Effect of the nature and structure of pillared clays in the catalytic behaviour of supported manganese oxide

In the present work, the complete oxidation of acetone has been studied over a series of supported manganese oxide catalysts on the unpillared and the Al- and Zr-pillared forms of two natural clays, a montmorillonite and a saponite. A significant influence of the clay supports characteristics on the catalytic performance has been found. The following order of improving catalytic performance is established with respect to the pillars composition: Al-pillared clays < unpillared clays < Zr-pillared clays.     

Direct Ink-Jet Printing of Vertical Walls

Direct jet printing can assemble ceramic powder into a three dimensional shape by firing droplets of ink through a nozzle to build a multiple layered structure. As with stereolithography and selective laser sintering, the surface texture is expected to witness the layered assembly. The ability to create vertical walls by direct ink-jet printing was explored using a test piece based on a maze. The structure and topography are discussed in terms of droplet spreading and drying.     

Oligomer and Polymer Formation in Hexamethylcyclotrisiloxane (D<Subscript>3</Subscript>) – Hydrosilane Systems Under Catalysis by tris(pentafluorophenyl)borane

Summary Reactions of hexamethylcyclotrisiloxane, D₃, with 1,1,3,3-tetramethyldisiloxane, ^HMM^H, 1,1,1,3,3-pentamethyldisiloxane, ^HMM, phenyldimethylsilane and phenylmethylsilane catalyzed by tris(pentafluorophenyl)borane were studied. These reactions lead to ring opening of D₃ by the SiH reactant producing open chain oligomers with hydrosilane functionality at one or both chain ends. The reactivity of the hydrosilanes toward D₃ decreases in the series: PhMeSiH₂ > ^HMM^H > PhMe₂SiH > ^HMM. Competitive self-oligomerization of ^HMM^H and ^HMM also occurs. Primary products of these processes are able to enter into reactions with the SiH and D₃ reactants; some also undergo cyclization. Thus, consecutive and competitive processes lead to a series of various oligohomologues. Gas chromatography in conjunction with chemical ionization mass spectroscopy permitted identification of structure and determination of the basic directions of these oligomerization processes. Polysiloxanes of higher molecular weight may be also formed in some of these systems. The reactions, which occur in the systems studied, are rationalized on the basis of the mechanism involving the hydride transfer from silicon to trivalent boron. This includes the transient formation of tertiary trisilyloxonium borate which decomposes by the hydride transfer to one of the silicon atoms of the trisilyloxonium center. Footnote: This paper is dedicated to Professor Ian Manners in recognition of his significant contributions to the field of organometallic polymers.     

Modelling of membrane nanofiltration—pore size distribution effects

The effects of log-normal pore size distributions on the rejection of uncharged solutes and NaCl at hypothetical nanofiltration membranes have been assessed theoretically. The importance of pore radius-dependent properties such as solvent viscosity and dielectric constant is increased by the introduction of a pore size distribution in calculations. However, the effect of porewise variation in viscosity is less apparent when considered at a defined applied pressure rather than at a defined flux, showing a further advantage of basing theoretical analysis of nanofiltration in terms of applied pressure.Truncated pore size distributions gave better agreement than full distributions with experimental rejection data for a Desal-DK nanofiltration membrane. Such truncation is in agreement with the findings of atomic force microscopy (AFM). Analysis of uncharged solute rejection data alone could not give useful information about membrane pore size distribution. Neither could such a distribution be obtained quantitatively directly from AFM images. However, use of the shape of the distribution obtained by AFM in conjunction with experimental rejection data for an uncharged solute allows calculation of corrected distributions. Importantly, incorporation of such a corrected pore size distribution in calculations of NaCl rejection gave better agreement with experimental data, compared to calculations assuming uniform pores, at high pressure, the region of industrial interest.     

