Corrosion and mechanical behavior of fusion bonded epoxy (FBE) in aqueous media

In recent years there have been many reported cases of corrosion failure in cement concrete pipelines. In the majority of cases, the failures have been attributed to rebar corrosion which is caused by the permeability of chloride from low resistivity soil and subsequent attack on a passive layer on an iron bar in the structure. As a possible alternative to cementitious materials, some organic coatings based on olefin, vinyl or epoxy-based polymers have been considered. However, due to a paucity of data on the behavior of these coatings in aqueous media— particularly product water—the possibility of their application in water transmission systems in the Kingdom has not been fully exploited. This paper deals with the studies carried out on the corrosion and mechanical behavior of fusion bonded epoxy (FBE) coating on steel in aqueous media which include product water, distilled water and saline water. The mechanical testings on coating include adhesion, bending and cathodic disbondment testings. The corrosion studies include immersion testing under static and dynamic conditions, autoclave tests and accelerated (salt-fog) tests. The analysis of results indicates chemical inertness of FBE coating in either of the aforementioned water used during testing, good adhesion and no damage to the coating during bending. Cathodic disbondment tests indicate that FBE coating sustains under cathodic protection (CP) conditions. In general, the results of mechanical and corrosion tests indicate that FBE is a promising material for internal coating on steel in water transmission systems.     

Raman Spectroscopy of Nanocrystalline Ceria and Zirconia Thin Films

The results of Raman-scattering studies of nanocrystalline CeO₂ and ZrO₂:16% Y (YSZ) thin films are presented. The relationship between the lattice disorder and the form of the Raman spectra is discussed and correlated with the microstructure. It is shown that the Raman line shape results from phonon confinement and spatial correlation effects and yields information about the material nonstoichiometry level.     

Defect and Mixed Conductivity in Nanocrystalline Doped Cerium Oxide

The results obtained from a study on the microstructure and the electrical properties of Gd-doped CeO₂ thin films were reported. Dense, nanocrystalline films on sapphire substrates are prepared using a polymeric precursor spin coating technique. The electrical conductivity was studied as a function of temperature and oxygen activity and correlated with the grain size. For nanocrystalline Gd-doped CeO₂ thin films, the ionic conductivity increased with decreasing activation energy as the grain size decreased. A conductivity model was developed to analyze P _O2 behavior of the electrical conductivity. Using the conductivity model, the hopping energy of electron conduction and the enthalpy of oxygen vacancy formation were determined for different microstructures.     

Chemo-Enzymatic Synthesis and Antimicrobial Evaluation of Alkyloxy Propanol Amine-Based Cationic Ether Lipids

The present study involved the synthesis and antimicrobial evaluation of alkyloxy propanol amine-based cationic lipids N,N-dimethyl-1-octadecylamino-3-alkyloxy-2-propanol (series A, 7a–e) and N-methyl-N,N-di-(2-hydroxy-3-alkyloxy-2 propyl) octadecylamine (series B, 9a–e) and their acetylated derivatives (8a–e and 10a–e). A simple three-step chemo-enzymatic approach was employed for the synthesis of 7a–e and 9a–e in 71–80 and 67–88 % yields, respectively. The first step involved the synthesis of a series of glycidyl ethers from a series of alcohols (C₄, C₈, C₁₀, C₁₂, C₁₄) which were opened in the second step with octadecylamine to obtain 1-octadecylamino-3-alkyloxy-2 propanol (5a–e) and N,N-di-(2-hydroxy-3-alkyloxypropyl) octadecylamine (6a–e). In the third step, alkyloxy propanolamines (5a–e, 6a–e) were quaternized using methyl iodide to yield quaternized ammonium salts. The quaternized ammonium salts were enzymatically acetylated using Candida antarctica lipase-B based immobilized enzyme Novozym 435 to obtain their acetylated derivatives. The quaternized salts as well as their acetylated derivatives were evaluated for antibacterial and antifungal properties. The title compounds were found to possess moderate to good antibacterial activities against all the studied bacterial strains namely, Bacillus subtilis, Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa and Klebsiella aerogenes compared to streptomycin and cetyl trimethyl ammonium bromide (CTAB). The title compounds exhibited relatively good antifungal activities against Candida albicans and no significant activities against other fungal strains namely, Saccharomyces cerevisiae, Rhizopus oryzae and Aspergillus niger when compared to amphotericin B and CTAB.     

