Effects of castration on adrenergic, cholinergic and nonadrenergic, noncholinergic responses of isolated corpus cavernosum from rabbit

OBJECTIVE: To investigate the effects of castration and testosterone on the constricting effect of phenylephrine and endothelium-dependent and -independent relaxing effects of different agonists in the corpus cavernosum of male rabbits. MATERIALS AND METHODS: Twenty rabbits were castrated and 10 received testosterone replacement for 1 month after castration; 10 further rabbits underwent a sham operation and acted as controls. One month after operation the rabbits were killed and their penises excised. Strips of corpus cavernosum were used for isometric tension measurements in organ chambers; concentration-response relationships for phenylephrine, carbachol, adenosine and sodium nitroprusside were obtained by adding the reagent cumulatively to the bath. RESULTS: The phenylephrine-induced contractions were markedly lower, with no change in the pD2 values (i.e. the negative logarithm of the concentration for half-maximal response), in cavernosal strips obtained from castrated rabbits than in those from controls. Endothelium-dependent relaxation elicited by carbachol increased in the castrated group but the relaxation induced by sodium nitroprusside did not change and those elicited by adenosine were strongly depressed when compared with controls. There were no significant changes in the pD2 values of agonist-induced relaxation responses in all groups. The relaxation elicited by electrical-field stimulation at lower frequencies increased in strips from castrated rabbits but at higher frequencies were unchanged when compared with controls. Castration-induced changes in the relaxation response of cavernosal strips were significantly restored by in vivo testosterone replacement but those induced by phenylephrine were not. CONCLUSION: The lack of testosterone has an effect on the reactivity of the corpus cavernosum, indicating that testosterone has an important role in erectile function by a pre- or post-synaptic action on the corpus cavernosum.     

Enhanced Human Lysozyme Production by Kluyveromyces lactis

An attempt to enhance recombinant human lysozyme production by Kluyveromyces lactis K7 was performed in this study. In this study, the production of recombinant human lysozyme was investigated using shake flasks and bioreactor under different cultivation conditions. It was demonstrated that 25 °C could enhance human lysozyme production when compared with other temperatures tested. This study also demonstrated that higher biomass did not necessarily produce higher human lysozyme, and it was clear that human lysozyme production was enhanced under unfavorable conditions such as low acidity and oxygen limitation. Cultivation condition with no pH control demonstrated better production than with pH controlled near neutrality. Oxygen limitation also resulted in higher recombinant human lysozyme production. Overall human lysozyme was increased from 64.1 U/ml in flask to 123.6 U/ml in fed-batch fermentation using 4.5% (w/v) glucose initially and fed with concentrated lactose to achieve 9% lactose concentration.     

Feedstock optimization of in-vessel food waste composting systems for inactivation of pathogenic microorganisms

An optimum composting recipe was investigated to reduce pathogenic microorganisms in a forced-aerated in-vessel system (55 liters). The feedstocks used for in-vessel composting were food waste, cow manure, and bulking materials (wood shavings and mulch hay). A statistical extreme vertices mixture design method was used to design the composting experiments and analyze the collected data. Each mixture (nine total) was replicated randomly three times. Temperature was monitored as an indicator of the efficiency of the composting experiments. The maximum temperature values of the mixtures were used as a response for both extreme vertices mixture design and statistical analyses. Chemical changes (moisture content, carbon/nitrogen ratio, volatile solids, and pH) and reductions of indicator (fecal coliforms and fecal streptococci) and pathogenic microorganisms (Salmonella and Escherichia coli O157:H7) were measured by the most-probable-number method before and after a 12-day composting period. Maximum temperatures for the tested compost mixtures were in the range of 37.0 to 54.7 degrees C. Extreme vertices mixture design analysis of the surface plot suggested an optimum mixture containing 50% food waste, 40% manure, and 10% bulking agents. This optimum mixture achieved maximum temperatures of 54.7 to 56.6 degrees C for about 3.3 days. The total reduction of Salmonella and E. coli O157:H7 were 92.3%, whereas fecal coliforms and fecal streptococci reductions were lower (59.3 and 27.1%, respectively). Future study is neededto evaluate the extreme vertices mixture design method for optimization of large-scale composting.     

