Computer simulation and comparative study on the pervaporation separation characteristics of sodium alginate and its blend membranes with poly(vinyl alcohol) to separate aqueous mixtures of 1,4‐dioxane or tetrahydrofuran

A comparative study on the pervaporation separation has been attempted for water + 1,4‐dioxane and water + tetrahydrofuran mixtures using sodium alginate and blend membranes of sodium alginate with 5, 10, and 20 mass % of poly(vinyl alcohol). Pure sodium alginate membrane has a selectivity of 111 to water at 0.35‐mol fraction of water in the feed mixture containing 1,4‐dioxane while for water + tetrahydrofuran mixture, the membrane selectivity to water was 291 at 0.31‐mol fraction of water in the feed mixture. Pervaporation results have been discussed using the solution–diffusion principles. Arrhenius activation parameters for diffusion and permeation have been computed from the temperature‐dependent pervaporation results. Furthermore, experimental results have been analyzed using the complete mixing and plug flow models to compute membrane area as well as design parameters that are useful in scale‐up operations. The plug flow model is more appropriate than the complete mixing model to analyze the pervaporation results. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1827–1840, 2004     

An Efficient Parallel Algorithm for the Layered Planar Monotone Circuit Value Problem

A planar monotone circuit (PMC) is a Boolean circuit that can be embedded in the plane and that contains only AND and OR gates. A layered PMC is a PMC in which all input nodes are in the external face, and the gates can be assigned to layers in such a way that every wire goes between gates in successive layers. Goldschlager, Cook and Dymond, and others have developed NC ² algorithms to evaluate a layered PMC when the output node is in the same face as the input nodes. These algorithms require a large number of processors (Ω(n ⁶ ), where n is the size of the input circuit). In this paper we give an efficient parallel algorithm that evaluates a layered PMC of size n in time using only a linear number of processors on an EREW PRAM. Our parallel algorithm is the best possible to within a polylog factor, and is a substantial improvement over the earlier algorithms for the problem. Received April 18, 1994; revised April 7, 1995.     

ANN-based QRS-complex analysis of ECG

The authors describe the development of critical pathways for ambulatory obstetric case management. When case management was identified as needed, but published work in outpatient obstetrics could not be found, four nurses used this opportunity to design a cost-effective system leading to quality outcomes. The driving force was the need for a format that directed comprehensive consistent care delivered by a large multidisciplinary health care team. Design issues included capturing leading edge standards of care and user friendly formats for all caregivers. Throughout a period of 2 years, a trifold format was developed for all obstetric patients, and 15 bifold formats were developed for patients with specific high-risk diagnoses. The format design facilitated cost-effective quality care and is expected to improve patient outcomes. A research study has been initiated to measure effectiveness of the design.     

Genetic analysis of adult-onset cataract in a city-based ophthalmic hospital

When oxygen delivery (DO2) critically decreases, oxygen consumption (VO2) becomes supply dependent. We examined whether end-tidal PCO2 (PetCO2) would identify supply dependency during shock. Five dogs (Group I) underwent progressive hemorrhage to decrease DO2 until they could no longer maintain a stable blood pressure. Five additional animals (Group II) were bled until VO2 decreased to 70% of baseline, followed by resuscitation. The PetCO2 versus time inflection point was compared with the DO2 at onset of supply dependency (DO2crit). DO2crit for Groups I and II were 6.9 +/- .4 and 8.1 +/- 1.3, respectively (p = NS), and not statistically different from the DO2 values at which PetCO2 decreased (6.6 +/- .7 and 6.3 +/- .7 mL/kg per min, respectively). AT constant minute volume, PetCO2 effectively indicated the onset of supply dependency and rapidly increased during resuscitation, paralleling the changes in VO2 in this model of hemorrhagic shock.     

