Feasibility demonstration of low pump power operation for 1.48 mu m diode-pumped erbium-doped fibre amplifier module

An optimisation of the erbium-doped fibre greatly improves the 1.48 mu m pumping efficiency. The amplifier exhibits 26.2 dB fibre gain for 8 mW launched pump power and 20.2 dB gain for only 5.2 mW pump power, giving an outstanding 3.9 dB/mW gain coefficient.<>     

Detection of Channel Variations to Improve Channel Estimation Methods

In current digital communication systems, channel information is typically acquired by supervised approaches that use pilot symbols included in the transmit frames. Given that pilot symbols do not convey user data, they penalize throughput spectral efficiency, and transmit energy consumption of the system. Unsupervised channel estimation algorithms could be used to mitigate the aforementioned drawbacks although they present higher computational complexity than that offered by supervised ones. This paper proposes a simple decision method suitable for slowly varying channels to determine whether the channel has suffered a significant variation, which requires to estimate the matrix of the recently changed channel. Otherwise, a previous estimate is used to recover the transmitted symbols. The main advantage of this method is that the decision criterion is only based on information acquired during the time frame synchronization, which is carried out at the receiver. We show that the proposed criterion provides a considerable improvement of computational complexity for both supervised and unsupervised methods, without incurring in a penalization in terms of symbol error ratio. Specifically, we consider systems that make use of the popular Alamouti code. Performance evaluation is accomplished by means of simulated channels as well as making use of indoor wireless channels measured using a testbed.     

Comparison of methods for the assessment of growth of food spoilage moulds in solid substrates

The objective of the study was to evaluate the general suitability of ergosterol content, CFU, and colony diameters determinations for a range of fungi representing food spoilage moulds for the assessment of their growth on solid substrates, in particular intermediate moisture foods. Sixteen food-borne mould species were inoculated onto DG18 agar overlaid with cellophane, allowing determination of a direct measurement of biomass density weighing. The samples were also evaluated with regard to visible and microscopic colony diameters, total ergosterol content, Thoma counts, viable CFU counts, and so on. The same parameters were assayed in the spore suspensions obtained from those cultures. Data were evaluated by multivariate data analysis using projection methods such as principal component analysis (PCA), showing some groupings among the measured variables, mainly linked to the sporulating/nonsporulating nature of the different species tested. Ratios among the different variables were obtained, compared among the species, and evaluated along time (2-10 days). It was concluded that, as a general rule for all the species, ergosterol content and colony diameters were better correlated to fungal biomass dry weight than CFU counts were. Conversion factors were 0.3-3 microg ergosterol mg(-1) biomass dry weight and 76-227 mg biomass dry weight cm(-2), depending on the species.     

New food safety challenges of viral contamination from a global perspective: Conventional,emerging, and novel methods of viral control

Food- and waterborne viruses, such as human norovirus, hepatitis A virus, hepatitis E virus, rotaviruses, astroviruses, adenoviruses, and enteroviruses, are major contributors to all foodborne illnesses. Their small size, structure, and ability to clump and attach to inanimate surfaces make viruses challenging to reduce or eliminate, especially in the presence of inorganic or organic soils. Besides traditional wet and dry methods of disinfection using chemicals and heat, emerging physical nonthermal decontamination techniques (irradiation, ultraviolet, pulsed light, high hydrostatic pressure, cold atmospheric plasma, and pulsed electric field), novel virucidal surfaces, and bioactive compounds are examined for their potential to inactivate viruses on the surfaces of foods or food contact surfaces (tools, equipment, hands, etc.). Every disinfection technique is discussed based on its efficiency against viruses, specific advantages and disadvantages, and limitations. Structure, genomic organization, and molecular biology of different virus strains are reviewed, as they are key in determining these techniques effectiveness in controlling all or specific foodborne viruses. Selecting suitable viral decontamination techniques requires that their antiviral mechanism of action and ability to reduce virus infectivity must be taken into consideration. Furthermore, details about critical treatments parameters essential to control foodborne viruses in a food production environment are discussed, as they are also determinative in defining best disinfection and hygiene practices preventing viral infection after consuming a food product.     

