Partial error tolerance for bit-plane FIR filter architecture

Whereas some applications require correct computation many others do not. A large domain where perfect functional performance is not always required is multimedia and DSP systems. Relaxing the requirement of 100% correctness for devices and interconnections may dramatically reduce costs of manufacturing, verification, and testing. The goal of this paper is to develop a method for trading computational correctness for an additional chip area involved by fault-tolerance implementation. The method is demonstrated for the BP array in the following way: only the most significant bits of the output word are made fault-tolerant. By introducing the concept of partially error-tolerant BP array, designers achieve one more degree of tradeoff freedom. Formal definitions of the proposed terms are given. A mathematical path based on transitive closure that generates an error significance map for the BP array is proposed. The design tradeoff is demonstrated through FPGA implementation. The achieved area savings are presented as a function of a number of most significant fault-tolerant bits.     

Model of quality management of hard coatings on ceramic cutting tools

For the development and introduction of new coated cutting tools (i.e. new combinations of cutting materials and hard coatings), it is necessary to carry out a number of studies with the purpose of optimizing the coatings composition and processing procedures, and also to test new tools under working conditions. The aim of this paper is to establish a common model for environmentally oriented quality management in the use and development of coated ceramic cutting tools with new coating systems. The paper also presents an investigation of the results of tribological and cutting properties of the coatings deposited with the PVD and CVD techniques on cutting inserts made from (Al₂O₃ + TiC) tool ceramics. Tests were carried out on ceramic inserts, uncoated and PVD or CVD-coated, with gradient, mono-, multi- (nano) layers and multicomponent hard wear resistant coatings composed of TiN, Ti(C, N), (Ti, Al)N, (Ti, AlSi)N and Al₂O₃ layers.     

Regression analysis, support vector machines, and Bayesian neural network approaches to modeling surface roughness in face milling

This study examines the influence of cutting speed, feed, and depth of cut on surface roughness in face milling process. Three different modeling methodologies, namely regression analysis (RA), support vector machines (SVM), and Bayesian neural network (BNN), have been applied to data experimentally determined by means of the design of experiment. The results obtained by the models have been compared. All three models have the relative prediction error below 8%. The best prediction of surface roughness shows BNN model with the average relative prediction error of 6.1%. The research has shown that, when the training dataset is small, both BNN and SVR modeling methodologies are comparable with RA methodology and, furthermore, they can even offer better results. Regarding the influence of the examined cutting parameters on the surface roughness, it has been shown that the feed has the largest affect on it and the depth of cut the least.     

Structural effects in electrocatalysis: oxidation of formaldehyde on gold and platinum single crystal electrodes in alkaline solution

The oxidation of formaldehyde in sodium hydroxide solution has been studied on platinum and gold single crystal electrodes with the (111), (110) and (100) orientations. There is apparently no structural sensitivity of this reaction, since minor differences have been found between the three low index faces. This is valid for both platinum and gold electrodes. The hydrogen adsorption on platinum and the AuOH formation on gold electrodes exhibit structural sensitivity in the same solution. Similar activity of platinum and gold electrodes is noteworthy. A weak adsorption of gem-diol, formed in the interaction of formaldehyde with H₂O or OH^? appears as the origin of the structural insensitivity of this reaction.     

The effect of Cl(I)− ions on kinetics and mechanism of anodic dissolution and cathodic deposition of copper

The influence of Cl(I)^? ions on kinetics and mechanism of anodic dissolution and cathodic deposition of copper in acidic sulfate was investigated. For this investigation the galvanostatic single-pulse method has been used. The results indicate that Cl(I)^? ions change the exchange current density and transfer coefficients as determined from tafel analyses of the anodic and cathodic reactions.     

Annealing effects of polymers and their underlying molecular mechanisms

This paper indicates that changes in chain mobility, heat capacity, WAXS crystallinity, SAXS long period, SAXS peak intensity, specific volume and morphology as a function of increasing temperature, occur in three fairly distinct annealing ranges (I, II and III) that are more or less the same for all crystallized polymers with a lamellar morphology. It is shown that none of the proposed molecular models to date, including the well-known fold surface premelting model, can satisfactorily account for all the experimental data. However, a new molecular interpretation, based primarily on electron microscopy and SAXS studies of changes such as lateral ‘melting’ from edges of microparacrystallites (mPC) within the lamellae seen at the annealing temperatures can account for the data. With our new molecular interpretation, the effect of temperature increase is established to result in a slight breakup of the laterally aligned mPC within the lamellae at low annealing temperatures in range I, and selective lateral ‘melting’ of the exposed mPC and recrystallization at higher annealing temperatures in ranges II and III, with the recrystallization being very limited in range III. Annealing effects seen in cold- or hot-drawn polymers with a fibrillar morphology can also be readily accounted for by this very general molecular mechanism occurring in the same annealing temperature ranges.     

Modelling of V–Hz and vector controlled ASDs in PSCAD/EMTDC for voltage sag studies

This paper deals with modelling and performance of adjustable speed drives (ASDs) subjected to voltage disturbances in electric supply. The aim of this study was to develop appropriate models of typical ASD and investigate their sensitivity to voltage disturbances under various practical modes of operation and control. Accordingly, scalar controlled open and closed loop volts–hertz (V–Hz) and vector controlled closed loop ASDs are modelled in PSCAD/EMTDC environment, and their performance in the presence of voltage disturbances is investigated under typical operating and loading conditions.     

Exponential approximation of the Heidler function for the reproduction of lightning current waveshapes

In this paper the lightning current function proposed by Heidler is approximated by a linear combination of exponential functions in the time domain, which is afterward analytically transformed into the frequency domain. The unknown coefficients of the exponential approximation for the most frequently used values of the current steepness factor are computed using the least squares method. The developed exponential approximation is general with respect to the current steepness factor in the Heidler function. Approximation of the Heidler function with a linear combination of exponential functions enables the approximation of various Heidler function based lightning current functions. Heidler function in the frequency domain can be used for transient analysis of electromagnetic phenomena that include lightning protection, grounding grid analysis and electromagnetic compatibility problems.     

Generalized charge simulation method for the calculation of the electric field in high voltage substations

This paper deals with the calculation of the electric field strength in high voltage (HV) substations comprising complex geometrical structures. Generalized charge simulation method is proposed for improving the precision of the calculation of the electric field strength. The objective of this analysis is to examine the influence of towers, HV apparatus and fences on the spatial electric field distribution. For this purpose, a three-dimensional generalized model of HV substation has been developed, including phase conductors, bypass busbars, HV apparatus, fences and towers (denoted as Full model). The obtained results of the calculation of the electric field strength are compared with the Simplified model, which only includes phase conductors connected to HV network. Verification of the proposed Full model performed by comparing the calculated and in-field measured values of the electric field strength within HV substations and in their vicinity gives very promising results.