Illumination-tolerant face verification of low-bit-rate JPEG2000 wavelet images with advanced correlation filters for handheld devices

Face recognition on mobile devices, such as personal digital assistants and cell phones, is a big challenge owing to the limited computational resources available to run verifications on the devices themselves. One approach is to transmit the captured face images by use of the cell-phone connection and to run the verification on a remote station. However, owing to limitations in communication bandwidth, it may be necessary to transmit a compressed version of the image. We propose using the image compression standard JPEG2000, which is a wavelet-based compression engine used to compress the face images to low bit rates suitable for transmission over low-bandwidth communication channels. At the receiver end, the face images are reconstructed with a JPEG2000 decoder and are fed into the verification engine. We explore how advanced correlation filters, such as the minimum average correlation energy filter [Appl. Opt. 26, 3633 (1987)] and its variants, perform by using face images captured under different illumination conditions and encoded with different bit rates under the JPEG2000 wavelet-encoding standard. We evaluate the performance of these filters by using illumination variations from the Carnegie Mellon University's Pose, Illumination, and Expression (PIE) face database. We also demonstrate the tolerance of these filters to noisy versions of images with illumination variations.     

Application of carbon nanomaterial as a microwave absorber

Microwave absorption (8 GHz to 12 GHz) studies have been made with carbon nanomaterials for the first time. Carbon nanomaterials are synthesized by the pyrolysis of camphor. It is observed that film of carbon prepared under certain synthetic condition, can absorb microwave of either some specific wavelengths e.g., 9.5 GHz and 11.5 GHz or full range from 8-12 GHz to the extent of 20 dB depending upon their preparation condition. Carbon nanobeads seems to absorb the microwave in the range of 8-12 GHz.     

Optimal VLSI graph embeddings in variable aspect ratio rectangles

We generalize earlier results in VLSI layout theory by considering variable aspect ratio embeddings for VLSI graphs. By aspect ratio we mean the ratio of the length of the longer side to the length of the shorter side of the bounding rectangle of the embedding. Our results are based on separators and bifurcators. We obtain embeddings with existentially optimal area and any desired aspect ratio. Additionally, we can obtain either bounded capacitive delay or existentially optimal minimax edge length in the embeddings; both of these features reduce delays in the circuit. A special feature of our results on minimax edge length is that they unify earlier separator- and bifurcator-based results for square embeddings, and also provide a simplified lower bound proof.     

Shared partial path protection in WDM networks with shared risk link groups

For 100% shared risk link group (SRLG) failure protection, conventional full path protection has to satisfy SRLG-disjoint constraints, i.e., its working path and backup path cannot go though the same SRLG. With the increase of size and number of SRLGs, capacity efficiency of conventional shared full path protection becomes poorer due to SRLG-disjoint constraints and the blocking probability becomes much higher due to severe traps. To solve these problems, we present a partial path protection scheme where SRLG-disjoint backup paths may only cover part of the working path. Full path protection becomes a special case of partial path protection, in which the backup path covers the full working path. By choosing the most survivable partial backup path as backup path, we can make the impact of SRLG failures as low as possible and accept as many as possible connection requests. Assuming every SRLG has the same probability to fail, we present a heuristic algorithm to find the most survivable partial backup path by choosing full path protection first, iteratively computing partial backup paths and choosing the most survivable one. The benefit of this heuristic algorithm is that it can find the optimal results within less iteration. Analytical and simulation results show that, compared to conventional full path protection, our proposed scheme can significantly reduce blocking probability with little sacrifice on survivability. The proposed scheme is very useful particularly when the network contains a lot of SRLGs and the blocking probability of conventional full path protection becomes too high.

Effect of pre-harvest and post-harvest conditions on the fruit allergenicity: A review

Fruits are an important source of vitamins and antioxidants that can effectively delay aging and contribute to health and well-being of the human kind. However, they are growing to be one of the primary elicitors of food allergies around the world. Fruit allergens can induce an IgE-mediated (Immunoglobulin E) reaction, presenting with a symptom like localized oral allergy syndrome (OAS). Numerous studies showed that varying environmental and cultivation conditions can influence the fruit allergen content during flowering and ripening stages. Further, the variety, harvesting maturity, and storage conditions can also significantly influence the allergenicity potential. For example, unripe apples and tomatoes have lower levels of allergens compared to ripened fruits. Researchers have also reported that modified atmosphere packaging (MAP) can help reduce Mal d 3 content present in apples during storage. Post-harvest processing like peeling is also considered a good method to help reduce the overall allergenicity in few fruits whose peel might contain majority of the allergens. This review will discuss the overall influence of both pre-harvest and post-harvest factors on the fruit allergens. We will also discuss the progress regarding the cause, symptoms and diagnostic methods of fruit based allergies.