Spherulite Growth Rate in Polypropylene/Silica Nanoparticle Composites: Effect of Particle Morphology and Compatibilizer

Spherical and tube‐like (TL) silica nanoparticles were melt blended with an isotactic polypropylene (PP) matrix and its effect on the isothermal spherulite growth rate was analyzed by polarized optical microscope. The addition of low amount (≈1 wt.‐%) of either 15 nm spherical or TL particles raises the spherulite growth rate and the nucleation density of spherulites. Samples prepared with silica spheres of 80 nm otherwise do not show any change in the crystallization behavior. By adding a compatibilizer, both the nucleation density and the spherulite growth rate of the pure polymer are increased. Noteworthy, although the nanoparticles do not further increase the nucleation density of the PP/compatibilizer blend, independent of its form and size, they cause a decrease in its spherulite growth rate.

     

Influence of calcium carbonate filler and mixing type process on structure and properties of styrene–acrylonitrile/ethylene–propylene–diene polymer blends

The properties of styrene–acrylonitrile (SAN) and ethylene–propylene–diene (EPDM) blends containing different types of calcium carbonate filler were studied. The influence of mixing type process on the blend properties was also studied. Two different mixing processes were used. The first one includes mixing of all components together. The other process is a two‐step mixing procedure: masterbatch (MB; EPDM/SAN/filler blend) was prepared and then it was mixed with previously prepared polymer blend. Surface energy of samples was determined to predict the strength of interactions between polymer blend components and used fillers. The phase morphology of blends and their thermal and mechanical properties were studied. From the results, it can be concluded that the type of mixing process has a strong influence on the morphological, thermal, and mechanical properties of blends. The two‐step mixing process causes better dispersion of fillers in blends as well as better dispersion of EPDM in SAN matrix, and therefore, the finest morphology and improved properties are observed in blends with MB. It can be concluded that the type of mixing process and carefully chosen compatibilizer are the important factors for obtaining the improved compatibility of SAN/EPDM blends. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Formation of a Ti-siliceous trimodal material with macroholes, mesopores and zeolitic features via a one-pot templating synthesis

Based on a facile one-pot templating synthesis, using a TS-1 zeolite recipe whereby part of the zeolite structure directing agent is replaced by a mesopore templating agent, a trimodal material is formed. The resulting meso-TSM material combines mesoporosity (Ti-MCM-41) with zeolitic features (TS-1) and a unique sheet-like morphology with uniform macroporous voids (macroholes). Moreover, the macrohole formation, mesoporosity and zeolitic properties of the meso-TSM material can be controlled in a straightforward way by adjusting the length of the hydrothermal treatment. This newly developed material may imply great potential for catalytic redox applications and diffusion limitated processes because of its highly tunable character in all three dimensions (micro-, meso- and macroporous scale).     

How the Influence of Different Salts on Interfacial Properties of Surfactant–Oil–Water Systems at Optimum Formulation Matches the Hofmeister Series Ranking

In this work, we present the effects of salts on sodium dodecyl benzene sulfonate micellization and on the interfacial performance of a sodium dodecyl benzene sulfonate–heptane–brine system at optimum formulation, i.e., hydrophilic–lipophilic deviation (HLD) = 0. In order to do that, interfacial tension and dilational interfacial rheology properties of surfactant–heptane–water systems at optimum formulation are measured using an interfacial spinning drop tensiometer with an oscillating velocity, which can accurately measure interfacial rheology properties at both low and ultralow interfacial tensions. The brines used contain one of the following salts: MgCl₂, CaCl₂, NaCl, NH₄Cl, NaNO₃, CH₃COONa, or Na₂SO₄. We performed a one-dimensional salinity scan with each of these salts to achieve an optimum formulation. In relation to the Hofmeister series, we found that, at optimum formulation, systems with chaotropic ions (NH₄⁺, NO₃⁻) present interfaces with ultralow interfacial tensions, very low dilational modulus, and a low phase angle, whereas kosmotropic ions (Mg²⁺, Ca²⁺, SO₄⁻²) generate high interfacial tension and high rigidity monolayers. Intermediate ions in the Hofmeister series (Na⁺, CH₃COO⁻, Cl⁻) present interfaces with intermediate properties. Furthermore, according to the Hofmeister series, interfaces can be respectively ordered from higher to lower rigidity for surfactant counterions Mg²⁺ > Ca²⁺ > Na⁺ > NH₄⁺ and coions SO₄²⁻ > CH₃COO^– > Cl⁻ > NO₃⁻, which correspond to a salting-out (highest rigidity) and salting-in (lowest rigidity) effect. We observed that counterions have a more significant effect on surfactant–oil–water system properties than those that act as coions.     

The Impact of [C16Pyr][Amp] on the Aggressiveness in Breast and Prostate Cancer Cell Lines

Breast (BrCa) and prostate (PCa) cancers are the most common malignancies in women and men, respectively. The available therapeutic options for these tumors are still not curative and have severe side effects. Therefore, there is an urgent need for more effective antineoplastic agents. Herein, BrCa, PCa, and benign cell lines were treated with two ionic liquids and two quinoxalines and functional experiments were performed—namely cell viability, apoptosis, cytotoxicity, and colony formation assays. At the molecular level, an array of gene expressions encompassing several molecular pathways were used to explore the impact of treatment on gene expression. Although both quinoxalines and the ionic liquid [C2OHMIM][Amp] did not show any effect on the BrCa and PCa cell lines, [C16Pyr][Amp] significantly decreased cell viability and colony formation ability, while it increased the apoptosis levels of all cell lines. Importantly, [C16Pyr][Amp] was found to be more selective for cancer cells and less toxic than cisplatin. At the molecular level, this ionic liquid was also associated with reduced expression levels of CPT2, LDHA, MCM2, and SKP2, in both BrCa and PCa cell lines. Hence, [C16Pyr][Amp] was shown to be a promising anticancer therapeutic agent for BrCa and PCa cell lines.     

