Palm oil‐based organogels and microemulsions for delivery of antimicrobial drugs

This study has been designed to develop palm oil (PO) based organogels using span 80/tween 80 mixture (OG) as a gelator system by fluid‐filled structure mechanism. The results suggested formation of organogels, emulsions, and microemulsions as the proportions of PO, OG and water were varied. The emulsions were found to be thermodynamically unstable as compared to the organogels and the microemulsions. Accelerated thermal stability test suggested that all the microemulsions and the organogels of only eight compositions were stable. The organogels showed viscoelastic property while the microemulsions showed viscous flow behavior. Both the organogels and the microemulsions were found to be highly hemocompatible and nonirritant. The antimicrobial efficiency of the ciprofloxacin HCl‐loaded formulations showed equivalent efficiency as compared to marketed formulations. The rates of drug release from the organogels were found to be relatively slower as compared to the microemulsions. The preliminary studies suggested that the developed organogel and microemulsion‐based formulations may be tried for topical delivery of antimicrobials. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 39979.     

Electrical properties and the role of inhomogeneities at the polyvinyl alcohol/n‐inp schottky barrier interface

In this work, we have investigated the electrical properties of Au/n‐InP contacts with a thin layer of polyvinyl alcohol (PVA) as an interlayer. The current–voltage (I–V) and capacitance–voltage (C–V) measurements are carried out in the temperature range of 175–425 K. The Au/PVA/n‐InP Schottky structure show nonideal behaviors and indicates the presence of a nonuniform distribution of interface states. The temperature dependent interface states densities (N_SS), ideality factor and barrier height are obtained. An abnormal decrease in zero‐bias barrier height (BH) and increase in the ideality factor ( ) with decreasing temperature have been explained on the basis of the thermionic emission theory with Gaussian distribution (GD) of the BHs due to the BH inhomogeneities. The experimental I–V characteristics of Au/PVA/n‐InP Schottky diode has revealed the existence of a double GD with mean BH values of ( ) of 1.246 and 0.899 eV and standard deviation ( ) of 0.176 and 0.137 V, respectively. Consequently, the modified conventional activation energy versus plot gives and Richardson constants ( ) and the values are 1.17 and 0.71 eV and 9.9 and 6.9 A/cm² K², respectively, without using the temperature coefficient of the BH. The effective Richardson constant value of 9.9 A/cm² K² is very close to the theoretical value of 9.4 A/cm² K² for n‐InP. The discrepancy between Schottky barrier heights estimated from I–V and C–V measurements is also discussed. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39773.     

Effective solar power harnessing using a few novel solar tree designs and their performance assessment

Solar irradiance being considered as one of the most important alternative sources of energy can be harnessed in the form of electrical power using photovoltaic panels erected under the sun. Optimum conversion of power from solar panels can be obtained by using Maximum Power Point Tracking (MPPT), which involves continuously adjusting the angle of panels according to the change in the angle of falling irradiance. These trackers, however, use some amount of power for operation of MPPT equipment. Various techniques for arranging the solar panels in three dimensions have been suggested for optimizing the output power from them. The inspiration behind arranging the panels are often drawn from the natural trees where the branches and the leaves follow a particular pattern called phyllotaxy which is directly analogous to the Fibonacci number and Golden ratio. In this research work, the power output from two solar tree models based on 3/8 and 2/5 phyllotaxy pattern and solar conventional panel compared under similar irradiance conditions. There are so many phyllotaxy patterns like 1/3, 2/5, 3/8, etc. When the solar panels aligned in different phyllotaxies, then the orientation direction of solar panels are distinct. Each solar panel connected in solar trees is in a different direction, so that they received the maximum amount of sunlight throughout the day as compared to conventional panels which is oriented unidirectional.     

Micellization and Clouding Behavior of EO–PO Block Copolymer in Aqueous Salt Solutions

Aqueous solution properties of polyethylene oxide–block-polypropylene oxide–block-polyethylene oxide TBP [(PEO)₁₀₃(PPO)₃₉(PEO)₁₀₃] were studied in the presence of sodium salts with different anions (NaI, NaBr, NaCl, NaF, Na₂SO₄, Na₃PO₄) to investigate unimer-to-micelle transition [critical micelle concentration (CMC), critical micellization temperature (CMT)], micelle size and the phase separation (cloud point). This TBP, due to its very hydrophilic (80% PEO) nature does not form micelles at ambient temperatures. Micellization can be induced much below its CMT in water on addition of sodium salts having different anions. Analytical methods viz. fluorescence, FTIR and dynamic light scattering (DLS) were used to monitor the salt-induced micellization. The hydration of respective anion and resultant contribution to its salting-out effect was found to be the governing factor in promoting micellization. The presence of salt decreases the CMC, CMT and phase separation temperature. The salts affect the aggregation process in agreement with an order mentioned in Hofmeister series.     

