Characterization and modeling of static and cyclic relaxation in nonconductive adhesives

Adhesive interconnections are considered to be attractive alternatives to lead or lead-free solder interconnects because of their lower processing temperatures and extendability to fine pitch applications. However, reliability issues, such as moisture-induced delamination and viscoelastic relaxation of the adhesive in both steady-state and cyclic loading, continue to pose a challenge to widespread implementation. To date, the static and cyclic relaxation characteristics of nonconductive adhesives (NCAs) are yet to be understood. This paper attempts to provide insights into this static and cyclic relaxation behavior through experimental characterization and modeling. The viscoelastic property of a typical NCA material was characterized, and a simulation program with integrated circuit emphasis (SPICE) modeling program was used to model the cyclic relaxation behavior. The modeling results were successfully validated with a series of experiments. This showed that cyclic relaxation of the adhesive can be successfully modeled using linear-viscoelastic property. The phenomenon of slower relaxation of the adhesive under cyclic loading than that in static loading suggests that accelerated reliability testing used in solder-joint fatigue durability investigations may not be directly applicable to the adhesive interconnections. A rework methodology applicable to adhesive interconnects using cyclic loading has also been proposed.     

Frequency Sensitivity and Electromechanical Propagation Simulation Study in Large Power Systems

A global view of power system's frequency behavior opens up a new window for analyzing system's dynamics. With the aid of global positioning system, measurements from different locations would have synchronous time; therefore a system-wide observation and analysis would be possible. As part of the US-wide power frequency monitoring network project this paper focus on simulation study results of power frequency dynamics of the Eastern U.S. system. The study assesses the frequency measurement accuracy needed to observe frequency dynamics from events such as remote generation drops. Electromechanical-wave propagation phenomena during system disturbances have been observed. The speeds of electromechanical-wave propagation in different areas of the U.S. systems were estimated and their characteristics were discussed.     

Existence of some extremal self-dual codes

Two new singly-even extremal, self-dual codes are constructed: a [52,26,10] code and a [54,27,10] code     

Nanoporous platinum counter electrodes by glancing angle deposition for dye-sensitized solar cells

We report an effective way to produce nanoporous Pt counter electrodes of dye-sensitized solar cells by the glancing-angle deposition (GLAD) technique. By controlling the orientation of the substrate relative to the incident Pt vapor flux during the deposition, nanoporous films composed of inclined nm-scale columns were produced through the self-shadowing effect. Pt counter electrodes having varied nanoporous structures were characterized for their morphological and electrochemical properties, and were subjected to device studies to establish the correlation with DSSC characteristics/performances. The results suggest that the nanoporous GLAD Pt electrodes can effectively enhance active surface areas, the catalytic ability and charge exchange at the Pt/electrolyte interface of a DSSC. As a result, the quantum efficiency, short-circuit current, and power conversion efficiency of the DSSC can be enhanced by up to 12–13% with using the nanoporous GLAD Pt counter electrodes.     

Understanding the relationship between intensity and gratifications of Facebook use among adolescents and young adults

Facebook is a well-known computer-mediated communication platform considered popular among adolescents and young adults. New media scholars have coined the term “intensity of Facebook use” (IFU) for the concept that measures the emotional and affective attitude towards Facebook use among young people. IFU is an important service use concept that has been positively linked with the different psychosocial outcomes of student well-being. However, only a limited amount of the prior literature has investigated the relationship between IFU and different Facebook uses and gratifications (U&G). The existing literature suggests inconsistent findings with a sole emphasis on young adults. To address these gaps, the present study has investigated the differential role of different Facebook U&G among adolescents and young adults in predicting IFU. A total of three cross-sectional data sets (N = 373, 107, 105) represented adolescents and university-attending young-adult Facebook users. The study results suggest that process U&G do and content U&G do not play any significant role in predicting IFU. Adolescents and young adults differ in their sought Facebook U&G. In addition to this, cultural differences were observed in the sought Facebook U&G and their differential role in predicting IFU.     

A rate-distortion analysis on motion prediction efficiency and mode decision for scalable wavelet video coding

A rate-distortion model for describing the motion prediction efficiency in interframe wavelet video coding is proposed in this paper. Different from the non-scalable video coding, the scalable wavelet video coding needs to operate under multiple bitrate conditions and it has an open-loop structure. The conventional Lagrangian multiplier, which is widely used to solve the rate-distortion optimization problems in video coding, does not fit well into the scalable wavelet structure. In order to find the rate-distortion trade-off due to different bits allocated to motion and textual information, we suggest a motion information gain (MIG) metric to measure the motion prediction efficiency. Based on this metric, a new cost function for mode decision is proposed. Compared with the conventional Lagrangian method, our experiments show that the proposed method is less extraction-bitrate dependent and generally improves both the PSNR performance and the visual quality for the scalability cases.     

An alternative method to fabricate the planar-type resonant-cavity light-emitting diodes by using silicon oxide for short-reach communications

In this article, the silicon oxide (SiO_x) planarization technique is presented to fabricate the 650-nm resonant-cavity light-emitting diodes (RCLEDs). The performances of RCLEDs are characterized by forward voltage, light output power, external quantum efficiency, emission spectrum, and dynamic response. As a result, the device with the SiO_x-planarized layer exhibits a low operating voltage of 2.3 V at 20 mA, a maximum light output power of 304 μW at 15 mA, and the best external quantum efficiency of 3% at 1.2 mA. In addition, the SiO_x-planarized device exhibits temperature insensitivity as compared to the device without it. The RCLED with a 30-μm diameter shows the maximum 3 dB frequency bandwidth of 275 MHz at a driving current of 40 mA. Finally, the RCLED with a SiO_x-planarized layer shows a clear eye-opening feature as operating at 100 Mbit/s at 20 mA. These results indicate that such LEDs are excellent candidates for use in high-speed short-reach plastic optical fiber communications.     

Low Area/Power Synthesis Using Hybrid Pass Transistor/CMOS Logic Cells in Standard Cell-Based Design Environment

This brief presents a logic synthesis flow that depends on the popular Synopsys Design Compiler to perform logic translation and minimization based on the standard cell library with both pass transistor logic (PTL) and CMOS logic cells. The hybrid PTL/CMOS logic synthesis can generate appropriate circuits considering various design constraints. The proposed multilevel PTL logic cells are automatically constructed from only a few basic cells. Postlayout simulations with UMC 90-nm technology are presented based on the standard cell library with pure PTL, pure CMOS, or hybrid PTL/CMOS cells. Experimental results show that, in most cases, pure PTL circuits have smaller area and power, whereas CMOS circuits, in general, have smaller delay.      

Iterative multiuser detector-decoding for nonbinary LDPC coded multicarrier MFSK systems

Telecommunication Systems - This paper investigates an iterative multiuser detection for nonbinary low density parity check (LDPC) coded multicarrier multiple level frequency shift keying system to...     

A Distribution Management System for Relational Databases in Cloud Environments

For a transaction processing system to operate effectively and efficiently in cloud environments, it is important to distribute huge amount of data while guaranteeing the ACID (atomic, consistent, isolated, and durable) properties. Moreover, database partition and migration tools can help transplanting conventional relational database systems to the cloud environment rather than rebuilding a new system. This paper proposes a database distribution management (DBDM) system, which partitions or replicates the data according to the transaction behaviors of the application system. The principle strategy of DBDM is to keep together the data used in a single transaction, and thus, avoiding massive transmission of records in join operations. The proposed system has been implemented successfully. The preliminary experiments show that the DBDM performs the database partition and migration effectively. Also, the DBDM system is modularly designed to adapt to different database management system (DBMS) or different partition algorithms.