ALP住宅

精选理由日本住宅在设计上讲究"小、巧、精致、舒适"的实用主义,特别是在集合住宅中,更会将精致与实用相结合。本案例中,建筑师以折叠的立面挑战传统建筑中方盒子形状的体量,用对角线替代绝对水平及绝对垂直线条,操弄开放与闭合之间的关系,营造实用生活空间的同时不忘精致效果。     

Proposal and development of radial air‐gap coreless generator suitable for small wind turbine used in urban area

Independent distributed power generation using small wind turbines is becoming more widespread as wind power generation increases. Installation of small wind turbines in densely populated urban areas is not only useful from the viewpoint of extracting wind power sources in weak‐wind areas but also for making renewable energy easier to access when power supplies are closer to consumers. It is from this point of view that the authors proposed “urban wind power generation” using a collective system with a number of small vertical wind turbines, and have developed a suitable generator for low‐speed vertical wind turbines such as a Savonius windmill. Based on a standard coreless generator, the proposed generator is designed to make the direction of the magnetic flux radial in order to install the magnets and coils on the outer end of the generator. The change of magnet composition and flux direction maximizes the speed of the flux change and output voltage within a limited space. With the above configuration, the power of the proposed generator is independent of the diameter. In this report, the authors describe and evaluate the fundamental performance of a prototype of the proposed generator. Based on the experiments, a maximum output power of 283 W was obtained. The obtained starting torque is small enough to begin rotation under weak wind conditions of no more than 1 m/s. Therefore, it is clear that the proposed “radial” coreless generator is suitable for self‐starting and producing high power at low wind speed. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 167(1): 26– 34, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20695     

Extending image processing strain measurement system to evaluate fracture behavior of wall-thinned pipes

In this paper, an image processing strain measurement system was extended so that fracture behavior of wall-thinned pipes, such as out of plane and large plastic deformation observed in bulging, can be evaluated by the system. Regular grids with nominal size of 10 mm × 10 mm were marked on 100A carbon steel pipes and the images taken with 6 CCD cameras of 15 million pixels were correlated to achieve resolution of 0.3% strain. Strain of the cylinder's outer surface was evaluated by (1) modeling the grids as a cylindrical shell, (2) measuring deformation of the grid on a projected plane, and (3) applying an updated Lagrangian method. The validity of the system was confirmed by applying the proposed system to the burst tests of a wall-thinned cylinder. In addition, the system measured the non-uniform strain distribution that explained the unexpected cracking location.     

Structure and formation of ant transportation networks

Many biological systems use extensive networks for the transport of resources and information. Ants are no exception. How do biological systems achieve efficient transportation networks in the absence of centralized control and without global knowledge of the environment? Here, we address this question by studying the formation and properties of inter-nest transportation networks in the Argentine ant (Linepithema humile). We find that the formation of inter-nest networks depends on the number of ants involved in the construction process. When the number of ants is sufficient and networks do form, they tend to have short total length but a low level of robustness. These networks are topologically similar to either minimum spanning trees or Steiner networks. The process of network formation involves an initial construction of multiple links followed by a pruning process that reduces the number of trails. Our study thus illuminates the conditions under and the process by which minimal biological transport networks can be constructed.     

Competitive adsorption of fibronectin and albumin on hydroxyapatite nanocrystals

Competitive adsorption of two-component solutions containing fibronectin (Fn) and albumin (Ab) on hydroxyapatite (HAp) nanocrystals was analyzed in situ using the quartz crystal microbalance with dissipation (QCM-D) technique. Adsorption of the one-component protein (Fn or Ab) and the two-component proteins adjusted to different molar ratios of Fn to Ab at a fixed Fn concentration was investigated. The frequency shift (Δf; Hz) and the dissipation energy shift (ΔD) were measured with the QCM-D technique, and the viscoelastic changes of adlayers were evaluated by the saturated ΔD/Δf value and the Voigt-based viscoelastic model. For the adsorption of the one-component protein, the Fn adlayer showed a larger mass and higher viscoelasticity than the Ab adlayer, indicating the higher affinity of Fn on HAp. For the adsorption of the two-component proteins, the viscoelastic properties of the adlayers became elastic with increase in Ab concentration, whereas the adsorption mass was similar to that of Fn in the one-component solution regardless of the Ab concentration. The specific binding mass of the Ab antibody to the adlayers increased with increase in Ab concentration, whereas that of the Fn antibody decreased. Therefore, Fn preferentially adsorbs on HAp and Ab subsequently interacts with the adlayers, indicating that the interfacial viscoelasticity of the adlayers was dominated by the interaction between Fn and Ab.     

Tofu: A 6D Mesh/Torus Interconnect for Exascale Computers

A new architecture with a six-dimensional mesh/torus topology achieves highly scalable and fault-tolerant interconnection networks for large-scale supercomputers that can exceed 10 petaflops.     

Power system control method using customers' energy storage systems and the verification of proposed method

Advanced energy storage systems have been widely applied to industries and are being installed at large buildings and factories to realize efficient energy usage. This paper presents a control method involving load frequency control and distribution network control (loss reduction control) using a part of customers' owned battery capacity. When 10% of total battery capacity of 100 MW in a network of 30‐GW generator capacities is used for load frequency control, a total of 1500‐MW generation units for load frequency control, at maximum, can be stopped without deterioration of power quality. In addition, when batteries are used for loss reduction in a distribution network, 2% of the loss on a summer day can be reduced. To realize both effects to their fullest, a novel integrated control algorithm is proposed and its economic effect is evaluated by numerical simulations. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 165(4): 11–20, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20704     

Influence of γ Irradiation on the Mechanical Strength and In Vitro Biodegradation of Porous Hydroxyapatite/Collagen Composite

Gamma irradiation treatment (GIT) is the most widely used sterilization method for biomaterials in spite of the potential to degrade polymers. The adverse effects of GIT on the mechanical properties and biological stabilities of porous hydroxyapatite/collagen (HAp/Col) composites were investigated in this study. Those properties of a porous HAp/Col composite stabilized by dehydrothermal treatment (DHT) drastically decreased by GIT in the same manner as conventional pure Col materials. DHT after GIT could partially eliminate the adverse effects, due to the introduction of cross-linkage among the degraded Col molecules.     

New cleavable surfactants derived from glucono-1,5-lactone

New amido nonionic cleavable surfactants were synthesized in good yields by the acetalization of glucono-1,5-lactone with octanal, 2-octanone or 2-undecanone, followed by amidation with monoethanolamine, diethanolamine or morpholine. These compounds possessed good water solubilities. The compounds derived from 2-octanone showed higher critical micelle concentrations than the compounds from octanal. For the same hydrophobic chain, both the micelle-forming property and the ability to lower surface tension increased with the change in the terminal amide group in the order diethanolamide<morpholide<monoethanolamide. Interestingly, in spite of their relatively short hydrophobic chains, these compounds showed greater ability to lower surface tension than conventional nonionic surfactants, such as alcohol ethoxylates. Furthermore, their acid-decomposition properties were determined. Their decomposition rates were also compared with that of the corresponding carboxylate type of compound derived from glucono-1,5-lactone.