Oscillation of a tilted circular pad on a droplet for the self-alignment process

The seesaw-oscillation of a small circular pad on a single droplet was studied both numerically and experimentally. The circular pad with a diameter of 2.0–3.8 mm onto a water or glycerol droplet with a volume of 1–10 μL, and a bottom substrate with a smaller diameter than that of the pad were used in the experiment. The pad was then tilted and then the tilting fixture was quickly removed. The pad alternately oscillated and then finally stabilized in a horizontal position. The numerical model considering the surface tension and the viscous force of the droplet was developed and calculated using the same configurations as those in the experiment. The experimental and numerical data showed good agreement not only in terms of the oscillating frequency and damping ratio but the transient motion of the circular pad and instantaneous droplet surface shape.     

Aqueous solution behavior of cationic surfactants containing sulfide linked alkyl chain

Cationic surfactants containing a thioether group in the hydrophobic chain were prepared by the reaction of alkanethiol and bromocholine bromide. The aqueous solution properties of the thio-surfactants were investigated and compared with conventional cationic surfactants. The Krafft temperatures of the thio-surfactants were lower than that of alkyltrimethylammonium bromide. The critical micelle concentrations were determined by the conductivity method, and pyrene and SPQ fluorescence probe methods. A linear relation was observed for the plots of cmc vs. chain length. However, the cmc of the thio-surfactants depended on the position of the thioether group in the hydrophobic alkyl chain. It was found that the thioether group exhibited quenching ability toward SPQ fluorescence. The variation of the surfactant monomer concentration in equilibrium with micelles can be estimated from Stern-Volmer plots.     

Aqueous solution properties of disulfide-linked fluorinated gemini and cleaved monomeric thiol surfactants

We prepared a fluorinated gemini surfactant containing a disulfide bond in its spacer chain, [C?F??(CH?)?N(CH?)?CH?CH?SSCH?CH?N(CH?)?(CH?)?C?F??]2Cl, and its analogue with a hexamethylene spacer. Monomeric thiol surfactant, [C?F??(CH?)?N(CH?)?CH?CH?SH]Cl, was readily produced by the cleavage of the gemini surfactant using dithiothreitol in water. The critical micelle concentration was determined using surface tension, conductivity, and fluorescence probe methods. The critical micelle concentration of the monomeric surfactant was significantly larger than that of the gemini surfactant. The surface tension of aqueous solution for the cleaved monomeric thiol surfactant returned gradually to the original value through the formation of the disulfide bond via air oxidation.     

Efficient electrochemical decomposition of perfluorocarboxylic acids by the use of a boron-doped diamond electrode

The electrochemical decomposition of environmentally persistent perfluorooctanoic acid (PFOA) was achieved by the use of a boron-doped diamond (BDD) electrode. The PFOA decomposition follows pseudo-first-order kinetics, with an observed rate constant (k₁) of 2.4 × 10^− 2 dm³ h^− 1. Under the present reaction conditions, k₁ increased with increasing current density and saturated at values over 0.60 mA cm^− 2. Therefore, the rate-limiting step for the electrochemical decomposition of PFOA was the direct electrochemical oxidation at lower current densities. In the proposed decomposition pathway, direct electrochemical oxidation cleaves the C-C bond between the C₇F₁₅ and COOH in PFOA and generates a C₇F₁₅ radical and CO₂. The C₇F₁₅ radical forms the thermally unstable alcohol C₇F₁₅OH, which undergoes F⁻ elimination to form C₆F₁₃COF. This acid fluoride undergoes hydrolysis to yield another F⁻ and the perfluorocarboxylic acid with one less CF₂ unit, C₆F₁₃COOH. By repeating these processes, finally, PFOA was able to be totally mineralized to CO₂ and F⁻. Moreover, whereas the BDD surface was easily fluorinated by the electrochemical reaction with the PFOA solution, medium pressure ultraviolet (MPUV) lamp irradiation in water was able to easily remove fluorine from the fluorinated BDD surface.     

Double layer capacitance of high surface area carbon nanospheres derived from resorcinol–formaldehyde polymers

Micro-mesoporous bimodal carbon nanospheres with high surface areas were synthesized by a combined use of surfactant templating technique and BaO₂ chemical activation one. Starting spherical nanopolymer/surfactant composites were prepared by the NaOH-catalyzed reaction of resorcinol (R) and formaldehyde (F) in the presence of cetyltrimethylammonium bromide (CTAB) as a core template and 1,3,5-trimethylbenzene (TMB) and tert-butanol (t-BuOH) as cosurfactants. After pretreatment with hydrochloric acid, the composite materials were calcined at 1000 °C in N₂ coexistent with varying weight ratios of BaO₂ to RF polymer ranging from 0 to 11. It produced micro-mesoporous bimodal carbon nanospheres of 124–143 nm diameter, with specific surface areas as high as 1884 m² g⁻¹ or up to 3301 m² g⁻¹, in contrast to microporous ones with smaller surface areas obtained at low BaO₂-loadings. The electrochemical double layer capacitance of the resulting nanocarbons in 0.5 M H₂SO₄ showed a marked increase with specific surface areas, up to as high as 219 F g⁻¹ for the highest surface area carbon material.     

