Feature integration across space, time, and orientation.

The perception of a visual target can be strongly influenced by flanking stimuli. In static displays, performance on the target improves when the distance to the flanking elements increases—presumably because feature pooling and integration vanishes with distance. Here, we studied feature integration with dynamic stimuli. We show that features of single elements presented within a continuous motion stream are integrated largely independent of spatial distance (and orientation). Hence, space-based models of feature integration cannot be extended to dynamic stimuli. We suggest that feature integration is guided by perceptual grouping operations that maintain the identity of perceptual objects over space and time. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Results of the Inner Electrode Modification on the ZaP Flow Z-Pinch

The ZaP Flow Z-Pinch is a basic plasma physics experiment that uses sheared flows to stabilize an otherwise unstable configuration. The inner electrode is replaced with a larger version (15 cm diameter presently versus 10 cm previously). The goal of this modification is to increase temperature through increased adiabatic compression and to allow greater flexibility of neutral-gas injection through a greater number of gas-puff valves. Results are presented regarding the effect of neutral-gas injection characteristics and charge voltage on pinch stability. Increasing capacitor bank voltage and mass of gas injected increases stability and proximity to the machine axis. A four-chord HeNe interferometer is used to determine density at z = 0 cm and total temperature using magnetic field information from the z = 0 azimuthal array of magnetic probes. Total temperatures of 100–150 eV and densities of 2–3 × 10²² m⁻³ are calculated; temperatures are consistent with measured electron and ion temperatures.     

Modeling for Various Design Options of a Canal System

Irrigated agriculture is backbone of economy in many countries worldwide, including Pakistan with its large irrigation system. Systemic Enhancements are periodically implemented to improve the performance of the system. In this paper the performance of canals has been investigated for various operations. Data regarding discharge of outlets and the canals was collected by field measurements. Crop-water requirements, bed slope of canals, cross-sectional details, longitudinal profile and outlet details, were obtained from the Irrigation Department. It was noticed that the performance of canals is not satisfactory under prevailing conditions. Different operational strategies for change of unlined to lined conditions, different discharge conditions and outlet dimensions were evaluated using CanalMan model. It was established through extensive research that the performance of the canals can be improved by lining and changing outlet dimensions. Modified dimensions of outlets for better performance were estimated by iterative method of optimization.     

A comparative study of tunable Ba1−x Sr x TiO3 thin film capacitors prepared by rf-sputtering and liquid-phase deposition

Abstract

Ba_1?x Sr _x TiO₃ thin film capacitors have been successfully prepared using rf-sputtering and a metal organic deposition (MOD) method. The structure, microstructure and composition of the BSTO films are presented. Films grown on lanthanum aluminate LAO(100) showed c-axis preferred growth orientation. Broad paraelectric-to-ferroelectric transitions were observed in films prepared by both methods. The tunability of the capacitance by means of an appplied electric field is examined using various capacitor geometries. A decrease in the capacitance exceeding 75% at 77 K was obtained from the MOD deposited films under an electric field strength of 0.3 MV/cm. On the other hand, the tunability of the capacitance in the rf-sputtered films ranged from 5 to 10% at 77 K and at 20 kV/cm, while it exceeds 50% in some films. The results are compared with the predictions of Devonshire's phenomenological theory.     

Assessment of potential bioenergy from coppice forests trough the integration of remote sensing and field surveys

A spatially explicit knowledge of forest resources is essential to support the sustainable use of wood as a fuel for producing energy (firewood).This paper describes the integrated use of remotely sensed data and sample based forest inventories to derive a biomass map for coppice forest, resulted estimated potential biomass available is contrasted with local domestic consumptions at the municipality level. The test was carried out in an environmentally and socially homogeneous district of Apennine Mountains (Alto Molise, south-central Italy) coupling multispectral high resolution Landsat 7 ETM+ satellite imagery and a local forest inventory trough the application of the non-parametric estimation procedure k-Nearest Neighbours (k-NN). Several forest management scenarios were applied in order to evaluate their impact on the potential availability of firewood from coppice forests.The paper introduces data and methods used and presents the achieved results both in terms of the accuracy of the biomass map produced by k-NN and of the relationship between the potential availability and demand for firewood.These results demonstrated that k-NN is able to estimate the biomass of coppice forest in the test area with an accuracy level comparable with recent similar application of k-NN carried out in Boreal regions (RMSE of 25.6%).The application of different forest management scenarios have a significant impact on local estimated firewood balance between potential supply from coppice forests and demand for domestic consumption, depending of the scenarios the net balance changed up to 84%.     

