Determination of the relationship of pressure to process time in pneumatic forming of a round membrane in the superplastic condition

The deformation of a round membrane into a cylindrical matrix is considered. The relationship of pressure to time of the process of pneumatic forming in the superplastic condition is established. The results obtained are compared with known data. A conclusion is drawn on the applicability of the proposed approach for calculation of the production parameters of forming of axisymmetric parts in the superplastic condition.Translated from Problemy Prochnosti, No. 11, pp. 71–75, November, 1993.     

Evaporation induced self-assembly of zeolite A micropatterns due to the stick-slip dynamics of contact line

In this study, a new surfactant-solvent system was described for the preparation of periodic stripe patterns of zeolite A on solid substrates. The evaporation induced self-assembly of zeolite A particles was due to the stick-slip dynamics of the three-phase contact line of the colloid solutions in acetone containing 10% (v/v) poly(dimethylsiloxane) (PDMS) fluid (2 cst.). In order to investigate the possible effects of particle size and the particle concentration on the stick-slip dynamics, three types of zeolite A samples with different particle sizes (zeolite A-I: 250-500 nm, zeolite A-II: 100-250 nm and zeolite A-III: 0-100 nm) were utilized to prepare 0.007-0.06% (w/v) colloidal dispersions. Zeolite A micropatterns were self-assembled on the surface of glass, high density polyethylene (HDPE) and poly(tetrafluoroethylene) (PTFE) substrates, which were placed vertically inside the colloid solutions and held against the wall of the cylindrical vial during the evaporation of acetone. The stripe patterns of zeolite A particles were analyzed with field emission scanning electron microscope (FE-SEM) and optical microscope. The widths of microstripes and the distance between the stripes were found as 2-20 μm and 40-60 μm respectively depending on the particle concentration. By using the stick-slip dynamics of colloids, the linear micropatterns of zeolite A nanocrystals were prepared with low cost and low energy.     

Synthesis and applications of heterobifunctional poly(ethylene oxide) oligomers

Poly(ethylene oxide) (PEO) oligomers are employed extensively in pharmaceutical and biomedical arenas mainly due to their excellent physical and biological properties, including solubility in water and organic solvents, lack of toxicity, and absence of immunogenicity. PEO can be chemically modified and reacted with, or adsorbed onto, other molecules and surfaces. Sophisticated applications for PEO have increased the demand for PEO oligomers with tailored functionalities, and heterobifunctional PEOs are often needed. This review discusses the synthesis and applications of heterobifunctional PEO oligomers possessing amine, carboxylate, thiol, and maleimide functional groups.     

A 100-GOPS programmable processor for vehicle vision systems

New generations of automobiles will include driver assistance systems requiring powerful, low-cost processors to handle video/camera applications and to enable fast, convenient application development. Shrinking feature sizes on processors already in development will bring substantial increases in system speed and functionality.     

Correlation Between Structural and Optical Properties of Composite Polymer/Fullerene Films for Organic Solar Cells

We investigate thin poly(3‐hexylthiophene‐2,5‐diyl)/[6,6]‐phenyl C₆₁ butyric acid methyl ester (P3HT/PCBM) films, which are widely used as active layers in plastic solar cells. Their structural properties are studied by grazing‐incidence X‐ray diffraction (XRD). The size and the orientation of crystalline P3HT nanodomains within the films are determined. PCBM crystallites are not detected in thin films by XRD. Upon annealing, the P3HT crystallinity increases, leading to an increase in the optical absorption and spectral photocurrent in the low‐photon‐energy region. As a consequence, the efficiency of P3HT/PCBM solar cells is significantly increased. A direct relation between efficiency and P3HT crystallinity is demonstrated.     

An effect of side chain length on the solution structure of poly(9,9-dialkylfluorene)s in toluene

The effect of side chain length of π-conjugated poly(9,9-dialkylfluorene)s has been studied in semi-dilute (10 mg/mL) toluene solutions using small-angle neutron scattering (SANS) and ¹H and ²H NMR spectroscopies. Under these conditions, SANS data indicate that poly(9,9-dinonylfluorene) and poly(9,9-dioctylfluorene) are dissolved down to the molecule level and appear as elongated one-dimensional chains (length >20-30 nm). In contrast, the shorter side chain polymers exhibit a self-association so that poly(9,9-diheptylfluorene) forms thin sheet-like (∼1 nm) and poly(9,9-dihexylfluorene) thin (∼1 nm) and thick sheet-like (>6 nm) aggregates. ¹H NMR data, together with the density functional theory (DFT) calculations, however, show that this occurs without changes in the conformation of the polymer backbone.     

Notes on waves with negative phase velocity

Negative refraction is a wave phenomenon beyond geometrical optics - it depends on the way waves behave when their phase velocity reaches a zero. Various forms of linear wave processes in media can be concisely described in one wave equation that is inspired by the interpretation of a medium as an effective space-time geometry. Depending on the conformal factor of the effective metric, the waves may show positive or negative refraction. For electromagnetic waves in two-dimensional dielectrics the conformal factor corresponds to the impedance.     

A comparison between three simple crystallographic principles of precipitate morphology

The connection between the optimum shape and orientation relationship of precipitates in a solid is examined. Three simple criteria for precipitate morphology are compared and illustrated schematically: the principle that precipitate dimensions tend to be inverse to the magnitude of the transformation strain; the postulate that precipitates are bounded by unrotated planes (eigenplanes); and the proposal that interfaces are parallel to the planes of three independent dislocation loop arrays necessary to accommodate the transformation strain completely. These principles are illustrated for different orientation relationships, and it is shown that special features are displayed by invariant-line precipitates. The implications of these criteria for experimental studies of precipitate morphologies are discussed and their predictions compared with results from a recent study of lath-shaped precipitates in Cu-Cr alloys. This article is based on a presentation made at the Pacific Rim Conference on the “Roles of Shear and Diffusion in the Formation of Plate-Shaped Transformation Products,” held December 18-22, 1992, in Kona, Hawaii, under the auspices of ASM INTERNATIONAL’S Phase Transformations Committee.