Optimization of inverted bulk heterojunction polymer solar cells

We have successively fabricated inverted bulk heterojunction polymer solar cells employing ZnO and MoO₃ as electron and hole selective layers, respectively. The device structure is ITO/ZnO/P3HT: PCBM/MoO₃/Al. Differently from conventional polymer solar cells, ITO and Al work as electron and hole collecting electrodes in this inverted structure, respectively. We have found the optimal thickness of ZnO and MoO₃ to be 100 nm and 5 nm, respectively. The highest PCE was obtained to be 3.32% under AM 1.5 illumination at 1,000W/m², which is the highest PCE of inverted solar cells reported previously in the literature.     

The optimal composition of the filter-media for coping with daily flow-rate fluctuation

The fluctuation of inlet flow in a water treatment plant can change the filtration rate abruptly and ultimately reduce the filtration performance by leaking the detained particles in filter media. The surface wave, occurring in the intake well by the fluctuation of inlet flow, reaches the filtration process in a very short time (about 10 minutes), which makes it impossible to control the filtration rate stably. In this study the authors evaluated the effect of daily flow-rate fluctuation on the performance of sand filtration process, and the dual media composition was proposed to improve the filtration performance. Comparative column tests were carried out for the various dual media, such as sand and anthracite compositions. From the results of column tests, dual media with the composition of sand 45 cm and anthracite 30 cm is more effective than the single media with sand in filtration process. In addition, irrespective of dual media composition, the managing ability to cope with that fluctuation tends to be weak at the end of allowable filtration duration time.     

Effect of synthesis condition and annealing on the sensitivity and stability of gas sensors made of Zn-doped <Emphasis Type=Italic>γ</Emphasis>-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> particles

Gas sensors made of flame-synthesized Zn-doped γ-Fe₂O₃ nanoparticles were found to have high sensitivity and high aging resistance. Zinc-doped γ-Fe₂O₃ nanoparticles and microparticles were synthesized by flame spray pyrolysis (FSP). Gas sensors were fabricated with as-synthesized particles, and with particles that had been annealed. The sensors’ response to acetone vapor and H₂ was measured as fabricated, and measured again after the sensors were aged for three days. The sensors made from as-synthesized particles showed a gas sensing sensitivity 20 times higher than the literature value. However, sensors made of microparticles lost their sensing ability after three days of aging; sensors made of nanoparticles retained their gas sensing capability after aging. Sensors made of annealed particles did not have significant gas sensing capabilities. Analysis using the William and Hall method showed that the microstrains decreased significantly in both H₂/O₂ and H₂/Air flame synthesized particles after annealing. The results showed that sensors made of flame-synthesized particles have much higher sensitivity than sensors made of particles previously reported. Especially, sensors made of flame-synthesized nanoparticles are resistant towards aging. This aging resistance may be attributed to the particles’ ability to retain their microstrains.     

Receptor-Based Fluorescence Polarization Assay to Detect Phthalate Esters in Chinese Spirits

This work developed a fluorescence polarization (FP) assay for detection of phthalate esters (PAEs) in Chinese spirits. A mouse-derived recombinant peroxisome proliferator-activated receptor α ligand binding domain (mPPARα-LBD*) and a fluorescent-labeled fatty acid (C4-BODIPY-C9) were employed as recognition element and fluorescent tracer, respectively, providing the limits of detection (LODs) below 11.2 μM for the 10 PAEs tested in buffer. Chinese spirits spiked with DEHP and DBP could be positively detected in combination with simple pretreatment, with recoveries ranging from 76.9 to 87.0 % and with coefficients of variation below 10 %. Additionally, the mechanisms of mPPARα-LBD* binding to PAEs were investigated by using molecular simulation approach. The results suggested that the proposed method was reliable for monitoring PAEs in Chinese spirits.     

Minimization of free radical damage by metal catalysis of multivitamin/multimineral supplements

Multivitamin/multimineral complexes are the most common dietary supplements. Unlike minerals in foods that are incorporated in bioorganic structures, minerals in dietary supplements are typically in an inorganic form. These minerals can catalyze the generation of free radicals, thereby oxidizing antioxidants during digestion. Here we examine the ability of a matrix consisting of an amino acid and non-digestible oligosaccharide (AAOS) to blunt metal-catalyzed oxidations. Monitoring of ascorbate radical generated by copper shows that ascorbate is oxidized more slowly with the AAOS matrix than with copper sulfate. Measurement of the rate of oxidation of ascorbic acid and Trolox^® by catalytic metals confirmed the ability of AAOS to slow these oxidations. Similar results were observed with iron-catalyzed formation of hydroxyl radicals. When compared to traditional forms of minerals used in supplements, we conclude that the oxidative loss of antioxidants in solution at physiological pH is much slower when AAOS is present.     

Morphology and corrosion resistance of Cr(III)-based conversion treatments for electrogalvanized steel

The effectiveness of Cr(VI)-based passivation treatments is well accepted but there are many problems with regard to their environmental suitability. Because these compounds are carcinogenic and toxic, eco-friendly systems capable of replacing them are being evaluated. In this work, the corrosion behavior in 0.5 M NaCl solution of zinc coatings deposited from a free-cyanide alkaline bath and treated with Cr³⁺ based passivation coatings were characterized through DC and EIS techniques. The salt spray test as well as studies of the surface structure and chemical composition were also performed. From these analyses it was inferred that (1) the green-colored Cr³⁺ passivated coatings provide better corrosion resistance than the yellow- and blue-colored coatings, and (2) together with an adequate painting system, they could be a less polluting and less toxic alternative to traditional chromate coatings.