Processing and Development of Corrosion Resistance Surface-Active Thin Film Nanocellulose Composite Coatings for Mild Steel Protection

Protection of Metals and Physical Chemistry of Surfaces - Mild steels are applied in the construction of oil platforms and pipelines due to their ease of formability, machinability, good mechanical...     

Casting properties of ASTM A128 Gr. E1 steel modified with Mn-alloying and titanium ladle treatment

This work aims to produce a high manganese steel with more refined austenite grains and better wear resistance without sacrificing the toughness and tensile properties by Mn alloying and Ti ladle treatment in comparision to ASTM A128 Gr. E1 steel (1.0C-13Mn) that is mostly used in the mining industry. The 1.0C-17Mn-xTi alloys (x=0, 0.05 and 0.1, in wt.%) were prepared. A relationship was established between the microstructures and mechanical properties of the as-cast and solution annealed alloys. Increasing Ti content increases the stable Ti(CN) phase on and beside the grain boundaries and decreases up to 37% the austenite grain size of the as-cast alloy with 0.10wt.% Ti. Correspondingly, after solution annealed, optimized titanium content (0.05wt.%) results in significant improvements in wear resistance, hardness, elongation, yield and tensile strengths by 44%, 31%, 30%, 8% and 12%, respectively, except 9% decrease in impact toughness compared to ASTM A 128 Gr. E1 steel without modification. These results show that 1.0C-17Mn-0.05Ti alloy can be used for parts exposed to high load wear and applied in conditions where relatively high tensile properties with sufficent ductility is needed.

     

Confirmation of the Dominant Defect Mechanism in Amorphous In–Zn–O Through the Application of In Situ Brouwer Analysis

The dominant point defect mechanism of amorphous (a‐) indium zinc oxide (IZO) was probed through in situ electrical characterization of sputtered a‐IZO thin films in response to changes in oxygen partial pressure (pO) at 300C. The results yielded a power law dependence of conductivity (σ) versus pO of ～?1/6. This experimental method, known as Brouwer analysis, confirms doubly‐charged oxygen vacancies as the dominant defect species in a‐IZO. The success of this study suggests that Brouwer analysis is a viable method for studying the defect mechanisms of amorphous oxides.     

Effect of amphiphilic compatibilizers on the filler dispersion and properties of polyethylene—thermally reduced graphene nanocomposites

Compatibilizers of different chemical structures and specifications were used to enhance the filler exfoliation in nanocomposites of polyethylene and thermally reduced graphene prepared by melt mixing route. The mechanical performance of the compatibilized nanocomposites was observed to be better than PE/G nanocomposites due to enhanced extent of filler exfoliation and distribution. Highest increase of 45% in tensile modulus and 13% in peak stress was observed in the composites. Overall, from the mechanical, rheological, thermal, and calorimetric properties, the compatibilizers with best performance were ethylene acrylic acid (EAA) copolymer and chlorinated polyethylene (CPE25). Furthermore, the extent of filler exfoliation was observed to increase with increasing EAA content thus confirming positive interactions between EAA and thermally reduced graphene, though no specific chemical interactions could be detected. The composite properties were observed to reach maximum around 7.5 wt % EAA content, followed by reduced performance due to extensive matrix plasticization. The observed behaviors were a result of interplay of opposing factors like filler exfoliation due to compatibilizer addition and matrix plasticization due to its lower molecular weight, thus the observed optimum comaptibilizer amount was specific to the compatibilizer. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42484.