纳米线/模板共构染料敏化二氧化钛太阳电池的制备

以清洁、制备过程简单、成本低廉的阴极电弧离子镀在低温成长染料敏化二氧化钛太阳能电池的二氧化钛模板,从模板上利用水热法生长出二氧化钛纳米线,形成理想的染料敏化太阳电池异质接面,具有高比表面积并利于染料的吸收,从而提升电池效率.最后加以封装成ITO glass/AIP-TiO2/[TiO2-nanowire(N3 dye)]/I2 LiI electrolyte/Pt/ITO glass太阳能电池组件,探讨了其微观结构对染料敏化二氧化钛太阳能电池光电转换效率的影响.     

1-甲基-3-(7-氟-4-炔丙基-1,4-苯并噁嗪-3-酮-6-基)-1,3-喹唑啉-2,4-二酮的合成及其除草活性

标题化合物(SYP-298)是沈阳化工研究院的试验除草剂,由邻硝基苯甲酸经5步反应制得。其结构经核磁共振谱和质谱分析确证。SYP-298在温室条件下38 g a.i./hm2可防多种阔叶杂草,在600 g a.i./hm2对玉米和水稻安全。     

Physical gelation of crystallizing metallocene and Ziegler-Natta ethylene-hexene copolymers

The effect of molecular architecture on the evolution of viscoelastic properties during crystallization was investigated using ethylene-hexene copolymers manufactured via metallocene (M-LLDPE) and Ziegler-Natta (ZN-LLDPE) processes. Differences in branching distribution were shown to have a drastic effect on the viscoelastic properties near the gel point. It is shown that the branching distribution rather than branch content is the determining parameter for the evolution of the rheological properties during isothermal and non-isothermal crystallization, and for the width of the solidification interval. We developed a partial melting technique for the preparation of stable critical gels of LLDPE whose viscoelastic properties correspond to the intermediate state between melt and solid. Local molecular conformation and crystallinity in these gels were characterized by Raman spectroscopy, which shows that the transition from melt-like to solid-like rheological behavior (physical gelation) in LLDPE occurs at a very low overall crystallinity of less than 5%.     

Phase behavior of ternary polymer blends with favorable interactions

Atactic poly(methyl methacrylate) (aPMMA) and poly(vinyl pyrrolidone) (PVP) with a weight‐average molecular weight of 360,000 g/mol were found to be immiscible on the basis of preliminary studies. Poly(styrene‐co‐vinyl phenol) (MPS) with a certain concentration of vinyl phenol groups is known to be miscible with both aPMMA and PVP. Is it possible to homogenize an immiscible aPMMA/PVP pair by the addition of MPS? For this question to be answered, a ternary blend consisting of aPMMA, PVP, and MPS was prepared and measured calorimetrically. The role of MPS between aPMMA and PVP and the effects of different concentrations of vinyl phenol groups on the miscibility of the ternary blends were investigated. According to experimental results, increasing the vinyl phenol contents of MPS has an adverse effect on the miscibility of the ternary blends. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2064–2070, 2005     

Isothermal crystallization kinetics and melting behavior of nylon/saponite and nylon/montmorillonite nanocomposites

DSC thermal analysis and X‐ray diffraction have been used to investigate the isothermal crystallization behavior and crystalline structure of nylon 6/clay nanocomposites. Nylon 6/clay has prepared by the intercalation of ε‐caprolactam and then exfoliating the layered silicates by subsequent polymerization. The DSC isothermal results reveal that introducing saponite into the nylon structure causes strongly heterogeneous nucleation induced change of the crystal growth process from a two‐dimensional crystal growth to a three dimensional spherulitic growth. But the crystal growth mechanism of nylon/montmorillonite nanocomposites is a mixed two‐dimensional and three‐dimensional spherulitic growth. The activation energy drastically decreases with the presence of 2.5 wt % clay in nylon/clay nanocomposites and then slightly increases with increasing clay content. The result indicates that the addition of clay into nylon induces the heterogeneous nucleation (a lower ΔE) at lower clay content and then reduces the transportation ability of polymer chains during crystallization processes at higher clay content (a higher ΔE). The correlation among crystallization kinetics, melting behavior, and crystalline structure of nylon/clay nanocomposites is also discussed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2196–2204, 2004     

