SDN‐DMM for intelligent mobility management in heterogeneous mobile IP networks

Mobility management applied to the traditional architecture of the Internet has become a great challenge because of the exponential growth in the number of devices that can connect to the network. This article proposes a Software‐Defined Networking (SDN)‐based architecture, called SDN‐DMM (SDN‐Distributed Mobility Management), that deals with the distributed mode of mobility management in heterogeneous access networks in a simplified and efficient way, ensuring mainly the continuity of IP sessions. Intent‐based mobility management with an IP mapping schema for mobile node identification offers optimized routing without tunneling techniques, hence, an efficient use of the network infrastructure. The simplified mobility control API reduces both signaling and handover latency costs and provides a better scalability and performance in comparison with traditional and SDN‐based DMM approaches. An analytical evaluation of such costs demonstrated the better performance of SDN‐DMM, and a proof of concept of the proposal was implemented in a real environment.     

An improved HF field strength prediction method

A multi-correlation process for reducing the RMS error between the field strength values predicted by the use of the method laid down in Report 894.2 (1991) and the values of Databank.D1 is described. Three functions are used. The first function has 1080 coefficients describing 10 distance ranges, 4 solar activity ranges, and 27 frequency to MUF ratio ranges. The second function covers 10 distance ranges and 24 local time data in the mid path with a total of 240 coefficients. The third function has 720 coefficients covering 10 distance ranges, 6 modified dip angle values, and 12 months. With the use of these functions, the final RMS error is 7.69 dB for the whole set of circuits of Databank.D1 database and 7.29 dB for short paths. The Report 894.2 method has a RMS error of 10.1 dB. Four plots are included to compare that method with the improved method     

A variable rate multipulse speech coder for CDMA cellular systems

Variable Rate (VR) speech coders are classified into: source-controlled VR coders where the rate is selected depending on the local character of the speech, and network-controlled VR coders where an external control signal selects the coding rate. The first category benefits from the variable rate channels used by Code Division Multiple Access (CDMA) mobile communications. The second category is indispensable for the right behaviour of the CDMA systems under conditions as high traffic levels. The VR speech coder presented in this communication exhibits both types of control. The source control is achieved by means of a Voice Activity Detector (VAD) and a phonetic classifier. The network control acts on the selection procedure of the multipulse excitation sequence to the synthesis filter. This is the main advantage of our VR MultiPulse speech coder because by means of an external signal the bit rate can be changed only every 4 msec, without transitions or distortions. Considering one-way communication, six different operating rates can be externally selected ranging from 4.8 to 9.1 kbps for the active frames; an average bit rate of 380 bps is required for the noise frames.This work has been partly funded by the Spanish Research National Plan under grant no. TIC92-0800-C05-02 and by Northern Telecom.     

Reduced Surfactant Uptake in Three Dimensional Assemblies of VOx Nanotubes Improves Reversible Li+ Intercalation and Charge Capacity

The relationship between the nanoscale structure of vanadium pentoxide nanotubes and their ability to accommodate Li⁺ during intercalation/deintercalation is explored. The nanotubes are synthesized using two different precursors through a surfactant‐assisted templating method, resulting in standalone VO _x (vanadium oxide) nanotubes and also “nano‐urchin”. Under highly reducing conditions, where the interlaminar uptake of primary alkylamines is maximized, standalone nanotubes exhibit near‐perfect scrolled layers and long‐range structural order even at the molecular level. Under less reducing conditions, the degree of amine uptake is reduced due to a lower density of V⁴⁺ sites and less V₂O₅ is functionalized with adsorbed alkylammonium cations. This is typical of the nano‐urchin structure. High‐resolution TEM studies revealed the unique observation of nanometer‐scale nanocrystals of pristine unreacted V₂O₅ throughout the length of the nanotubes in the nano‐urchin. Electrochemical intercalation studies revealed that the very well ordered xerogel‐based nanotubes exhibit similar specific capacities (235 mA h g^?1) to Na⁺‐exchange nanorolls of VO_x (200 mA h g^?1). By comparison, the theoretical maximum value is reported to be 240 mA h g^?1. The VOTPP‐based nanotubes of the nano‐urchin 3D assemblies, however, exhibit useful charge capacities exceeding 437 mA h g^?1, which is a considerable advance for VO_x based nanomaterials and one of the highest known capacities for Li⁺ intercalated laminar vanadates.     

New Drug‐Structure‐Directing Agent Concept: Inherent Pharmacological Activity Combined with Templating Solid and Hollow‐Shell Mesostructured Silica Nanoparticles

One of the major challenges in medicine is the delivery and control of drug release over time. Current approaches take advantage of mesostructured silica nanoparticles (MSNs) as carriers but suffer several problems including complex synthesis that requires sequential steps for (1) removal of surfactants and (2) functionalization of MSNs to allow upload of the drugs. Here, a novel solution is presented to these restrictions: the design of drug‐structure‐directing agents (DSDAs) with dual inherent pharmacological activity and ability to direct the formation of solid and hollow‐shell MSNs. Pharmacologically active DSDAs obtained by amidation of drugs with fatty acids are allowed to form micelles, around which the inorganic species self‐assembled to form MSNs. Since the DSDAs direct the formation of MSNs, the steps to remove surfactants, functionalization, and drug upload are not required. The MSNs thus prepared provide sustained release of the drug over more than six months, as well as rapid cellular internalization by both physiological and tumoral human colon cells without affecting cell viability. Moreover, the gradual intracellular release of both, the active drug and lipid moiety with potential nutraceutical properties is proved. MSN particles designed with this approach are promising vehicles for controlled and sustained intra‐or extracellular drug‐delivery.     

