Band-gap tuning of pendant polymers for organic light-emitting devices and photovoltaic applications

The preparation of a series of novel polymers comprising pendant electro-active “push–pull” chromophores and their performance in solution-processed organic electronic devices is described. The design of the electro-active pendant chromophores was based on the well-known motif of cyano-substituted poly(p-phenylenevinylene). Optical band-gap engineering within this series of polymers was achieved by varying the conjugation length and the electron donor/acceptor functionalities of the pendant chromophores. The introduction of a cyanoimine group into the electro-active pendant module resulted in a marked narrowing of the optical band-gap compared with the other electro-active pendant chromophores investigated in this work. Bulk heterojunction solar cell devices comprising these polymers were prepared by solution processing blends of each polymer with [6,6]-phenyl-C₆₁-butyric acid methyl ester, and their performance was evaluated by measuring power conversion efficiencies. The best-performing solar cell in this series exhibited a power conversion efficiency of 0.29% and a maximum incident photon-to-current conversion efficiency of 22% and was produced using the polymer in which the electro-active chromophore comprised the cyanoimine group.     

Chemical investigation and antimicrobial properties of mastic water and its major constituents

Mastic water is a commercial flavouring obtained during the steam distillation of mastic resin (the resin of Pistacia lentiscus var. chia) for the production of mastic oil. The mastic water extracts were analysed by GC−MS. The major compounds identified were verbenone, α-terpineol, linalool and trans-pinocarveol. Overall the composition was found to be very different from that of mastic oil. Additional GC−MS revealed the enantiomeric ratio of the chiral constituents of mastic water. The antimicrobial activity of mastic water extract, as well as that of its major constituents, was examined against Escherichia coli, Staphylococcus aureus and Candida spp. including ATCC wild clinical and food-borne strains. Linalool and α-terpineol were found to be the most potent antimicrobial constituents. Finally the stability of mastic water at different temperatures was studied, showing no change in the GC−MS profile of the organic extract for a period of 4 months at storage temperatures up to 4 °C.     

Effects of soluble surfactants on the Langmuir monolayers compressibility: A comparative study using interfacial isotherms and fluorescence microscopy

Langmuir monolayer isotherms and fluorescence microscopy (FM) techniques have been used to study the effect of two soluble surfactants on the methyl octadecanoate monolayer's compressibility at the air/water interface. The combination of these two techniques allows one to bridge the mechanical and morphological properties of the monolayer at different surfactant subphase concentrations. Our results show that the presence of sodium dodecyl sulfate (SDS) or dodecyltrimethylammonium bromide (DTAB) affects the monolayer elasticity differently. In addition, the outcome of this study emphasizes the role of the cationic and anionic surfactants on the monolayer compressibility. In fact, their effect was found to be primly depending on the monolayer thermodynamic situation. The isotherms of the monolayers at different surfactant concentrations underneath the monolayer preserve the characteristics behavior of the monolayer as imaged by FM. The calculated monolayer compressibility shows two different trends depending on the monolayer pressure and the surfactant type. A decreasing compressibility as a function of SDS concentration was found at pressure π = 5 mN/m, while no noticeable effect was found due to DTAB. At π = 10 mN/m both surfactants convert the monolayer from rigid to soft monolayer. Such characteristic behavior of the monolayer has been confirmed by FM.     

Target Costing für Werkstoffe – Potenziale und Methodik

Target Costing for Materials – Potentialities and Methodology Target Costing is a standard instrument of cost management in business administration, but hardly mentioned in the economic oriented literature on material sciences. Nevertheless there are high potentialities for developers, producers, or users of materials regarding the improvement of efficiency. Therefore, this article will present these potentialities of a material oriented Target Costing. Besides, the general methodology of Target Costing will be modified to meet the specifics of materials from the perspectives of users of materials on the one hand and developers respectively producers of materials on the other.     

Morphology of polymer blends in the melting section of co‐rotating twin screw extruders

The properties of polymer blends are largely determined by the morphological structure of the polymer combinations that are involved. In terms of extruder design, this means it is necessary to have models available for estimating the development of the morphology over the length of the screws. Since significant morphological changes are observed in the melting section, in particular, is it necessary to analyze not only the plasticizing process for binary material combinations but also the initial formation and further development of the morphology in this section of the extruder. In the framework of this study, experimental investigations were conducted into polypropylene/polyamide 6 (PP/PA6) blends with small components (by weight) of the disperse PA phase. Apart from varying the process conditions of screw speed and throughput, the viscosity ratio was also varied through the use of two different PP grades. The degree of melting and the development of the morphology over the length of the screws were determined for the individual tests. The study of blend morphology in the melting section reveals key findings that must be taken into account for modeling the initial formation and further development of the morphology. It is very clear that, on the second component, which melts at higher temperatures, a kind of melt film removal occurs at the surface of the granules as they melt. The drops of second component in the melting section, which are directly adjacent to components that have not yet fully melted in some cases, have already assumed dimensions (in the μm range) similar to those that are seen at the end of the extrusion process. This means that, in the melting section of the twin‐screw extruder, no volumes become detached from or are worn off the already‐molten granule surfaces. An evaluation of scanning electron micrographs also shows that, in the melting section of co‐rotating twin‐screw extruders, virtually all the degradation mechanisms that can essentially be distinguished, such as quasi‐steady drop breakup, folding, end pinching and decomposition through capillary instabilities, take place in parallel.     

Experimental study of the specific energy consumption for brackish water desalination by reverse osmosis

The specific energy consumption (SEC) for brackish water desalination by reverse osmosis membranes was studied experimentally at various operating conditions of feed salt water concentration, temperature, recovery and applied pressure without an energy recovery device. The results were compared with ideal theoretical values. Low‐pressure experiments, corresponding to domestic applications, were performed with a maximum pressure of 8 bar. The energy consumption at normal operating conditions was assessed with a maximum applied pressure of 18 bar. In either case, the recovery was kept between 0.3 and 0.8. Deviations between ideal and experimental values of SEC are pronounced and even more so at the lower pressures and the higher salinity concentrations. The present experimental data for brackish water desalination did not indicate an optimum of the SEC, although for a given feed concentration lower values were obtained at higher pressures, temperatures and recoveries. However, an empirical fit of the present data suggests that an economic optimum for the design and operation may exist at pressures up to 20 bar and recoveries up to 50%. Copyright © 2010 John Wiley & Sons, Ltd.     

具备更强机械性能的高功率IGBT模块——采用最新3．3kV IGBT3芯片技术

本文介绍了新一代IHM．B具备更强机械性能的高功率IGBT模块，其融合了最新的设计、材料、焊接和安装技术。首批IHMB模块将搭载最新的、采用沟槽栅单元设计的3．3kV IGBT3芯片，在保持机械兼容性的同时，极大地提高了器件的热效率和电气效率。本文还对宇宙射线以及功率循环试验进行了研究。