Study of Ozonated Sunflower Oil Using 1H NMR and Microbiological Analysis

Prior studies have proven that ozonated vegetable oils present a high germicidal power. Ozonation of sunflower oil at different applied ozone dosage was carried out and peroxide and aldehydes indices along with antimicrobial activity were determined. The reaction products were identified using Proton Nuclear Magnetic Resonance Spectroscopy (¹H NMR). The principal signals intensity values were used for following the reaction course between ozone and sunflower oil. The reaction was following up to peroxide index values of 1202 mmol-equi/kg. The intensities of olefinic proton signals decreased with the gradual increase in ozone concentration but without disappearing completely. The Criegee ozonides obtained at 107.1 mg/g of ozone doses were approximately 3.9-fold higher than that at beginning of the reaction. The aldehyde protons were observed as a weak intensity signal in all the spectra. The signals belonging to olefinic protons from hydroperoxides appeared weak and increased with the increase in ozone doses. Signals from other oxygenated groups were assigned. The highest action spectrum of antimicrobial activity was obtained with the higher peroxide index. It was concluded that at higher applied ozone doses, the higher the antimicrobial activity potential of ozonized sunflower oil     

Effect of annealing on the permeation characteristics of gases of coextruded LLDPE films

The temperature dependence of both the permeability and diffusion coefficients of carbon dioxide, oxygen and nitrogen in annealed LLDPE films are studied. It is found that the values of the permeability coefficient through the annealed membranes are nearly four times larger than those through the non-annealed ones. The fact that annealing slightly diminishes the values of the diffusion coefficient leads to the conclusion that the rise in permeability detected in the films by effect of annealing should be attributed to an increase in solubility. The permeability characteristics of the films are interpreted in terms of the free volume theory.     

A Taxonomy-Based Usability Study of an Intelligent Speed Adaptation Device

Usability studies are often based on ad hoc definitions of usability. These studies can be difficult to generalize, they might have a steep learning curve, and there is always the danger of being inconsistent with the concept of usability as defined in standards and the literature. This alternative approach involves comprehensive, general-purpose, and hierarchically structured taxonomies that follow closely the main usability literature. These taxonomies are then instantiated for a specific product. To illustrate this approach, a usability study for a prototype of an Intelligent Speed Adaptation device is described. The usability study consists of usability requirements analysis, heuristic evaluation, and subjective analysis, which helped identify problems of clarity, operability, robustness, safety, and aesthetics. As a context-specific usability taxonomy for this particular field of application happened to exist, the way that real-world usability results can be mapped to that taxonomy compared to the taxonomy in this article is examined, with the argument that this study’s taxonomy is more complete and generalizable.     

Kinetically controlled siloxane ring-opening polymerization

Some basic aspects of the kinetics and mechanisms of anionic and cationic ring-opening polymerization of cyclic siloxanes are discussed in connection with their use in polymer synthesis. The emphasis is put on the polymerization of strained ring monomers, such as cyclic trisiloxanes, since these provide the possibility of tailoring the polymer structure. Much attention is devoted to association phenomena and to oligomer formation processes.This review is from the Second International Topical Workshop, Advances in Silicon-Based Polymer Science.     

Invariant three- and four-phase equilibria in the magnesium-rich corner of the Mg-Cu-Sn ternary system

Invariant three- and four-phase equilibria in the magnesium-rich corner of the Mg-Cu-Sn ternary system have been studied by differential thermal analysis, optical microscopy, electron probe microanalysis and X-ray diffraction. The L(Mg) + Mg₂ Cu + Mg₂Sn ternary eutectic reaction was found to be at 467 °C and at Mg–13.5 at % Cu–4.4 at% Sn. The LMg₂Cu + Mg₂Sn pseudo-binary eutectic reaction is tentatively located at 522°C and at Mg–26.0 at % Cu–7.7 at % Sn.     

An approach to reduce energy consumption and performance losses on heterogeneous servers using power capping

Journal of Scheduling - Rapid growth of demand for remote computational power, along with high energy costs and infrastructure limits, has led to treating power usage as a primary constraint in...