Ethanolamine Is a New Anti-Prion Compound

Prion diseases are a group of fatal neurodegenerative disorders caused by accumulation of proteinaceous infectious particles, or prions, which mainly consist of the abnormally folded, amyloidogenic prion protein, designated PrP^Sc. PrP^Sc is produced through conformational conversion of the cellular isoform of prion protein, PrP^C, in the brain. To date, no effective therapies for prion diseases have been developed. In this study, we incidentally noticed that mouse neuroblastoma N2a cells persistently infected with 22L scrapie prions, termed N2aC24L1-3 cells, reduced PrP^Sc levels when cultured in advanced Dulbecco’s modified eagle medium (DMEM) but not in classic DMEM. PrP^C levels remained unchanged in prion-uninfected parent N2aC24 cells cultured in advanced DMEM. These results suggest that advanced DMEM may contain an anti-prion compound(s). We then successfully identified ethanolamine in advanced DMEM has an anti-prion activity. Ethanolamine reduced PrP^Sc levels in N2aC24L1-3 cells, but not PrP^C levels in N2aC24 cells. Also, oral administration of ethanolamine through drinking water delayed prion disease in mice intracerebrally inoculated with RML scrapie prions. These results suggest that ethanolamine could be a new anti-prion compound.     

Adhesion between polymer surface modified by graft polymerization and tissue during surgery using an ultrasonically activated scalpel device

In the field of surgery, achieving adhesion between a polymer implant and tissue poses a challenge considering that suturing is not appropriate for the stability of such implants. An ultrasonically activated scalpel that generates heat by mechanical vibration and promotes adhesion between a polymer implant and native tissue by pressing the two materials together has very good potential for application in the field. To determine the type of polymer that is suitable for the purpose, we investigated polyethylene (PE) and polystyrene (PS) films, the surfaces of which were activated by corona discharge. Graft polymerization was then performed on the corona‐treated surfaces to vary their properties. The corona‐treated PE and PS films grafted with poly(acrylic acid), poly(methacrylic acid), poly(vinyl benzylacrylic acid), and poly(hydroxylethyl acrylate), respectively, adhered to the tissue when the ultrasonically activated scalpel was applied. The heat generated by the mechanical vibration and the applied pressure enabled the carboxyl or hydroxyl groups to bond with the proteins in the extracellular matrix. We therefore concluded that it was possible to integrate this technique in the development of new types of polymer devices that could be stably implanted in a living body. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40885.     

Postfunctionalization of aromatic polyamine by [2+2] cycloaddition of 7,7,8,8-tetracyanoquinodimethane with side chain alkynes

Electron-rich, side chain alkynes of an aromatic polyamine were functionalized by a [2+2] cycloaddition, followed by retro-cyclization with the electron-accepting 7,7,8,8-tetracyanoquinodimethane (TCNQ). ¹H NMR studies were used to optimize the reaction conditions. Mild heating to >50?°C afforded the postfunctionalized aromatic polyamines with the desired acceptor amounts. The quantitative TCNQ addition was demonstrated by the MALDI-TOF mass spectrum and elemental analysis. Introduction of the cyano-based acceptor moieties into the polymer side chains resulted in unusually strong intermolecular interactions. In addition to the ?ШC?? interactions of the extended acceptor moieties, these intermolecular forces were supposed to improve the thermal stability of the aromatic polymers. Furthermore, the donor?Cacceptor chromophores formed by this postfunctionalization displayed low energy charge-transfer bands and redox activities in both the anodic and cathodic directions. The straightforward postfunctionalization technique using the alkyne?CTCNQ addition is useful for the preparation of narrow band gap polymers in one step.     

Study of the Antioxidative Properties of Several Amino Acid-Type Surfactants and their Synergistic Effect in Mixed Micelle

Cysteine and methionine, two sulfur-containing amino acids (AA), were introduced in their surfactant forms as potential antioxidants. The antioxidative (AOX) properties of lauroyl methionine (C12-Met) and lauroyl cysteine (C12-Cys) was investigated by means of the oxygen radical absorbance capacity assay. Both the surfactants exhibited excellent AOX behavior at the premicellar state and micellar medium. The AOX behavior was found to be comparable for both the surfactants at their premicellar states. However, in micellar medium, C12-Met showed better AOX property than C12-Cys. The AOX power of the surfactants was compared with other previously developed AA-type surfactants. The order of the AOX power was found to be: C12-tryptophan > C12-tyrosine ≈ C12-methionine ≈ C12-cysteine > C12-histidine at the premicellar state and C12-tryptophan > C12-tyrosine > C12-methionine > C12-cysteine > C12-histidine at the micellar state. C12-Cys displayed lower AOX property in micellar medium due to its dimer formation tendency. Based on the HPLC and UPLC-Q-TOF-MS analysis, the dimer formation of C12-Cys was found to be accelerated due to the micellar environment and results into negative synergistic effect on other aromatic AA-type surfactants. However, the presence of C12-His in the micellar solution of C12-Cys resulted no synergistic effect due to stronger H-bonding between the surfactants and resulting less dimer formation.     

Composition Regulation by Flow Copolymerization of Methyl Methacrylate and Glycidyl Methacrylate with Free Radical Method

It is important to match the feeding ratio of comonomers to the composition ratio in the resulting copolymers as closely as possible in industrial production, where the goal is often to produce more a homogeneous composition in copolymers. In this study, a flow copolymerization system with a conventionally initiated free radical method, together with randomly selected polymerization conditions is investigated. It is succeeded in achieving a closer match between the composition ratio and feeding ratio than previously reported in the copolymerization of styrene with methyl methacrylate and of glycidyl methacrylate with methyl methacrylate, which will widen the range of applications, by precisely controlling the mixing and heating in a flow polymerization apparatus. This is confirmed by the fact that the estimated values of reactivity ratios, r₁ and r₂, which are used in the reaction kinetics of copolymerization, are close to 1.