A Mathematical Approach in the Design of Arterial Bypass Using Unsteady Stokes Equations

In this paper we present an approach for the study of Aorto-Coronaric bypass anastomoses configurations using unsteady Stokes equations. The theory of optimal control based on adjoint formulation is applied in order to optimize the shape of the zone of the incoming branch of the bypass (the toe) into the coronary according to several optimality criteria.Dedicated to David Gottlieb on the occasion of his 60th birthdayValery Agoshkov: This work has been prepared when the first author was a visiting professor at Institut d’Analyse et Calcul Scientifique of the école Polytechnique Fédérale de Lausanne     

Porous silicon in solar cell structures: a review of achievements and modern directions of further use

Porous silicon, which is being obtained by electrochemical etching of silicon wafers in electrolytes on the base of hydrofluoric acid, recently attracted the attention of specialists in photovoltaics even more due to a number of its unique properties. However, at present, acceptable results are obtained for the use of porous silicon as antireflecting coating for silicon solar cells only. In the present paper, previous experience of the use of por-Si in the silicon solar cells has been reviewed. On the base of examination of the porous silicon properties, a number of new directions of improvement of photoconversion efficiency of structures with optimized layers of porous silicon are proposed. The results of numerical calculations carried confirm perspectiveness of use of porous silicon for efficiency improvement for different types of silicon solar cells. These can be increased of their internal quantum efficiency, expansions of operating spectral range toward ultra-violet and infrared spectrum range, decrease of losses of photogenerated power due to the influence of bulk and surface recombination.     

Fast reactions with nano- and micrometer aluminum: A study on oxidation versus fluorination

The use of fluorine as an oxidizing agent in aluminum (Al)-based thermite reactions yields higher peak pressures and an increase in gas production compared with oxygen-containing oxidizers, such as molybdenum trioxide (MoO₃). Thus fluorination reactions have the potential to excel in situations that require high pressures and flame speeds. This study compares the combustion behaviors of Al/Teflon, Al/MoO₃/Teflon, and Al/MoO₃ in an effort to determine the effects that the replacement of oxygen with fluorine has on the reaction dynamics in both open and confined burning configurations. Data were collected from pressure sensors and high-speed imaging. The mass percent of Al was varied from 10 to 90% to study the effects of composition. The composites were then further tested at the optimum stoichiometry using either 50 nm or 1-3 μm Al to examine the effect of Al particle size. The addition of Teflon in an open configuration hinders the reaction due to a loss of liberated gas. Confining the reaction enables the trapped gases to enhance convection, yielding increased flame speeds. For confined conditions, the reactions containing Teflon exhibit higher peak pressures but lower flame speeds than the reactions with MoO₃. These results imply that a direct relationship between generated gas pressures and flame speeds does not generally exist when comparing different oxidizers. The theoretically predicted relationship for the relative flame speed versus relative particle size based on the melt-dispersion mechanism agrees with experimental data for all Al particle sizes and for the fluorination reaction. Particle synthesis parameters are suggested that could be controlled to enable micrometer-scale Al particles to achieve the performance of nanoscale Al particles. This is of significant practical importance, because nanoparticles are 30 to 50 times more expensive than the micrometer particles.     

Radiation intensity from ultrarelativistic particles during axial channeling and its orientation dependence

The radiation intensity I of ultrarelativistic electrons and positrons during axial channeling in thin crystals is calculated using a realistic model for the axial potential. The approach used avoids a cumbersome analysis of radiation from concrete trajectories. A general expression for the intensity I(?_o) as a function of the incident angle ?_o of the particles, which is valid for any ax potential U(ρ), is derived. Explicit formulas for the potential [eq. (29)] are given. Intensities I(?_o) for axial and planar chann compared.     

Effect of metal oxides added onto polyvinyl alcohol via pulsed underwater plasma on their thermal,electrical and dielectric properties

Flexible electronics require materials with high breakdown strength, high dielectric constant, and thermal stability. These conditions are met by composites based on polymers and metal oxides. In this article, we present a new one-step method for producing composites based on water-soluble polyvinyl alcohol (PVA) and metal oxides (AlOOH, CuO, and ZnO). The source of oxides is underwater plasma. The oxides are introduced into the polymer matrix when plasma is exposed to the polymer solution. The results of X-ray, IR, and SEM analysis showed that metal oxides are embedded in the polymer. Differential scanning calorimetry measurements have shown that the glass transition temperature depends on the oxide being incorporated. The electrical properties of polymer composites were studied by current–voltage characteristics. Dielectric properties were measured in the range of 25–10⁶ Hz. The properties of obtained PVA + metal oxide showed that using underwater plasma is a suitable method for producing composites for electronic devices.     