Structural Studies and Valence Band Splitting Parameters in Ordered Vacancy Compound AgGa7Se12

The threefold absorption in the fundamental absorption region of the ternary chalcopyrite AgGa₇Se₁₂, an ordered defect compound of AgGaSe₂, is analyzed to elucidate the three closely spaced band gaps in its valence band due to the lifting of degeneracy of the Γ₁₅ level. Hopfield’s quasi cubic model is employed to extract the crystal-field and spin–orbit splitting parameters and the linear hybridisation of orbitals model for evaluating the percentage contribution of Ag d-orbital and Ga and Se p-orbitals to the p–d hybridization of orbitals. The observed optical properties are correlated with the structural parameters like deformation parameter, anion displacement and anion–cation bond lengths that are deduced from X-ray diffraction data. The compound films for the studies are prepared by a modified form of Gunther’s three temperature technique and the compositional analysis was done by energy dispersive analysis of X-rays. X-ray photoelectron spectroscopy confirms the compound formation while atomic force microscopic technique was used for surface morphological analysis. The electrical resistivity of these n-type semi-conducting films is assessed to be ~5 Ωm and the films are found to be photosensitive.     

Numerical study of detonation waves in a monofuel-gas mixture in sharply expanding pipes

Mathematical simulation of the propagation mechanisms of combustion waves and heterogeneous detonation in sharply expanding pipes was performed using the equations of two-dimensional axisymmetric unsteady motion of a reacting mixture of a gas and monofuel particles. The influence of the main determining parameters of the gas-particle mixture and the pipeline on the propagation of nonstationary detonation waves was studied. Dependences of the critical ratio of the pipe diameters of the composite pipeline on the relative mass content of monofuel particles of different sizes are given.     

Physico-mechanical and degradation properties of biodegradable photografted coir fiber with acrylic monomers

Coir fibers were modified with 2-hydroxyethyl methacrylate (HEMA), methyl methacrylate (MMA) and 2-hydroxyethyl acrylate (2-HEA) solutions under UV radiation. Monomer concentration and radiation dose were optimized in terms of grafting and tensile properties. It was found that 20 % HEMA at 20th UV pass, 30 % MMA at 15th UV pass and 25 % 2-HEA at 20th UV pass of radiation produced higher tensile properties over untreated sample. Urea of different concentrations (0.5–2 %) were incorporated into optimized solutions and 1 % urea showed the best properties of the fiber. Water uptake behavior and simulating weathering degradation properties were also performed.     

Radiation-induced wood plastic composites under combinations of monomers

Radiation-induced wood plastic composites (WPC) were prepared from five varieties of Bangladeshi timbers, using seven different types of monomers. The mixtures of double and triple monomers were investigated along with the single-monomer system for the preparation of composites. Among the three systems, single-monomer process showed the highest polymer loading with butylmethacrylate (BMA). Tensile strength (TS) property, represented as T_f = TS_wpc/TS_wood was determined. Highest T_f values were achieved with the soft wood. The effects of dose and dose rate, monomer concentration, and swelling agent were also studied. Suitable total dose was found to be 3 Mrad at 0.8 Mrad/h, and methanol exhibited the best swelling ability for the woods at a ratio of 1 : 9 v/v in all the monomer investigated.     

Crosslinked epoxies: Network structure characterization and physical–mechanical properties

A homologous series of epoxy resins, based on the digylcidyl ether of bisphenol-A, were reacted with stoichiometric quantities of m-phenylenediamine (mPDA) to form networks with varying crosslink densities. Infrared spectroscopic analyses revealed that the networks were formed predominantly by the epoxy—amine addition reactions with little or no OH-etherification. The ultimate glass transition temperatures were inversely proportional to the epoxy chain mol wt, as predicted by a model based on the assumptions of additivity and redistributivity of free volume. The average mol wt between crosslinks, M?_c, determined from the dynamic mechanical shear moduli, agreed to within 15 to 18% with the values predicted by the reaction stoichiometry. The glassy-state modulus did not exhibit any M?_c dependence above room temperature, however, the modulus—temperature plot for all the networks exhibited a discontinuity near ?50°C with a steeper slope below ?50°C than above it. The change in slope occurred over the same temperature interval as the β-transition temperature of the networks. The discontinuity in the modulus—temperature plot can be attributed to the freezing of the localized motions of the molecular groups responsible for the β-transition. © 1992 John Wiley & Sons, Inc.