Pasture intake and substitution rate effects on nutrient digestion and nitrogen metabolism during continuous culture fermentation

A continuous culture system was used to investigate ruminal digestion in response to increased pasture intake and three different substitution rates (SR) in a 4 x 4 Latin square design. The treatments were 1) low pasture (55 g dry matter (DM)/d, 2) medium pasture (MP, 65 g DM/d), 3) high pasture (75 g DM/d), and 4) pasture (45 g DM/d) plus concentrate (PC, 30 g DM/d). Treatments were designed to produce a low (0.33), medium (0.67), and high (1.00) SR (g of pasture/g of concentrate) by contrasting the low, medium, and high pasture intake treatments with the pasture plus concentrate treatment, respectively. Pasture was fed at 0630, 1000, 1730, and 2100 h, and concentrate at 0600 and 1700 h. Digestibility of DM and neutral detergent fiber were not affected by the amount of pasture. As the amount of pasture increased, pH decreased linearly, and total volatile fatty acid and NH3-N concentrations, and nonammonia N and bacterial N flows increased linearly. Concentrate supplementation did not affect DM digestibility at high SR but increased DM digestibility at low SR. Concentrate supplementation reduced pH and NH3-N concentrations at the three SR. Concentrate supplementation reduced the ratio of rumen degradable N to rumen degradable organic matter; however, the mechanism depended on the SR. High SR, concentrate supplementation reduced rumen degradable N, which reduced NIH-N concentration without affecting bacterial N flow. At low SR, concentrate supplementation increased rumen degradable organic matter, which reduced NH3-N concentration and increased bacterial N flow. Based on these results, at low SR, concentrate supplementation may enhance animal performance because of higher total DM intake and synthesis of microbial protein.     

Hierarchical design of an electro-hydraulic actuator based on robust LPV methods

The paper proposes a hierarchical control design of an electro-hydraulic actuator, which is used to improve the roll stability of vehicles. The purpose of the control system is to generate a reference torque, which is required by the vehicle dynamic control. The control-oriented model of the actuator is formulated in two subsystems. The high-level hydromotor is described in a linear form, while the low-level spool valve is a polynomial system. These subsystems require different control strategies. At the high level, a linear parameter-varying control is used to guarantee performance specifications. At the low level, a control Lyapunov-function-based algorithm, which creates discrete control input values of the valve, is proposed. The interaction between the two subsystems is guaranteed by the spool displacement, which is control input at the high level and must be tracked at the low-level control. The spool displacement has physical constraints, which must also be incorporated into the control design. The robust design of the high-level control incorporates the imprecision of the low-level control as an uncertainty of the system.     

In vitro models for research on cell differentiation and malignant degeneration in the human prostate

The methods are reviewed for obtaining monolayer epithelium cultures both in normal and hyperplastic or malignant prostate glands. Preparation of pure epithelial tissue cultures is dealt with in detail. The major prostate cell lines are described. Special attention is paid to the markers of differentiation and sensitivity to hormones in normal and tumour prostatic cells in vitro. Prospects for the use of prostatic cell cultures as models in oncology are outlined.     

Molecular-Level Characterization of Heterogeneous Catalytic Systems by Algorithmic Time Dependent Monte Carlo

Monte Carlo algorithms and codes, used to study heterogeneous catalytic systems in the frame of the computational section of the NANOCAT project, are presented along with some exemplifying applications and results. In particular, time dependent Monte Carlo methods supported by high level quantum chemical information employed in the field of heterogeneous catalysis are focused. Technical details of the present algorithmic Monte Carlo development as well as possible evolution aimed at a deeper interrelationship of quantum and stochastic methods are discussed, pointing to two different aspects: the thermal-effect involvement and the three-dimensional catalytic matrix simulation. As topical applications, (i) the isothermal and isobaric adsorption of CO on Group 10 metal surfaces, (ii) the hydrogenation on metal supported catalysts of organic substrates in two-phase and three-phase reactors, and (iii) the isomerization of but-2-ene species in three-dimensional supported and unsupported zeolite models are presented.     

