Hybrid Resource Allocation Scheme in Multi-hop Device-to-Device Communication for 5G Networks

Wireless Personal Communications - The 5G communication paradigm provides architecture of coexistence of device-to-device (D2D) communication with the current cellular communication. Direct D2D...     

Reversible end-to-end assembly of gold nanorods using a disulfide-modified polypeptide

Directing the self-assembly of colloidal particles into nanostructures is of great interest in nanotechnology. Here, reversible end-to-end assembly of gold nanorods (GNR) is induced by pH-dependent changes in the secondary conformation of a disulfide-modified poly(L-glutamic acid) (SSPLGA). The disulfide anchoring group drives chemisorption of the polyacid onto the end of the gold nanorods in an ethanolic solution. A layer of poly(vinyl pyrrolidone) is adsorbed on the positively charged, surfactant-stabilized GNR to screen the surfactant bilayer charge and provide stability for dispersion of the GNR in ethanol. For comparison, irreversible end-to-end assembly using a bidentate ligand, namely 1,6-hexanedithiol, is also performed. Characterization of the modified GNR and its end-to-end linking behavior using SSPLGA and hexanedithiol is performed using dynamic light scattering (DLS), UV-vis absorption spectroscopy and transmission electron microscopy (TEM). Experimental results show that, in a colloidal solution of GNR-SSPLGA at a pH～3.5, where the PLGA is in an α-helical conformation, the modified GNR self-assemble into one-dimensional nanostructures. The linking behavior can be reversed by increasing the pH (>8.5) to drive the conformation of the polypeptide to a random coil and this reversal with pH occurs rapidly within minutes. Cycling the pH multiple times between low and high pH values can be used to drive the formation of the nanostructures of the GNR and disperse them in solution.     

Potential of Sr4Al14O25: Eu2+,Dy3+ inorganic oxide-based nanophosphor in Latent fingermark detection

In this paper, the potential of the Sr₄Al₁₄O₂₅: Eu²⁺,Dy³⁺ fluorescent nanophosphor is explored to visualize the latent fingermarks. The nanophosphor has been synthesized using self-propagating high temperature synthesis and shows intense luminescence and strong long after glow properties. These nano particles have been characterized for their particle size, crystalline phase, and photoluminescent properties. The calculated PL CIE co-ordinates (0.138, 0.359) correspond to the blue–green shade. Different porous, non-porous, as well as slightly non-smooth surfaces are taken and successfully tested for latent fingerprints development with the prepared Sr₄Al₁₄O₂₅: Eu²⁺,Dy³⁺ fluorescent nanophosphor powder. Present nano powder is advantageous to use on luminescent or multicolored surfaces as it gives greater contrast and also eliminates the problem of background interferences with the friction ridges due to its strong long after glow property. The results are very good when latent fingerprints were developed on the currency notes with optical variable ink and highly fluorescent pattern areas.     

Effects of Platinum on the Hot Corrosion Behavior of Hf-Modified �á�-Ni3Al?+?��-Ni-Based Alloys

The establishment of a protective ??-Al₂O₃ scale is critical for providing high temperature protection from oxidation and hot corrosion, thereby improving lifetimes of advanced gas turbine engine components. Recent work by our group has shown that a wide range of Pt + Hf-modified ?á?-Ni₃Al + ??-Ni alloy compositions form a very adherent and slow-growing Al₂O₃ scale and exhibit excellent oxidation resistance. The main thrust of the present study was to understand the effects of Pt addition on the Type I (900 °C) and Type II (705 °C) hot corrosion (HC) behavior of model Hf-modified ?á? + ?? alloy compositions. The salt used to bring about hot corrosion was Na₂SO₄. It was found that the Type I HC resistance of ?á? + ?? alloys improved with up to about 10 at.% Pt addition, but then decreased significantly with increasing Pt content up to 30 at.% (the maximum level studied); however, under Type II HC conditions the resistance of ?á? + ?? alloys progressively improved with increasing Pt content up to 30 at.%. The effect of pre-oxidation on hot corrosion resistance was also examined, and the results indicated that pre-oxidation generally improved Type II HC resistance for the test duration studied.     