Conceptual Design of Unpressurized Shelters on Lunar Surface

Three concepts for the shelters on the moon are presented here. It is envisaged that the first robots will land on the moon and start preparing sites for advanced bases and also for future human presence. These robots will encounter severe radiation and micrometeor hits when they are exposed to the lunar atmosphere. During the period of intense solar radiation these robots have to be temporarily sheltered, since shielding on the robots may not be adequate to protect the instruments. The construction of these shelters has to be performed with very little equipment support. This paper presents concepts and their feasibility analysis for the fabrication of shelters under such stringent constraints.     

Management of Multipurpose Multireservoir Using Fuzzy Interactive Method

In this paper a fuzzy interactive method is proposed for efficient management of multipurpose multireservoir problems. The proposed method provides an option to decision maker (DM) to work in an interactive manner to achieve the conflicting objectives as close to their desired values as is practically feasible. In each iteration, fuzzy membership functions of various objectives are framed and combined into a single objective using the product operator. The single objective nonlinear optimization model thus framed in each iteration is numerically solved using genetic algorithm. The solution provides the values of the objectives which can be actually achieved keeping in view their aspired values as provided by DM. At the end of each iteration, DM has the option to modify the aspired values of one or more objectives keeping in view the results obtained by the algorithm thus far. The algorithm is stopped when DM feels satisfied with the results. The working of the proposed method has been demonstrated on the mathematical model of a realistic multipurpose multireservoir system taken from literature.     

Realistic mobility simulation of urban mesh networks

It is a truism that today’s simulations of mobile wireless networks are not realistic. In realistic simulations of urban networks, the mobility of vehicles and pedestrians is greatly influenced by the environment (e.g., the location of buildings) as well as by interaction with other nodes. For example, on a congested street or sidewalk, nodes cannot travel at their desired speed. Furthermore, the location of streets, sidewalks, hallways, etc. restricts the position of nodes, and traffic lights impact the flow of nodes. And finally, people do not wander the simulated region at random, rather, their mobility depends on whether the person is at work, at lunch, etc. In this paper, realistic simulation of mobility for urban wireless networks is addressed. In contrast to most other mobility modeling efforts, most of the aspects of the presented mobility model and model parameters are derived from surveys from urban planning and traffic engineering research. The mobility model discussed here is part of the UDel Models, a suite of tools for realistic simulation of urban wireless networks. The UDel Models simulation tools are available online.     

Analysis of a Three-Phase Delta-Connected Inductive Load Controlled by an SCR-Diode Switch

A detailed analysis is presented of a system consisting of a three-phase delta-connected inductive static load controlled by a thyrode (SCR and diode) controller. The current equations are developed for a three-phase delta-connected inductive circuit representing the steady-state model of an induction motor. The simulated and actual current and voltage waveforms of an induction motor controlled by such an SCR-Diode controller are illustrated. The frequency/power spectra of the phase and line current are also presented.     

Product property and production rate control of styrene polymerization

A multivariable multi-rate nonlinear model predictive control (NMPC) strategy is applied to styrene polymerization. The NMPC algorithm incorporates a multi-rate Extended Kalman Filter (EKF) to handle state variable and parameter estimation. A fundamental model is developed for the styrene polymerization CSTR, and control of polymer properties such as number average molecular weight (NAMW) and polydispersity is considered. These properties characterize the final polymer distribution and are strong indicators of the polymer qualities of interest. Production rate control is also demonstrated. Temperature measurements are available frequently while laboratory measurements of concentration and molecular weight distribution are available infrequently with substantial time delays between sampling and analysis. Observability analysis of the augmented system provides guidelines for the design of the augmented disturbance model for use in estimation using the multi-rate EKF. The observability analysis links measurement sets and corresponding observable disturbance models, and shows that measurements of moments of the polymer distribution are essential for good estimation and control. The CSTR is operated at an open-loop unstable steady state. Control simulations are performed under conditions of plant-model structural mismatch and in the presence of parameter uncertainty and disturbances, and the proposed multi-rate NMPC algorithm is shown to provide superior performance compared to linear multi-rate and nonlinear single-rate MPC algorithms. The major contributions of this work are the development of the multi-rate estimator and the measurement design study based on the observability analysis.     

Effect of interlayer interaction in high-T c cuprate superconductors

We have studied the role of interlayer attractive interaction in a high-T _c system having two layers per unit cell. The single band two-layer tight binding model Hamiltonian is considered and the double time Green's function technique is applied within the mean field approximation. The expressions for the hole density, transition temperature, and intra- and interlayer order parameters are obtained which are found to be dependent on the interlayer interaction and other parameters appearing in the Hamiltonian. The numerical analysis shows that the coupling of the charge carriers (holes) between the layers provides better conditions for the stabilization of long-range order and high superconducting transition temperature in layered superconductors. It is also observed that superconductivity is confined to a narrow region of hole concentration and the single particle tunneling suppresses the transition temperature.