Tetragonal structure, anionic vacancies and catalytic activity of SO4-ZrO2 catalysts for n-butane isomerization

An assessment of the influence of the crystal structure, surface hydroxylation state and previous oxidation/reduction pretreatments on the activity of sulfate-zirconia catalysts for isomerization of n-butane was performed using crystalline and amorphous zirconia supports. Different sulfation methods were used for the preparation of bulk and supported SO₄²⁻-ZrO₂ with monoclinic, tetragonal and tetragonal+monoclinic structures. Activity was important only for the samples that contained tetragonal crystals. The catalysts prepared from pure monoclinic zirconia showed negligible activity. SO₄²⁻-ZrO₂ catalysts prepared by sulfation of crystalline zirconia displayed sites with lower acidity and cracking activity than those sulfated in the amorphous state. Prereduction of the zirconia samples with H₂ was found to greatly increase the catalytic activity, and a maximum rate was found at a reduction temperature of 550–600 °C, coinciding with a TPR peak supposedly associated with the removal of lattice oxygen and the creation of lattice defects. A weaker dependence of catalytic activity on the density or type of surface OH groups on zirconia (before sulfation) was found in this work.

A model of active site generation was constructed in order to stress the dependence on the crystal structure and crystal defects. Current and previous results suggest that tetragonal structure in active SO₄²⁻-ZrO₂ is a consequence of the stabilization of anionic vacancies in zirconia. Anionic vacancies are in turn supposed to be related to the catalytic activity for n-butane isomerization through the stabilization of electrons from ionized intermediates.     

Chimeras of the homing endonuclease PI-SceI and the homologous Candida tropicalis intein: a study to explore the possibility of exchanging DNA-binding modules to obtain highly specific endonucleases with altered specificity

Homing endonucleases are extremely specific endodeoxyribonucleases. In vivo, these enzymes confer mobility on their genes by inducing a very specific double-strand cut in cognate alleles that lack the cooling sequence for the homing endonuclease; the cellular repair of the double-strand break with the endonuclease-containing allele as a template leads to integration of the endonuclease gene, completing the homing process. As a result of their extreme sequence specificity, homing endonucleases are promising tools for genome engineering. For this purpose, it is desirable to design enzymes with defined new specificities. To analyse which DNA-binding elements are potential candidates for use in the design of enzymes with modified or even new specificity, we produced several chimeric proteins derived from the Saccharomyces cerevisiae VMA1 intein (PI-SceI) and the related Candida tropicalis VMA1 intein. Although the mature Candida intein is devoid of endonucleolytic activity, the exchange of two DNA-binding modules of PI-SceI with the homologous elements from the Candida intein results in an active endonuclease. The low sequence homology in these modules indicates that different protein-DNA contacts are responsible for the recognition of related DNA sequences. This flexibility in DNA recognition should, in principle, allow endonucleases to be produced with new specificities useful for genome engineering.     

Reverse Micellar Extraction of Lysozyme Using Two Dialkyl Sodium Phosphinates

The extraction of lysozyme was studied using di‐(2,4,4‐trimethylpentyl) sodium phosphinate, R₂POONa, and di‐(2,4,4‐trimethylpentyl) sodium dithiophosphinate, R₂PSSNa. For a R₂POONa reverse micellar system, all lysozyme was removed from the aqueous phase when the pH of the aqueous solution was set below the pI of the protein. The extraction of lysozyme into a R₂PSSNa reverse micellar system was independent of the pH of the aqueous phase. A solubilization limit of lysozyme exists in the R₂POONa reverse micellar phase. The lysozyme recovery was 70% from the R₂POONa reverse micellar phase, and less than 10% from the R₂PSSNa reverse micellar phase.     

How We Make DNA Origami

DNA origami has attracted substantial attention since its invention ten years ago, due to the seemingly infinite possibilities that it affords for creating customized nanoscale objects. Although the basic concept of DNA origami is easy to understand, using custom DNA origami in practical applications requires detailed know‐how for designing and producing the particles with sufficient quality and for preparing them at appropriate concentrations with the necessary degree of purity in custom environments. Such know‐how is not readily available for newcomers to the field, thus slowing down the rate at which new applications outside the field of DNA nanotechnology may emerge. To foster faster progress, we share in this article the experience in making and preparing DNA origami that we have accumulated over recent years. We discuss design solutions for creating advanced structural motifs including corners and various types of hinges that expand the design space for the more rigid multilayer DNA origami and provide guidelines for preventing undesired aggregation and on how to induce specific oligomerization of multiple DNA origami building blocks. In addition, we provide detailed protocols and discuss the expected results for five key methods that allow efficient and damage‐free preparation of DNA origami. These methods are agarose‐gel purification, filtration through molecular cut‐off membranes, PEG precipitation, size‐exclusion chromatography, and ultracentrifugation‐based sedimentation. The guide for creating advanced design motifs and the detailed protocols with their experimental characterization that we describe here should lower the barrier for researchers to accomplish the full DNA origami production workflow.