An in-vitro method for prediction of the digestible crude protein content in pig feeds

An in-vitro method using commercially available enzymes for the prediction of the in-vivo digestible crude protein content was developed and tested on seven feedstuffs and 16 diets for pigs. Fat-extracted feed samples were consecutively incubated with pepsin at pH 1 and pancreatin at pH 6.8. From the nitrogen content of the feed sample and of the residue after incubation the in-vitro digestibility of the crude protein was calculated. Using the linear regression of in-vitro on in-vivo digestible crude protein of samples obtained in feeding trials, the in-vivo digestible crude protein content (DXP_p) in g kg^?1 dry matter could be predicted. For feedstuffs and diets the correlation was 0.99 and 0.95 and the residual standard deviation 17 and 6 g kg^?1 dry matter, respectively. In a similar procedure the nitrogen solubilised during incubation with enzymes was analysed. The regression value was similar to that of the original procedure. However, this procedure was abandoned because it was more laborious.     

Smoothing Streams in an In-Home Digital Network: Optimization of Bus and Buffer Usage

In an in-home digital network it may be expected that several data streams (audio, video) run simultaneously over a shared communication device, e.g., a bus. The burstiness of a data stream can be reduced by buffering data at the sending and receiving side, thereby allowing a lower bus share allocation for the stream. In this paper we present an algorithm that determines how much of the bus capacity and buffer space should be allocated to each stream, in order to have a feasible transmission schedule for each stream. Furthermore, the algorithm determines a transmission schedule for each stream, indicating how much data is transmitted over time. We show how this multiple-stream problem can be solved by repeatedly solving single-stream problems. We present efficient algorithms to solve these single-stream problems. Furthermore, we present some experimental results. This revised version was published online in September 2006 with corrections to the Cover Date.     

Finite element analysis of electromagnetic scattering from a cavity

A finite element method (FEM) is implemented to compute the radar cross section of a two-dimensional (2D) cavity embedded in an infinite ground plane. The method is based on the variational formulation which uses the Fourier transform to couple the fields outside the cavity and those inside the cavity; hence, the scattering problem can be reduced to a bounded domain. The convergence of the discrete finite element problem is analyzed. Numerical results are presented and compared with those obtained by the standard finite element-Green function method and by the 2D integral equation method.     

Pin&Play: the surface as network medium

Integrating appliances in the home through a wired network often proves to be impractical: routing cables is usually difficult, changing the network structure afterward even more so, and portable devices can only be connected at fixed connection points. Wireless networks are not the answer either: batteries have to be regularly replaced or changed, and what they add to the device's size and weight might be disproportionate for smaller appliances. In Pin&Play, we explore a design space in between typical wired and wireless networks, investigating the use of surfaces to network objects that are attached to it. This article gives an overview of the network model, and describes functioning prototypes that were built as a proof of concept.     

Numerical modeling of electrostatic discharge generators

The discharge current and the transient fields of an electrostatic discharge (ESD) generator in the contact mode are numerically simulated using the finite-difference time-domain method. At first the static field is established. Then the conductivity of the relay contact is changed, which initiates the discharge process. The simulated data are used to study the effect of design choices on the current and fields. They are compared to measured field and current data using a multidecade broadband field and current sensors. The model allows accurate prediction of the fields and currents of ESD generators, thus it can be used to evaluate different design choices.     

General expression for pdf of a sum of independent exponential random variables

In order to evaluate exactly the performance of some diversity schemes, the probability density function (pdf) of a sum of independent exponential random variables (r.v.'s) must be known. This paper proposes a simple method to find it by using characteristic function., The resultant pdf is successfully applied to formulate the closed-form BER expression of 2 Tx-J Rx transmit diversity as well as the outage probability of repetition coding.     