Comparison of calibration curve fitting methods in the determination of H2S mass fractions in natural gas by GC-SCD

This paper discusses metrologically the best practice regarding the calibration curves applied to H₂S mass fractions determination in natural gas by gas chromatography with sulfur chemiluminescence detection (GC-SCD). Three calibration curves were constructed by performing GC-SCD analysis of different H₂S gas standard concentrations (from 3 mg kg^?1 up to 500 mg kg^?1). These experimental curves are better fitted by an unweighted quadratic calibration curve considering ANOVA approach compared to ASTM D5504-12. Despite this, the obtained results show that these two different calibration curve approaches (ASTM and ANOVA) lead to comparable results. Hence, there are no significant statistical differences between these two approaches based on the hypothesis test applied. However, the quadratic calibration curve presents measurement uncertainties of H₂S mass fractions much lower than the ASTM approach.     

Effect of salt on oxidative changes in pre- and post-rigor ground beef

Pre- and post-rigor beef was ground and salt was added to give 0·0, 0·5, 2·0 and 4·0% NaCl (w/w). Samples were removed after 0, 24, 48, 72 and 96 h at 4°C and analyzed for pH, TBA numbers and percentages of reduced myoglobin (Mb), metmyoglobin (MMb) and oxymyoglobin (MbO(2)). After holding for 96 h the samples were cooked in a boiling water bath to an internal temperature of 80°C and held at 4°C for 48 h before TBA analysis. Pre-rigor grinding and salting reduced the post-mortem pH decline and the extent of meat discoloration as shown by the differences in the amount of MMb. The extent of lipid oxidation as measured by TBA numbers was not significantly different for the pre- and post-rigor ground salted meat samples, although salt accelerated oxidation during storage. Results demonstrated that pre-rigor grinding and salting of beef produces a more stable bright red color, which appears to be associated with a lower percentage of MMb and a higher ultimate pH in the pre-rigor salted meat.     

Solvent fractionation of petroleum pitch for mesophase formation

Petroleum pitch (Ashland A240) has been subjected to thermal treatment and solvent fractionation to produce refined pitches to be evaluated as impregnants for C-C composites. The solvent fractions were obtained by sequential Soxhlet extraction with solvents such as hexane, benzene, and pyridine. Thermal treatment to 408 °C produced a mesophase pitch (≈50% mesophase); an appreciable portion of the mesophase was soluble in strong solvents. There were substantial differences in chemical composition and in pyrolysis behaviour of the fractions. As the depth of fraction increased, the pyrolysis yield and bloating increased, and the microstructure of the coke became finer until glassy microconstituents were formed in the deepest fractions.     

Effect of solidification microstructure on corrosion behavior of the chill zone in aluminum binary alloys

The corrosion behavior in NaCl solutions of as-cast Al-Cu, Al-Mg and Al-Zn alloys has been studied in relation to the substructures obtained during the solidification process on the surface of the chill zone. Metallographic, microprobe and X-ray techniques have been used to identify the equilibrium precipitates and to estimate the solute distribution in the alloys. The attack produced on predendritic, dendritic and interdendritic zones has been studied by optical microscopy and by scanning electron microscopy. By using potentiostatic techniques, it has been found that localized corrosion occurred above certain potentials corresponding to the pitting potentials of the phases present in the alloys.     

Developmental specificity and evolution of the acid phosphatase isozymes of Triticum aestivum and its progenitor species

The tissue and developmental specificities of the acid phosphatase (ACPH) isozymes of Triticum aestivum and its progenitor species T. turgidum and T. tauschii have been determined and compared using the zymogram technique. Tissue and/or developmental variation in relative staining intensity, suggestive of variation in the quantity of active enzyme present, was observed for each of the seven major isozymes expressed. Isozymes homologous to each of the major isozymes of the hexaploid were detected in one or the other of the progenitor species. No difference in the pattern of developmental or tissue specificity was observed between the species for any isozyme. However, ACPH-4, encoded by ACph4, a structural gene linked to chromosome 4A, differs in electrophoretic mobility between T. aestivum and T. turgidum, indicating that divergence has occurred between these species at the Acph4 locus since the origin of the hexaploid. The molecular weight of each of five ACPH isozymes of the hexaploid was determined to be approximately 58,000. This finding, plus the results of the developmental study and the earlier demonstration that the structural genes for six isozymes (includinomosomes, provides evidence in support of the suggestion that the ACPH structural genes of hexaploid wheat are homoeologous related.