GridCertLib: A Single Sign-on Solution for Grid Web Applications and Portals

This paper describes the design and implementation of GridCertLib, a Java library leveraging a Shibboleth-based authentication infrastructure and the SLCS online certificate signing service, to provide short-lived X.509 certificates and Grid proxies. The main use case envisioned for GridCertLib, is to provide seamless and secure access to Grid X.509 certificates and proxies in web applications and portals: when a user logs in to the portal using SAML-based Shibboleth authentication, GridCertLib uses the SAML assertion to obtain a Grid X.509 certificate from the SLCS service and generate a VOMS proxy from it. We give an overview of the architecture of GridCertLib and briefly describe its programming model. Its application to some deployment scenarios is outlined, as well as a report on practical experience integrating GridCertLib into portals for Bioinformatics and Computational Chemistry applications, based on the popular P-GRADE and Django softwares.     

Hybrid Nanoparticle–Polymer Brush Composites for Detection of Low‐Level Radiostrontium in Water

Combining extraction and scintillation properties within the same material is a relatively new approach in development of sensors for detection of radioactive elements. Structural organization of such materials at a nanoscale typically offers higher efficiency of detection and shorter response time. In this contribution, several new protocols are discussed for fabrication of stable extractive scintillating systems based on commercial Superlig 620 (SL) material with high affinity to radiostrontium. Application of hybrid organic–inorganic beads with SL particles used as core and halloysite clay nanotubes (HNT) modified with a polyvinyltoluene (PVT) brush as a permeable shell combines high‐performance extracting properties of the SL material with efficient light emission properties of the polymer scintillator. The developed SL–HNT–PVT hybrid extractive scintillating material allows real‐time detection of low‐level concentrations of radiostrontium in water. Moreover, the suggested approach is not limited to detection of Sr but can find broader application in development of chemical, biological, or radioluminescent sensors and multifunctional materials.     

Synthesis and characterization of polyaniline derivative and silver nanoparticle composites

BACKGROUND: There has been a recent surge of interest in the synthesis and applications of electroactive polymers with incorporated metal nanoparticles. These hybrid systems are expected to display synergistic properties between the conjugated polymers and the metal nanoparticles, making them potential candidates for applications in sensors and electronic devices. RESULTS: Composites of polyaniline derivatives—polyaniline, poly(2,5‐dimethoxyaniline) and poly(aniline‐2,5‐dimethoxyaniline)—and silver nanoparticles were prepared through simultaneous polymerization of aniline derivative and reduction of AgNO₃ in the presence of poly(styrene sulfonic acid) (PSS). We used AgNO₃ as one of the initial components (1) to form the silver nanoparticles and (2) as an oxidizing agent for initiation of the polymerization reaction. UV‐visible spectra of the synthesized nanocomposites reveal the synchronized formation of silver nanoparticles and polymer matrix. The morphology of the silver nanoparticles and degree of their dispersion in the nanocomposites were characterized by transmission electron microscopy. Thermogravimetric analysis and differential scanning calorimetry results indicate an enhancement of the thermal stability of the nanocomposites compared to the pure polymers. The electrical conductivity of the nanocomposites is in the range 10^?4 to 10^?2 S cm^?1. CONCLUSION: A single‐step process for the synthesis of silver nanoparticle–polyaniline derivative nanocomposites doped with PSS has been demonstrated. The approach in which silver nanoparticles are formed simultaneously during the polymerization process results in a good dispersion of the nanoparticles in the conductive polymer matrix. Copyright © 2008 Society of Chemical Industry     

Evaluation of three-dimensional and two-dimensional full displacement fields of a single edge notch fracture mechanics specimen, in light of experimental data using X-ray tomography

The aim of this study is to show the validity of a 3D numerical approach and the 2D theoretical approaches from 3D experimental results on a single edge notch cracked specimen loaded in mode I. The three displacement components all over the volume were measured by means of Digital Volume Correlation coupled with X-ray computed tomography. The numerical approach and the experimental one give similar results with differences equivalent to the accuracy of the method of measurements. The theoretical approach provides higher results and is not relevant to experimental results, but this approach allows an evaluation of the 3D effect zone.     