Linearized microring-loaded Mach-Zehnder modulator with RF gain

A linearized modulator based on the Mach-Zehnder interferometer (MZI) loaded with a second-order allpass microring resonator is proposed and analyzed. The device is shown to exhibit much smaller intermodulation distortion than standard Mach-Zehnder modulators, thus greatly enhancing the device dynamic range. Gain effect associated with the microring resonance results in a modulator transfer function with high slope efficiency and large RF gain. Moreover, combined with the use of a highly electrooptic polymer, the high slope efficiency allows for the possibility of realizing modulators with subvolt drive voltage. The detrimental effect of loss in the microring resonators on device performance is also investigated and a design approach to mitigate its effect is presented. The proposed modulator can be linearized to any arbitrary nth order by loading the MZI with a higher order allpass microring resonator.     

Municipalities as a Driver for Wireless Broadband Access

Municipalities can form a driving force behind the deployment of new telecom infrastructure. While a telecom operator focuses on direct (financial) profits, a municipality is mainly interested in the social benefits for its inhabitants. In this paper, we evaluate a wireless municipality network from both a technical and an economic point of view. WiFi and WiMAX are considered as the most suited technologies for this purpose. A detailed techno-economic study has been performed including forecasting of the user adoption, dimensioning of the wireless network and modelling the related costs and revenues. The trade-off between installing a high number of relatively cheap WiFi access points, and a smaller number of more expensive WiMAX base stations for delivering full coverage is investigated in several scenarios.

Use of Deeply Integrated GPS/INS Architecture and Laser Scanners for the Identification of Multipath Reflections in Urban Environments

This paper investigates the constructive use of multipath reflections of Global Positioning System (GPS) signals for navigation in urban environments. Urban navigation applications are generally characterized by a significant presence of multipath signals. In order to maintain reliable and accurate navigation capabilities, it is critical to distinguish between direct signal and multipath. At the same time, multipath reflections can be exploited as additional measurements for those cases where the number of direct path satellites is insufficient to compute the navigation solution. The paper develops a method for the identification of multipath reflections in received satellite signals: i.e., multipath is separated from direct signal and a line-of-site between the GPS receiver and a multipath reflecting object is determined. Once multipath reflections are identified, they can be used constructively for navigation. The method presented in the paper exploits an open-loop batch-processing GPS receiver, laser scanner and inertial navigation system (INS) to identify multipath reflections in received satellite signals. Experimental GPS, inertial and laser scanner data collected in real urban environments are applied to demonstrate identification of multipath reflections.     

Cost-Effective Triple-Mode Reconfigurable Pipeline FFT/IFFT/2-D DCT Processor

This investigation proposes a novel radix-4² algorithm with the low computational complexity of a radix-16 algorithm but the lower hardware requirement of a radix-4 algorithm. The proposed pipeline radix-4² single delay feedback path (R4²SDF) architecture adopts a multiplierless radix-4 butterfly structure, based on the specific linear mapping of common factor algorithm (CFA), to support both 256-point fast Fourier transform/inverse fast Fourier transform (FFT/IFFT) and 8times8 2D discrete cosine transform (DCT) modes following with the high efficient feedback shift registers architecture. The segment shift register (SSR) and overturn shift register (OSR) structure are adopted to minimize the register cost for the input re-ordering and post computation operations in the 8times8 2D DCT mode, respectively. Moreover, the retrenched constant multiplier and eight-folded complex multiplier structures are adopted to decrease the multiplier cost and the coefficient ROM size with the complex conjugate symmetry rule and subexpression elimination technology. To further decrease the chip cost, a finite wordlength analysis is provided to indicate that the proposed architecture only requires a 13-bit internal wordlength to achieve 40-dB signal-to-noise ratio (SNR) performance in 256-point FFT/IFFT modes and high digital video (DV) compression quality in 8 times 8 2D DCT mode. The comprehensive comparison results indicate that the proposed cost effective reconfigurable design has the smallest hardware requirement and largest hardware utilization among the tested architectures for the FFT/IFFT computation, and thus has the highest cost efficiency. The derivation and chip implementation results show that the proposed pipeline 256-point FFT/IFFT/2D DCT triple-mode chip consumes 22.37 mW at 100 MHz at 1.2-V supply voltage in TSMC 0.13-mum CMOS process, which is very appropriate for the RSoCs IP of next-generation handheld devices.