Absorption and fluorescence spectroscopic study on complexation of Oxazine 1 Dye by calix[8]arenesulfonate

It has been established by combined absorption and fluorescence measurements that the cationic dye Oxazine 1 (OX) and the polyvalent anionic host calix[8]arenesulfonate (SCA8) form two complexes in simultaneous reactions: OX + SCA8 <--> OX.SCA8 (1), and OX.SCA8 + OX <--> OX(2).SCA8 (2). The equilibrium constants for the two reactions, as functions of the ionic strength (I), and the absorption and fluorescence spectra of the two complex species have been determined by a least-squares fitting method from the experimental data. The variations of the binding constants with the ionic strength could be described on the basis of Debye-Huckel theory. The equilibrium constants are large; their values extrapolated to I = 0 are K(1) = 5.5 x 10(6) M(-1) and K(2) = 4.4 x 10(5) M(-1). The fluorescence of OX undergoes a strong static quenching upon complexation. These results indicate that the complexes are held together by strong electrostatic forces. The addition of non-fluorescent tetramethylammonium chloride to OX-SCA8 mixtures results in a dramatic fluorescent enhancement, which demonstrates the potential applicability of this supramolecular system in fluorescence assays.     

ITU-T G.729.1 Scalable Codec for New Wideband Services

G.729.1 is a scalable codec for narrowband and wideband conversational applications standardized by ITU-T Study Group 16. The motivation for the standardization work was to meet the new challenges of VoIP in terms of quality of service and efficiency in networks, in particular regarding the strategic rollout of wideband service. G.729.1 was designed to allow smooth transition from narrowband (300-3400 Hz) PSTN to high-quality wideband (50-7000 Hz) telephony by preserving backward compatibility with the widely deployed G.729 codec. The scalable structure allows gradual quality increase with bit rate. A low-delay mode makes the coder especially suitable for high-quality speech communication. The article presents the standardization goals and process, an overview of the coding algorithm, and the codec performance in various conditions.     

Influence of steaming on selected wood properties of four hardwood species

Influence of steaming on various mechanical and physical properties of two European (Robinia pseudoacacia L., Quercus robur L.) and two tropical (Intsia bijuga, Hymenolobium petraeum) hardwood species were investigated. Each of these wood species requires adequate adhesive systems for the use as dimension stock because of their highly reactive surface chemistry. In order to optimize the gluing behaviour of the timbers involved, steaming processes with five different sets of parameters (steaming time and temperature) were carried out. In addition to the adhesive test, bending strength, hardness, and colour of the modified timbers were examined. The result of steaming highly depends on the wood species. For black locust, steaming is a suitable method of colour homogenization and colourization. Short term, low temperature treatment improves the adhesion performance also, whereas the colour change value reaches its maximum in the case of long term, high temperature steaming. Hue shift of oak and sapupira was inconsiderable for any applied set of parameters, only a small L* decrease was observed at higher temperatures. The colour of merbau samples shifted slightly during the treatment. Bending strength and hardness of wood samples in all of the four wood species decreased during the treatment. However, steaming time is more important than temperature while aspect of colour change both time and temperature has the same significance. Adhesive properties of sapupira can be greatly improved by hydrothermal treatment.     

Determination the efficiency of open mixing screws

Our goal is the determination of the material flow processes around the mixing screws and introducing a new mixing index which can characterize the perform     

Design of Engineered Elastomeric Substrate for Stretchable Active Devices and Sensors

In the field of flexible electronics, emerging applications require biocompatible and unobtrusive devices, which can withstand different modes of mechanical deformation and achieve low complexity in the fabrication process. Here, the fabrication of a mesa‐shaped elastomeric substrate, supporting thin‐film transistors (TFTs) and logic circuits (inverters), is reported. High‐relief structures are designed to minimize the strain experienced by the electronics, which are fabricated directly on the pillars' surface. In this design configuration, devices based on amorphous indium‐gallium‐zinc‐oxide can withstand different modes of deformation. Bending, stretching, and twisting experiments up to 6 mm radius, 20% uniaxial strain, and 180° global twisting, respectively, are performed to show stable electrical performance of the TFTs. Similarly, a fully integrated digital inverter is tested while stretched up to 20% elongation. As a proof of the versatility of mesa‐shaped geometry, a biocompatible and stretchable sensor for temperature mapping is also realized. Using pectin, which is a temperature‐sensitive material present in plant cells, the response of the sensor shows current modulation from 13 to 28 °C and functionality up to 15% strain. These results demonstrate the performance of highly flexible electronics for a broad variety of applications, including smart skin and health monitoring.     

Statistical Evaluation of Factors Affecting the Leaching Process of Waste Electrical and Electronic Equipment using Sodium Persulfate

Recycling of waste electrical and electronic equipment (WEEE) is important not only to reduce the amount of waste requiring treatment, but also to promote the recovery of valuable materials. Implementation of the European Directive on WEEE and recycling targets imposed in the European Union will require new processes to be developed and applied to recover metals from WEEE. This study aims to provide an alternative process for the dissolution of metals from WEEE which contains Cu and Zn based on our previous research. The effects of leaching parameters, such as temperature, Na₂S₂O₈ concentration, and leaching time, were separately investigated on leaching of copper, zinc, and brass (alloy composition ?35% zinc and 65% copper) in Na₂S₂O₈ solution (0.1, 0.2 and 0.3 M). Box–Behnken experimental design (BBD) method was used to determine the number and the condition of necessary leaching experiments. Statistical analysis of variance (ANOVA) was performed to see whether process parameters such as leaching time, temperature, and oxidant concentration are statistically significant or not on the leaching performance. Results show leaching time as the most influential factor in the dissolution process, for the first six models. Two extended models have been developed to optimize the parameters of the investigated process. In these models, we consider the metal composition as a model input next to the earlier investigated parameters. Optimal condition for maximum copper and zinc dissolution in Na₂S₂O₈ environment can be found for parameter values: temperature 45°C, oxidant concentration 0.1 M and leaching time 35 min.