Compact cooler for electronics on the basis of a pulsating heat pipe

The paper presents the results of developing and investigating a compact cooler for electronics made on the basis of a closed loop pulsating heat pipe (CLPHP). The cooler is made of a copper tube 5.6 m long with OD of 2 mm and ID of 1.2 mm in the form a 3D spiral containing 17 turns. The device is equipped with a light copper radiator with a finning area of 1670 cm², which was blown by an axial fan located inside the spiral. The thermal interface of the cooler situated in the heating zone is made of a copper plate with a thermocontact surface measuring 40 × 35 mm, which was in thermal contact with all the turns of the device. The cooler overall dimensions are 105 × 100 × 60 mm, its mass is 350 g.The operation of the cooler has been investigated with water, methanol and R141b as working fluids at a uniform and concentrated supply of a heat load in different heating modes. A reliable operation of the device has been demonstrated in the range of heat loads from 5 to 250 W. A minimum thermal resistance “heat source–ambient air” equal to 0.32 °C/W was attained with water and methanol as working fluids at a uniform heat load of 250 W. With a heat load concentrated on a section of the thermal interface limited by an area of 1 cm², a minimum value of thermal resistance equal to 0.62 °C/W was attained at a heat load of 125 W when methanol was used as a working fluid.     

Antioxidant and antimicrobial activities of essential oil and various oleoresins of Elettaria cardamomum (seeds and pods)

BACKGROUND: This paper describes the chemical analysis of the essential oil and various oleoresins of Elettaria cardamomum (seeds and pods) by gas chromatography (GC) and gas chromatography/mass spectrometry (GC/MS) techniques. It also compares the effects of the different extraction solvents used (chloroform, methanol, ethanol and diethyl ether) on the antioxidant and antimicrobial activities of the essential oil and oleoresins. RESULTS: The essential oil was found to contain 71 compounds. The major components were α‐terpinyl acetate (44.3%), 1,8‐cineole (10.7%), α‐terpineol (9.8%) and linalool (8.6%). The chloroform and methanol oleoresins both contained α‐terpinyl acetate (21.8 and 25.9% respectively) as the main component, while 5‐hydroxymethylfurfural (28.9%) was the most abundant compound in the ethanol oleoresin. However, very few components (total 0.61%) were found in the diethyl ether oleoresin. The antioxidant activities of the essential oil and oleoresins, studied in mustard oil by monitoring the peroxide value of the oil substrate, were comparable to those of the synthetic antioxidants butylated hydroxyanisole (BHA) and butylated hydroxytoluene (BHT) at 0.02% concentration. The essential oil exhibited strong antibacterial activity against the micro‐organisms Staphylococcus aureus, Bacillus cereus, Escherichia coli and Salmonella typhi at 3000 ppm by the agar well diffusion method. Antifungal activity was tested against the food‐borne fungi Aspergillus terreus, Penicillium purpurogenum, Fusarium graminearum and Penicillium madriti. The methanol and ethanol oleoresins gave the best results against A. terreus at 3000 ppm by the poison food method. CONCLUSION: This study provides important information about the chemistry and antioxidant and antimicrobial properties of E. cardamomum. Copyright © 2007 Society of Chemical Industry     

Thermal neutron imaging with rare-earth-ion-doped LiCaAlF6 scintillators and a sealed Cf source

Thermal neutron imaging with Ce-doped LiCaAlF₆ crystals has been performed. The prototype of the neutron imager using a Ce-doped LiCaAlF₆ scintillating crystal and a position sensitive photomultiplier tube (PSPMT) which had 64 multi-channel anode was developed. The Ce-doped LiCaAlF₆ single crystal was grown by the Czochralski method. A plate with dimensions of a diameter of 50×2 mm² was cut from the grown crystal, polished, and optically coupled to PSPMT by silicone grease. The ²⁵²Cf source (<1 MBq) was sealed with 43 mm of polyethylene for neutron thermalization. Alphabet-shaped Cd pieces with a thickness of 2 mm were used as a mask for the thermal neutrons. After corrections for the pedestals and gain of each pixel, we successfully obtained two-dimensional neutron images using Ce-doped LiCaAlF₆.     

Thermoelastic behavior of carbon fiber/polycarbonate model composites

Model composites of polycarbonate (PC) containing single, multiple and chopped carbon fibers (CF) with and without and epoxy sizing were prepared by hot pressing. The thermoelastic behavior of model CF/PC composites was characterized by stretching calorimetry at room temperature. For small strains ? (i.e., ? ≈ 0.01) the specific mechanical work, specific heat effects and specific internal energy changes ΔU were completely reversible in stretching/contraction cycles and quantitatively obeyed the standard relationships for elastic solids. Young's moduli E and ΔU were significantly higher, whereas the linear thermal expansivities α_L were lower for model CF/PC composites compared to those for the neat PC. Smaller values of the above parameters for composites reinforced with sized CF suggested weaker CF/PC interfacial interactions. Current theoretical models of thermoelastic properties of composite materials suggest the existence of unusually stiff, highly oriented PC structures in fairly thick boundary layers around CF. The onset of inelastic deformation, as well as mechanical failure in CF/PC model composites at significantly smaller strains compared to the neat PC were tentatively explained by the yield and subsequent plastic flow of the matrix polymer initiated by heat effects of fiber fragmentation processes, and by higher concentration of microvoids generated in fiber fragmentation/debonding events, respectively.