Bilateral renal artery stenosis diagnosed during pregnancy

Bilateral renal artery stenosis was diagnosed noninvasively in the 17th gestational week, in a chronically hypertensive pregnant woman, by renal artery duplex ultrasound examination, MRI and MR angiography. Continuous monitoring of the mother and the fetus was performed. Blood pressure was stabilized by complex antihypertensive therapy, but from the beginning of the third trimester superimposed preeclampsia developed gradually. In the 34th gestational week a 1600-g newborn was delivered by elective cesarean section. The case report draws attention to the significance of the thorough examination of hypertensive women before pregnancy.     

Farbmessungen auf dem Gebiete der Lebensmitteluntersuchung

Ohne Zusammenfassungbedeutet mit Abbildungen.     

Thermodynamically Stable SiwCxNyOz Polymer-Like, Amorphous Ceramics Made from Organic Precursors

This communication reports new results on the enthalpy of formation of pseudo-amorphous ceramic compounds constituted from silicon, carbon, oxygen, and nitrogen (SiCNO), made from the polymer route. Again, like the SiCO materials, although with one exception, the enthalpy of formation from crystalline components (SiO₂ cristobalite, β-Si₃N₄, SiC, and excess C) is negative. Some of the alloyed oxygen–nitrogen compositions yield enthalpies that are much more negative (∼100 kJ/g·atom) in comparison with compositions that contain mainly oxygen or nitrogen (∼20 kJ/g·atom). The exception, having a N/O ratio near 2, has a positive value for the enthalpy. This may reflect the presence of nanoclusters of stoichiometric Si₂N₂O instead of the pseudo-amorphous nanodomain structure seen for the other samples.     

Polyaniline–silver composites prepared by the oxidation of aniline with silver nitrate in solutions of sulfonic acids

Aniline was oxidized with silver nitrate in aqueous solutions of sulfonic acids: camphorsulfonic, methanesulfonic, sulfamic, or toluenesulfonic acids. Polyaniline–silver composites were produced slowly in 4 weeks in good yield, except for the reaction, which took place in sulfamic acid solution, where the yield was low. Polyaniline in the emeraldine form was identified with UV–visible, FTIR, and Raman spectra. Thermogravimetric analysis was used to determine the silver content, which was close to the theoretical prediction of 68.9 wt.%. Transmission electron microscopy demonstrated the presence of silver nanoparticles of ca 50 nm average sizes as the dominating species, and hairy polyaniline nanorods having diameter 150–250 nm accompanied them. The highest conductivity of 880 S cm⁻¹ was found with the composite prepared in methanesulfonic acid solution. Its conductivity decreased with temperature increasing in the 70–315 K range, which is typical of metals such as silver. The conductivity of composites prepared in solutions of other acids was lower and increased with increasing temperature. Such dependence is typical of semiconductors, reflecting the dominating role of polyaniline in the conductivity behaviour. It is proposed that interfaces between the polyaniline matrix and dispersed silver nanoparticles play a dominating role in macroscopic level of conductivity.     

Cardiovascular actions of cannabinoids and their generation during shock

Marijuana is a widely abused recreational drug well known for its psychoactive properties. Cannabinoids, the active ingredients of marijuana, elicit their neurobehavioral effects by interacting with the CB1 cannabinoid receptor subtype, expressed primarily in the brain but also present in some peripheral tissues. A second receptor subtype, the CB2 receptor, is expressed on cells of the immune system and is thought to be responsible for the immunosuppressant effects of cannabinoids. Recently, endogenous lipidlike substances have been identified, including arachidonyl ethanolamide (anandamide) and 2-arachidonyl glyceride, that bind to cannabinoid receptors and mimic many of the neurobehavioral effects of plant-derived cannabinoids. Both plant-derived cannabinoids and the endogenous ligands have been shown to elicit hypotension and bradycardia via activation of peripherally located CB1 receptors. Possible underlying mechanisms include presynaptic CB1 receptor mediated inhibition of norepinephrine release from peripheral sympathetic nerve terminals, and/or direct vasodilation via activation of vascular cannabinoid receptors. The latter may also be the target of endocannabinoids of vascular endothelial origin. Recent studies indicate that a peripheral endogenous cannabinoid system in circulating macrophages and platelets is activated in hemorrhagic and septic shock and may contribute to the hypotension associated with these conditions via activation of vascular cannabinoid receptors. The potential role of this mechanism in human shock conditions is under investigation.