Correlative MR-anatomic study of the median nerve

OBJECTIVE: The purpose of our study was to evaluate the effectiveness of MR imaging for showing the intrinsic anatomy of a peripheral nerve. Cadaver wrist specimens that included the median nerve were imaged with MR imaging at 3 T, then sectioned, stained, and inspected grossly and microscopically. The size, shape, and signal intensity of the sheath and axonal structures in the median nerve were identified in MR images by comparison with anatomic sections. CONCLUSION: This study suggests that MR imaging with sufficiently high-resolution techniques shows the internal structure of peripheral nerves. These results suggest that MR imaging may be a means to distinguish neuritis, tumor, degeneration, or fatty proliferation in a peripheral nerve and to evaluate the nerve before microsurgical anastomosis.     

双机同轴拖动系统扭转振动分析

介绍了两台柴油机同轴拖动一台发电机轴系扭转振动的特点，以6000kW柴油发电机组为实例，计算分析了两台柴油机的列间发火间隔角，联接相位角、功率不平衡对轴系扭转振动的影响。     

Optically tuned superconductive-dielectric resonators with whispering-gallery modes

An analytical method is presented for calculating the resonant frequency andQ-factor of a superconducting dielectric disk resonator operating in millimeter-wave regime with whispering-gallery mode. Resonant frequency shift due to the optical generation of quasi-particles in superconducting film is investigated as a function of photon flux. An optically tunable resonant frequency of about 500 MHz is estimated, and good agreement is found between numerical results and experimental ones.     

饮用水氯化中氯仿形成的动力学模式

以黄腐酸（ＦＡ）为卤仿前驱物质，分别测定不同投氯量、ＴＯＣ水平、温度以及ｐＨ值对ＣＨＣｌ３形成速率的影响，确定出ＣＨＣｌ３形成的动力学模式。该模式可用于预测投氯后的管网水中ＣＨＣｌ３的形成量，以便采取必要措施保证饮用水符合国家规定ＣＨＣｌ３〈６０μｇ／Ｌ的标准。     

Multigrid computation for curve fitting in the wavelet domain

A multi-layer multigrid algorithm for curve fitting in the wavelet domain is presented. This algorithm is achieved by applying a wavelet transform to each grid of the conventional multigrid structure. Using a wavelet transform, the convergent rate in each grid is improved and the total system can converge more quickly     

吸附法脱除乙烯中少量氧气的吸附剂研究

采用重量法在电子天平上研究了Ｃ２Ｈ４和Ｏ２单组份在５Ａ、１３Ｘ、丝光沸石和碳分子筛等不同吸附剂上的吸附平衡性质和扩散动力学性质。结果表明，在沸石类吸附剂上，Ｃ２Ｈ４的平衡吸附量远大于Ｏ２的平衡吸附量，Ｃ２Ｈ４的吸附扩散速率也大于Ｏ２的扩散速率；在碳分子筛吸附剂上Ｃ２Ｈ４的平衡吸附量大于Ｏ２的平衡吸附量，但Ｏ２的吸附扩散速率远大于Ｃ２Ｈ４的扩散速率，其扩散系数是Ｃ２Ｈ４的２３９倍。单柱评价结果表明，Ｃ２Ｈ４－Ｏ２混合组份通过该碳分子筛吸附剂时，Ｏ２的破点时间长，Ｃ２Ｈ４的纯度可达１００％。加压有利于选择吸附Ｏ２，而且加压吸附、常压脱附再生性能好。该碳分子筛是脱除高浓度乙烯中少量氧气的理想吸附剂。     

4- and 13-GHz tuned amplifiers implemented in a 0.1-μm CMOStechnology on SOI, SOS, and bulk substrates

Four- and 13-GHz tuned amplifiers have been implemented in a partially scaled 0.1-1 μm CMOS technology on bulk, silicon-on-insulator (SOI), and silicon-on-sapphire (SOS) substrates. The 4-GHz bulk, SOI, and SOS amplifiers exhibit forward gains of 14, 11, and 12.5 dB and F_min's of 4.5 (bulk) and 3.5 db (SOS). The 13-GHz SOS and SOI amplifiers exhibit gains of 15 and 5.3 dB and F_unn's of 4.9 and 7.8 dB. The 4-GHz bulk amplifier has the highest resonant frequency among reported bulk CMOS amplifiers, while the 13-GHz SOS and SOI amplifiers are the first in a CMOS technology to have tuned frequencies greater than 10 GHz. These and other measurement results suggest that it may be possible to implement 20-GHz tuned amplifiers in a fully scaled 0.1-1 μm CMOS process     

离子液体催化C_5馏分中二烯烃的聚合反应

合成了多种基于1-丁基-3-甲基咪唑阳离子的离子液体,并作为裂解C5馏分中混合二烯烃聚合反应的介质。考察了离子液体种类、反应温度、反应时间和添加Lew is酸对混合二烯烃聚合反应的影响。实验结果表明,以硝酸根为阴离子的离子液体对混合二烯烃的聚合反应具有一定的阻聚作用;以六氟磷酸根为阴离子的离子液体能明显促进混合二烯烃的聚合反应,提高二聚物的含量;添加Lew is酸(质量分数为1%的ZnCl2)的离子液体对混合二烯烃的聚合反应具有更明显的促进作用,其效果仅次于酸性氯铝酸类离子液体,反应温度以30℃以下为宜,温度过高将促使二聚物进一步聚合,形成三聚物乃至多聚物,降低二聚物的含量。     

Eight-channel bidirectional WDM add/drop multiplexer

The authors propose and demonstrate an eight-channel reconfigurable bidirectional wavelength division multiplexed (WDM) add-drop multiplexer in which all channels can be added/dropped independently in either direction. The performance of the bidirectional WDM add/drop multiplexer is experimentally studied for a data rate of 10 Gbit/s per channel, providing an overall capacity of 80 Gbit/s. It is found that the performance of the add/drop multiplexer is not degraded by a backward propagating signal