Effect of nonlinear partial slip and thermal radiation on Oldroyd 8‐constant fluid in a channel with convective boundary condition

This investigation deals with the effects of nonlinear slip, nonlinear thermal radiation, and non‐Newtonian flow parameters on heat transfer of an incompressible magnetohydrodynamic steady flow of an Oldroyd 8‐constant fluid through two parallel infinite plates with convective cooling. The Rosseland approximation is adopted to simulate the radiation effects. Heat exchange with the surrounding at the surfaces is assumed to obey Newton's law of cooling. The system of coupled and highly nonlinear ordinary differential equations governing the model is solved numerically using the method of weighted residual. The combined effects of non‐Newtonian flow parameters, velocity slip parameter, magnetic field parameter, Biot numbers, thermal radiation on the fluid velocity, temperature distributions, skin friction, and the Nusselt number are presented graphically and discussed. It is found that the velocity slip has an increasing effect on the fluid velocity and temperature profiles. For larger values of the thermal radiation parameter, the temperature profile and the Nusselt number are noticed to be increased.     

Second law analysis of a fossil-geothermal hybrid power plant with thermodynamic optimization of geothermal preheater

There is an urgent and compelling need to develop innovative and more effective ways to integrate sustainable renewable energy solutions into the already existing systems or, better yet, create new systems that all together make use of renewable energy. This study aims to establish the optimum working conditions of a geothermal preheater in a power plant that makes use of both renewable and nonrenewable energy resources, where renewable (geothermal) energy is used to boost the power output in an environmentally sustainable way. Hence, two models, one, a simplified model of a Rankine cycle with single reheat and regeneration, and another, with a geothermal preheater substituting the low-pressure feedwater heater (LPFWH), were compared. The Engineering Equations Solver software was used to perform an analysis of the thermodynamic performance of the two models designed. An analysis was done to evaluate the energetic and exergetic effects of replacing a LPFWH with a geothermal preheater sourcing heat from a low temperature geothermal resource (100°C-160°C). Results from the thermodynamic analysis reveal that the hybridization boosts the power output by approximately 4% and it is superior in terms of the second law. Entropy generation minimization analysis was then employed to establish optimal working conditions of the hybrid system (ie, the geothermal preheater modeled as a downhole coaxial heat exchanger).     

On the Use of Low-Pass Filters for Image Processing with Inverse Laplacian Models

A novel signal processing-oriented approach to solving problems involving inverse Laplacians is introduced. The Monogenic Signal is a powerful method of computing the phase of discrete signals in image data, however it is typically used with band-pass filters in the capacity of a feature detector. Substituting low-pass filters allows the Monogenic Signal to produce approximate solutions to the inverse Laplacian, with the added benefit of tunability and the generation of three equivariant properties (namely local energy, local phase and local orientation), which allow the development of powerful numerical solutions for a new set of problems. These principles are applied here in the context of biological cell segmentation from brightfield microscopy image data. The Monogenic Signal approach is used to generate reduced noise solutions to the Transport of Intensity Equation for optical phase recovery, and the resulting local phase and local orientation terms are combined in an iterative level set approach to accurately segment cell boundaries. Potential applications of this approach are discussed with respect to other fields.     

Bioactive Compounds and Antioxidant Activity in Different Types of Berries

Berries, especially members of several families, such as Rosaceae (strawberry, raspberry, blackberry), and Ericaceae (blueberry, cranberry), belong to the best dietary sources of bioactive compounds (BAC). They have delicious taste and flavor, have economic importance, and because of the antioxidant properties of BAC, they are of great interest also for nutritionists and food technologists due to the opportunity to use BAC as functional foods ingredients. The bioactive compounds in berries contain mainly phenolic compounds (phenolic acids, flavonoids, such as anthocyanins and flavonols, and tannins) and ascorbic acid. These compounds, either individually or combined, are responsible for various health benefits of berries, such as prevention of inflammation disorders, cardiovascular diseases, or protective effects to lower the risk of various cancers. In this review bioactive compounds of commonly consumed berries are described, as well as the factors influencing their antioxidant capacity and their health benefits.     

A multi-nutrient supplement reduced markers of inflammation and improved physical performance in active individuals of middle to older age: a randomized, double-blind, placebo-controlled study

Background

Evidence suggests that folate deficiency may be causatively linked to depressive symptoms. However, little is known on the status of use of folic acid and vitamin supplements among people with mental disorders. This study examined the prevalence and the likelihood of use of folic acid or vitamin supplements among adults with depression and anxiety in comparison to those without these conditions.