TAP study of NOx storage and reduction on Pt/Al2O3 and Pt/Ba/Al2O3

A systematic mechanistic study of NO storage and reduction over Pt/Al₂O₃ and Pt/BaO/Al₂O₃ is carried out using Temporal Analysis of Products (TAP). NO pulse and NO/H₂ pump-probe experiments at 350 °C on pre-reduced, pre-oxidized, and pre-nitrated catalysts reveal the complex interplay between storage and reduction chemistries and the importance of the Pt/Ba coupling. NO pulsing experiments on both catalysts show that NO decomposes to major product N₂ on clean Pt but the rate declines as oxygen accumulates on the Pt. The storage of NO over Pt/BaO/Al₂O₃ is an order of magnitude higher than on Pt/Al₂O₃ showing participation of Ba in the storage even in the absence of gas phase O₂. Either oxygen spillover or transient NO oxidation to NO₂ is postulated as the first steps for NO storage on Pt/BaO/Al₂O₃. The storage on Pt/Ba/Al₂O₃ commences as soon as Pt–O species are formed. Post-storage H₂ reduction provides evidence that a fraction of NO is not stored in close proximity to Pt and is more difficult to reduce. A closely coupled Pt/Ba interfacial process is corroborated by NO/H₂ pump-probe experiments. NO conversion to N₂ by decomposition is sustained on clean Pt using excess H₂ pump-probe feeds. With excess NO pump-probe feeds NO is converted to N₂ and N₂O via the sequence of barium nitrate and NO decomposition. Pump-probe experiments with pre-oxidized or pre-nitrated catalyst show that N₂ production occurs by the decomposition of NO supplied in a NO pulse or from the decomposition of NOx stored on the Ba. The transient evolution of the two pathways depends on the extent of pre-nitration and the NO/H₂ feed ratio.     

Synthesis of biodiesel fuel from safflower oil using various reaction parameters

Biodiesel fuel is gaining more and more importance because of the depletion and uncontrollable prices of fossil fuel resources. The use of vegetable oil and their derivatives as alternatives for diesel fuel is the best answer and as old as Diesel Engine. Chemically biodiesel fuel is the mono alkyl esters of fatty acids derived from renewable feed stocks like vegetable oils and animal fats. Safflower oil contains 75-80% of linoleic acid; the presence of this unsaturated fatty acid is useful in alleviating low temperature properties like pour point, cloud point and cold filter plugging point. In this paper we studied the effect of various parameters such as temperature, molar ratio (oil to alcohol), and concentration of catalyst on synthesis of biodiesel fuel from safflower oil. The better suitable conditions of 1:6 molar ratio (oil to alcohol), 60 degrees C temperature and catalyst concentration of 2% (by wt. of oil) were determined. The finally obtained biodiesel fuel was analyzed for fatty acid composition by GLC and some other properties such as flash point, specific gravity and acid value were also determined. From the results it was clear that the produced biodiesel fuel was with in the recommended standards of biodiesel fuel with 96.8% yield.     

Attainable regions of reactive distillation—Part III. Complex reaction scheme: Van de Vusse reaction

The main underlying principle behind the application of reactive distillation (RD) for selectivity enhancement is to facilitate the separation of selected components and favorably manipulate the composition profiles in the reactive zone to expedite the desired reaction. In this paper, a geometric approach of attainable region (AR), which is already developed for conventional reactor network, is extended further to include few representative RD configurations. We define new RD building blocks and the corresponding composition vectors that indicate a need of networking of RD units among themselves and with conventional reactors to enlarge the set of attainable compositions. A model reaction scheme of van de Vusse type ) is studied as an illustrative example and an algorithm is developed to obtain the attainable region for the given kinetics, feed composition and relative volatilities. In almost all the different cases, which are studied by varying the kinetics and volatility pattern, network consisting of RD units performs better than the conventional reactor network.