Allelochemical resistance of bald cypress,Taxodium distichum,heartwood to the subterranean termite,Coptotermes formosanus

The heartwood of bald cypress,Taxodium distichum (L.) Rich., resisted feeding attack by the Formosan subterranean termite,Coptotermes formosanus Shiraki. Hexane-extracted heartwood, however, was consumed at > 12 times the amount of sound heartwood eaten. A bioassay usingT. distichum sapwood as a feeding substrate was employed to assess the antitermitic activity of successive hexane, acetone, and methanol extracts of heartwood shavings and isolates derived from the active hexane extract. Two fractions, eluted from the crude hexane extract by liquid chromatography, significantly reduced termite feeding compared to the parent extract, while a third fraction was less active than the original hexane extract. Each fraction contained one major component. All three components were structurally related diterpenes. The two most active heartwood constituents were identified by GC-MS and NMR as ferruginol and manool, while the third and least active, but most prevalent, compound in heartwood was identified as nezukol. Results of bioassays suggest that these allelochemicals act principally as feeding deterrents with accompanying termite mortality due to starvation.     

Synthesis and characterization of a positive‐working,aqueous‐base‐developable photosensitive polyimide precursor

A positive‐working, aqueous‐base‐developable photosensitive polyimide precursor based on poly(amic ester)‐bearing phenolic hydroxyl groups and a diazonaphthoquinone photosensitive compound was developed. The poly(amic ester) was prepared from a direct polymerization of 2,2′‐bis‐(3‐amino‐4‐hydroxyphenyl)hexafluoropropane and bis(n‐butyl)ester of pyromellitic acid in the presence of phenylphosphonic dichloride as an activator. Subsequently, the thermal imidization of the poly(amic ester) precursor at 300°C produced the corresponding polyimide. The inherent viscosity of the precursor polymer was 0.23 dL/g. The cyclized polyimide showed a glass‐transition temperature at 356°C and a 5% weight loss at 474°C in nitrogen. The structures of the precursor polymer and the fully cyclized polymer were characterized by Fourier transform infrared spectroscopy and ¹H‐NMR. The photosensitive polyimide precursor containing 25 wt % diazonaphthoquinone photoactive compound showed a sensitivity of 150 mJ/cm² and a contrast of 1.65 in a 3 μm film with 1.25 wt % tetramethylammonium hydroxide developer. A pattern with a resolution of 10 μm was obtained from this composition. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 352–358, 2002     

On the oxidation kinetics and mechanisms of various SiC-coated carbon-carbon composites

SiC coatings on the surface of C-C were produced by either silicone resin impregnation/ pyrolysis or reaction sintering. Cycles of resin impregnation/pyrolysis produced an SiC coating, on the walls of fine open pores, which was effective in reducing the oxidation rate of C-C and in shifting the transition temperature to a higher value. Unless it is pre-coated with a pyrocarbon layer before sintering, plain reaction sintered SiC has oxidation behaviors similar to those of the above-mentioned SiC. The dense pyrocarbon film deposition on the surface of C-C could form a better SiC film than others. The carbon film homogenized the surface of C-C and a dense SiC film was established. The oxidation of the coated C-C can be modelled by a set of “oxidation resistors” in series and/or in parallel, with each resistor corresponding to an oxidation element. The controlling mechanism can be resolved from the activation energy. A combined resistant layer, consisting of resin impregnation, pyrocarbon film and reaction sintering SiC, showed the best oxidation resistance of any single-layer coated C-C composite.     

马氏体相变研究的进展和瞻望SCIEI

叙述马氏体相变研究的一些进展和瞻望,包括马氏体相变的定义,马氏体相变热力学,奥氏体状态对马氏体相变的影响,动力学,形核和长大,以及马氏体相变晶体学。     

Oxidation of Si-based ceramics in the presence of alkali halide vapors

Nonoxide silicon-based ceramics owe their oxidation resistance to the formation of a thin silica film that separates the ceramic from oxidizing environments. This silica film can be fluxed by alkali oxides to form low-melting alkali silicate corrosion products that do not provide protection. Alkali chlorides and other halides have sufficiently high vapor pressures that silica fluxing can occur without the formation of a condensed halide salt. The rates of oxidation of Si, SiC, and Si₃N₄ are influenced by the composition of gas mixtures containing these species.