Methods

Using data from 46, 119 participants (aged ≥ 18 years) in the 2006 Behavioral Risk Factor Surveillance System survey, we estimated the adjusted prevalence and odds ratios with 95% confidence intervals for taking folic acid and vitamin supplements among those with ever diagnosed depression (n = 8, 019), ever diagnosed anxiety (n = 5, 546) or elevated depressive symptoms (n = 3, 978, defined as having a depression severity score of ≥ 10 on the Patient Health Questionnaire-8 diagnostic algorithm).

Results

Overall, women were more likely than men to take folic acid supplements 1-4 times/day (50.2% versus 38.7%, P < 0.001) and vitamin supplements (62.5% versus 49.8%, P < 0.001). After multivariate adjustment, men with ever diagnosed depression or anxiety were 42% and 83%, respectively, more likely to take folic acid supplements < 1 time/day; 44% and 39%, respectively, more likely to take folic acid supplements 1-4 times/day; and 40% and 46%, respectively, more likely to take vitamin supplements compared to men without these conditions (P < 0.05 for all comparisons). Women with ever diagnosed depression were 13% more likely to take folic acid supplements 1-4 times/day and 15% more likely to take vitamin supplements than women without this condition (P < 0.05 for both comparisons). Use of folic acid and vitamin supplements did not differ significantly by elevated depressive symptoms in either sex.

Conclusion

The prevalence and the likelihood of taking folic acid and vitamin supplements varied substantially by a history of diagnosed depression among both men and women and by a history of diagnosed anxiety among men, but not by presence of elevated depressive symptoms in either sex.     

Maximum heat transfer density with rotating cylinders aligned in cross-flow

In this paper, we study the thermal behavior of an assembly of rotating cylinders aligned in a cross-flow. The objective is to maximize the heat transfer rate density of the assembly, i.e. the overall heat transfer dissipated per unit of volume, under fixed pressure drop. A numerical model is used to solve the governing equations. Two configurations are studied: i) the cylinders rotate in the same direction, and ii) consecutive cylinders rotate in opposite directions. The spacing between consecutive cylinders is optimized in each case. The second configuration proved to be the more efficient. In that configuration, it is also possible to optimize further the architecture by using a smaller spacing for the flow passage in which the flow is in the direction of the cylinders rotation, and larger spacing for the flow passage in which the cylinders oppose the main stream.     

Fitting the duct to the “body” of the convective flow

This paper is a proposal to design flow structures with maximal heat transfer rate per unit volume, by shaping each duct so that it fits optimally on the body of the convective flow. Optimally shaped ducts can be assembled into larger constructs. Two examples are given. In the first, a heat-generating strip is cooled inside a duct of rectangular cross-section. The duct geometry has two degrees of freedom, which can be selected so that the fixed duct volume packs a maximum of heat transfer rate. In the second example, the duct is a tube with isothermal internal surface, and the flow is sufficiently slow so that boundary layers do not form inside the duct. Once again, the duct aspect ratio can be optimized for maximal heat transfer rate density. Further improvements can be sought by endowing the duct geometry with more degrees of freedom.     

Titanium deposited from TiCl4 on amorphous silica and silicalite-1 as catalyst in aromatic hydroxylation reactions

Titanium deposited from TiCl₄ on crystalline or amorphous SiO₂ catalyses the hydroxylation of phenol with aqueous H₂O₂. The amorphous silica-supported titanium shows a high rate of hydrogen peroxide conversion, however with a low selectivity towards aromatic hydroxylation products. A silicalite-supported titanium catalyst exhibits an efficiency towards hydroxylation products, based on hydrogen peroxide conversion, that is equal to that of titanium-silicalite-1 (TS-1), however with a lower activity.     

Hemorheological and Microcirculatory Factors in Liver Ischemia-Reperfusion Injury—An Update on Pathophysiology,Molecular Mechanisms and Protective Strategies

Hepatic ischemia-reperfusion injury (IRI) is a multifactorial phenomenon which has been associated with adverse clinical outcomes. IRI related tissue damage is characterized by various chronological events depending on the experimental model or clinical setting. Despite the fact that IRI research has been in the spotlight of scientific interest for over three decades with a significant and continuous increase in publication activity over the years and the large number of pharmacological and surgical therapeutic attempts introduced, not many of these strategies have made their way into everyday clinical practice. Furthermore, the pathomechanism of hepatic IRI has not been fully elucidated yet. In the complex process of the IRI, flow properties of blood are not neglectable. Hemorheological factors play an important role in determining tissue perfusion and orchestrating mechanical shear stress-dependent endothelial functions. Antioxidant and anti-inflammatory agents, ischemic conditioning protocols, dynamic organ preservation techniques may improve rheological properties of the post-reperfusion hepatic blood flow and target endothelial cells, exerting a potent protection against hepatic IRI. In this review paper we give a comprehensive overview of microcirculatory, rheological and molecular–pathophysiological aspects of hepatic circulation in the context of IRI and hepatoprotective approaches.