅ compound at the SiC/Al interface above 400°C transmission temperatures. Kinetics calculations indicated that the rate of strength deterioration of the composite cable, held at 300°C for 36 years, was about 5%, so that practical use of SiC/Al composite cable should not be far in the future.     

Highly conducting Langmuir-Blodgett films of the TMTTF-CnTCNQ system

Highly conducting Langmuir-Blodgett (LB) films of the tetramethyltetrathia-fulvalene- alkyltetracyanoquinodimethane (TMTTF-C_n TCNQ, where C_n represents C_nH_2n+1) system are reported. The electron affinities of the acceptors C_nTCNQ (n=14, 18 or 22) in solution are almost the same and lie between those of TCNQ and dimethylTCNQ. These TCNQ derivatives form solid charge transfer complexes with TMTTF. The limiting areas of the complexes, normalized to the number of TCNQ derivatives at the air-water interface, are almost the same irrespective of the donor-to-acceptor ratio and of the length of the alkyl chain, indicating that the areas are governed by the TCNQ moiety. The monolayers of TMTTF-C_n TCNQ (n=14 or 18) are transferred onto solid substrates as LB films. Polarized UV-visible absorption spectra indicate that the long axis of TCNQ is parallel to the film surface. These LB films exhibit lateral conductivities as high as 0.4 S cm^-1 and 0.1 S cm^-1 when n=14 and n=18 respectively.     

Ordered Mesoporous Silica Derived from Layered Silicates

Here, the development of ordered mesoporous silica prepared by the reaction of layered silicates with organoammonium surfactants is reviewed. The specific features of mesoporous silica are discussed with relation to the probable formation mechanisms. The recent understanding of the unusual structural changes from the 2D structure to periodic 3D mesostructures is presented. The formation of mesophase silicates from layered silicates with single silicate sheets depends on combined factors including the reactivity of layered silicates, the presence of layered intermediates, the variation of the silicate sheets, and the assemblies of surfactant molecules in the interlayer spaces. FSM‐16‐type (p6mm) mesoporous silica is formed via layered intermediates composed of fragmented silicate sheets and alkyltrimethylammonium (C_nTMA) cations. KSW‐2‐type (c2mm) mesoporous silica can be prepared through the bending of the individual silicate sheets with intralayer and interlayer condensation. Although the structure of the silicate sheets changes during the reactions with C_nTMA cations in a complex manner, the structural units caused by kanemite in the frameworks are retained. Recent development of the structural design in the silicate framework is very important for obtaining KSW‐2‐based mesoporous silica with molecularly ordered frameworks. The structural units originating from layered silicates are chemically designed and structurally stabilized by direct silylation of as‐synthesized KSW‐2. Some proposed applications using these mesoporous silica are also summarized with some remarks on the uniqueness of the use of layered silicates by comparison with MCM‐type mesoporous silica.