Development,Characterization, and Stability of O/W Pepper Nanoemulsions Produced by High-Pressure Homogenization

Interest in the utilization of bioactive plant compounds in foods has increased due to their biochemical activities (antioxidant, antimicrobial, etc.), and as alternatives in the reduction of the use of high concentrations of chemical substances. However, some of these additives are hydrophobic, thus being harder to disperse into the food matrix, which is generally water-based. A good alternative is the use of low concentrations of these compounds as nanoemulsions. The objective of the present study was to develop oil-in-water nanoemulsions containing “dedo-de-moça” pepper extract for food applications. Research in the development of these nanoemulsions was carried out using a high-speed homogenizer, followed by a high-pressure homogenizer. The influence of the following parameters was assessed: type and concentration of surfactants, hidrophilic-lipophilic balance, lipid/aqueous phase ratio, surfactant/oil ratio, pepper extract composition in nanoemulsion, and processing conditions. Nanoemulsions were evaluated by environmental (centrifugal and thermal) and storage stabilities, characterized by average droplet size and ζ-potential measurements, color, interfacial tension, atomic force, and cryo-scanning electron microscopy. Those with average droplet size between 132 ± 2.0 and 145 ± 1.0 nm were developed depending on working pressure and number of cycles; ζ-potential was around ? 36.71 ± 0.62 mV and the best nanoemulsion was stable to centrifugation and most of the thermal stresses. Droplets were characterized with cryo-scanning electron microscopy as being spherical, homogeneous, and stable, and remained stable when stored at 4 °C and room temperature for over 120 days. The pepper nanoemulsion, developed in the present study, has potential applications in the food industry.     

Comparison of vacuum impregnation and soaking techniques for addition of the probiotic Lactobacillus acidophilus to minimally processed melon

This study aimed to evaluate the vacuum impregnation (VI) and soaking methods in the addition of Lactobacillus acidophilusLA‐3 to minimally processed melon (MPM). The melons were washed, sanitised in chlorine solution (200 mg L^?1), peeled and cutted into cubes. Lactobacillus acidophilusLA‐3 (1.4 × 10¹⁰ CFU g^?1) were added to the MPM through both techniques. The L. acidophilusLA‐3 count in MPM was similar to those commonly found in dairy products having probiotic claim, but VI was more efficient than soaking in maintaining the viability (8.61 and 7.98 Log CFU g^?1, respectively). The pH, acidity and soluble solids were not affected by probiotic culture and the incorporation technique; however, the VI affected the firmness of fruit. The MPM was within Brazilian standards for their microbiological characteristics. MPM may be used as a carrier of probiotic bacteria, being one more alternative for individuals who consume probiotic products.     

Inhibitory effect of cinnamon, clove, lemongrass, oregano and palmarose essential oils on growth and fumonisin B1 production by Fusarium proliferatum in maize grain

The effect of cinnamon, clove, oregano, palmarose and lemongrass oils on growth and FB1 production by three different isolates of F. proliferatum in irradiated maize grain at 0.995 and 0.950 aw and at 20 and 30 degrees C was evaluated. The five essential oils inhibited growth of F. proliferatum isolates at 0.995 aw at both temperatures, while at 0.950 aw only cinnamon, clove and oregano oils were effective in inhibiting growth of F. proliferatum at 20 degrees C and none of them at 30 degrees C. Cinnamon, oregano and palmarose oils had significant inhibitory effect on FB1 production by the three strains of F. proliferatum at 0.995 aw and both temperatures, while clove and lemongrass oils had only significant inhibitory effect at 30 degrees C. No differences were found using 500 or 1000 microg essential oil g(-1). At 0.950 aw, none of the essential oils had any significant effect on FB1 production. The results suggest that mainly cinnamon and oregano oils could be effective in controlling growth and FB1 production by F. proliferatum in maize under preharvest conditions.