New Insights into the Structure of Kappa/Beta-Carrageenan: A Novel Potential Inhibitor of HIV-1

New insights into the structure of the hybrid κ/β-carrageenan (κ/β-CRG) of the red alga Tichocarpus crinitus have been obtained. Carrageenan oligosaccharides were prepared through the chemical and enzymatic depolymerization of κ/β-CRG with κ-carrageenase and its the enzyme-resistant fraction. The composition and distribution of the repetition units of κ/β- CRG were investigated by using the negative ion tandem MALDI-TOFMS and ESIMS method, which made it possible to prove and characterize the hybrid structure of this polysaccharide. An analysis revealed the blockwise distribution of the long β-blocks along the polysaccharide chain, with the inclusion of κ/β, μ/ν-blocks and some ι-blocks. Furthermore, the desulfated κ/β-CRG was shown to contain of –G–D– repeating units up to 3.5 kDa. Previous studies have demonstrated that CRGs suppress the replication of several viruses. Here, we established that κ/β-CRG and its oligosaccharides significantly inhibit the transduction efficiency of replication-defective lentiviral particles pseudotyped with the envelope proteins of three different viruses. We found that the polysaccharide and its oligosaccharides strongly reduced the transduction efficiency of lentiviral particles pseudotyped with GP160—the envelope protein of the human immunodeficiency virus HIV-1—when added to T-lymphocyte Jurkat cells. The CRG oligosaccharides displayed significantly higher antiviral activity.     

Promising Antifungal and Antibacterial Agents Based on 5-Aryl-2,2′-bipyridines and Their Heteroligand Salicylate Metal Complexes: Synthesis,Bioevaluation, Molecular Docking

A series of new 5-aryl-2,2′-bipyridines and their (polyfluoro)salicylate complexes of Cu(II), Co(II) and Mn(II) were synthesized. Their antimicrobial activity was evaluated in vitro against six strains of Trichophytons, E. floccosum, M. canis, C. ablicans and Gram-negative bacteria N. gonorrhoeae. Among azo-ligands, Ph-bipy and Tol-bipy showed promising antifungal activity (minimum inhibitory concentration (MIC)<0.8–27 μM). Their antifungal action was found can be realized via binding Fe(III) ions. Tol-bipy suppressed growth of Gram-positive bacteria S. aureus, S. aureus MRSA and their monospecies biofilms (MIC 6–16 μM). Using molecular docking, the anti-staphylococcal action mechanism based on the inhibition of S. aureus DNA gyrase GyrB was proposed for the lead compounds. Among metal complexes, Cu(II) and Mn(II) complexes based on tetrafluorosalicylic acid and Tol-bipy or Ph-bipy had the high antifungal activity (MIC<0.24–32 μM). Mn(SalF₄−2H)₂(Tol-bipy)₂] suppressed the growth of seven Candida strains at MIC 12–24 μM. [Cu(Sal−2H)(Ph-bipy)] and [Cu(SalF₃−2H)(Ph-bipy)₂] showed the promising anti-gonorrhoeae activity (MIC 4.2–5.2 μM). (Cu(SalF_n−2H)(Tol-bipy)₂], [Cu(SalF₄−2H)(Ph-bipy)₂] and [Cu(SalF₃−2H)(Ph-bipy)₂]) were found active against the bacteria of S. aureus, S. aureus MRSA and their biofilms (MIC 2.4–41.4 μM). The most active compounds were tested for toxicity in vitro against human embryonic kidney (HEK-293) cells and in vivo experiments with CD-1 mice.     

Astonishing diversity of natural surfactants: 5. Biologically active glycosides of aromatic metabolites

This review article presents 342 aromatic glycosides, isolated from and identified in plants and microorganisms, that demonstrate different biological activities. They are of great interest, especially for the medicinal and/or pharmaceutical industries. These biologically active natural sufactants are good prospects for the future chemical preparation of compounds useful as antioxidant, anticancer, antimicrobial, and antibacterial agents. These glycosidic compounds have been classified into several groups, including simple aromatic compounds, stilbenes, phenylethanoids, phenylpropanoids, naphthalene derivatives, and anthracene derivatives. For the previous article in this series, see Reference 1.