From Bifunctional Site to Metal–Proton Adduct Site in Alkane Reforming Reactions on Sulphated-Zirconia-Supported Pt or Pd or Ir Catalysts

Isomerization reactions of n-heptane, n-octane and n-nonane are studied on sulphated-zirconia-supported 0.2 wt% Pt, Pd or Ir catalysts. Evolutions of isomer selectivity versus total conversion and reaction temperatures are analysed. When total conversion (_T) is increased, isomer selectivity (%S _isom) is decreased and the slope of the curve %S _isom=f(_T) is more pronounced when the carbon number in the alkane is more important. At isoconversion, around 20%, below 473 K, cracking is favoured over isomerization reaction, and above 473 K it is the reverse. Moreover, with n-heptane, when the catalytic reaction occurred at 423 K and at low conversion, _T20%, we observed a large decrease in the isomer selectivity percentages on Pd/SZ and Ir/SZ compared to Pt/SZ. What is remarkable is that, at this low temperature, both metals are inactive in the carbon–carbon bond rupture. To explain these results the following points are raised: (i) an associative mechanism is proposed for the adsorption step of the alkane involving an agostic intermediate species where the carbon–hydrogen bonds act as ligands to the transition metal centres forming covalent C–HM systems, and (ii) a metal–proton adduct site, which gathers metallic and acidic sites is suggested. This approach seems to better explain our results than the traditional bifunctional mechanism.     

Direct liquid-feed fuel cells: Thermodynamic and environmental concerns

The present paper briefly reviews the different direct liquid-feed fuel cells that have been regarded through the open literature. It especially focuses on thermodynamic-energetic data and toxicological–ecological hazards of the chemicals used as liquid fuels. The analysis of those two databases shows that borohydride, ethanol and 2-propanol would be the most adequate liquid fuels for the polymer electrolyte membrane fuel cell-type systems, even if they are inferior to hydrogen. All the fuels and also all the by-products stem from their decomposition are more or less harmful towards health and environment. More particularly, hydrazine should be avoided because it and its by-product are very dangerous. It is to note that the present paper does not intend to review and to compare the performances of those fuel cells because of great differences in the efforts devoted to each of them.     

Inactivation of Staphylococcus aureus in milk using flow-through pulsed UV-light treatment system

ABSTRACT:  This study investigated the efficacy of pulsed UV-light for continuous-flow milk treatment for the inactivation of Staphylococcus aureus , a pathogenic microorganism frequently associated with milk safety concerns. Pulsed UV light is an emerging technology, which can be used for the inactivation of this pathogen in milk in a relatively short time. Pulsed UV light damages the DNA of the bacteria by forming thymine dimers that lead to bacterial death. The effect of sample distance from the quartz window of the UV-light source, number of passes, and flow rate was investigated. A response surface methodology was used for the design and analysis of experiments. Milk was treated at 5-, 8-, or 11-cm distance from a UV-light strobe at 20, 30, or 40 mL/min flow rate and treated up to 3 times by recirculation of milk to assess the effect of the number of passes on inactivation efficiency. Log₁₀ reductions varied from 0.55- to 7.26-log₁₀ CFU/mL. Complete inactivation was obtained in 2 cases and no growth was observed following an enrichment protocol. Predicted results were in agreement with the experimental data. Overall, this work demonstrates that pulsed UV-light has a potential for inactivation of milk pathogens.     

Study of adsorption characteristics of long chain alkyl amine and petroleum sulfonate on silicates by electrokinetic potential,microflotation, FTIR,and AFM analyses

The long-chain alkyl amines and petroleum sulfonates are mostly used to remove unwanted minerals from feldspar ores in acidic pHs. In this study, their adsorption characteristics on pure albite and quartz were investigated by electrokinetic potential measurements, microflotation tests, Fourier transform infrared spectroscopy, and atomic force microscopy studies. According to the results, amine had strong influence on zeta potentials of both albite and quartz turning them positive and resulting over 90% flotation recovery at certain pH values. Petroleum sulfonate, on the other hand, was less effective in terms of both zeta potential values and flotation recovery responses of albite. Although albite and quartz had different zeta potentials and flotation recovery responses with each collector, they displayed similar adsorption bands of CH₂ group over fingerprint region and adsorption layers with different intensities after being treated with the collectors. However, the adsorption of each collector on the minerals was altered by rinsing with acetone indicating that the interaction of the collectors with albite and quartz surfaces were mostly by Coulombic forces and hydrogen bonding.     

The Scale Effect of Roughness on Hydrodynamic Contact Friction

Multistage abrasive finishing processes (grinding, polishing, honing, etc.) are commonly used to produce the geometrical properties of a surface to meet its technical functionalities in the operating characteristics of contacting parts in friction, relating to their durability and reliability (running-in performance, wear resistance, load-carrying capacity, etc.). Coarse abrasive grits followed progressively finer ones are used, which leads to a multiscale stratified surface texture.

In this article, a numerical model of elastohydrodynamic (EHD) contact coupled to a multiscale surface texture model was developed that allows tracking the scale effect of surface features and their interactions on friction performance and lubricant flow under hydrodynamic lubrication conditions. Because the simulation model has as an input the surface topography and to overcome the variability in surface finish formation, textured surfaces at different stages of the finishing process were simulated (virtual texturing method). Surface topography can be decomposed into two principal components: superficial roughness and valleys. Superficial roughness was modeled using a fractal model and a scaling factor was introduced to model valley patterns. The results show the relationship between friction and surface scales.