Flow Intensity Parameter in Pier Scour Experiments

Technical note discusses a detailed approach to dimensional analysis for the bridge pier scour phenomenon and the introduction of flow intensity. It demonstrates the dependence of critical upstream velocity on the rest of the parameters describing the process and its implications on dimensional analysis. Assuming that the viscous effects are negligible in the local scour phenomenon, it is concluded that the flow intensity of the approaching undisturbed flow is not an adequate parameter to describe the process in usual laboratory conditions. A new proposal is established.     

Virtualized Web server cluster self-configuration to optimize resource and power use

This work proposes a reusable architecture that enables the self-configuration of a supporting infrastructure for Web server clusters using virtual machines. The goal of the architecture is to ensure service quality, evaluating how broadly it complies with the application's operating restrictions and proportionally acting on the configuration of physical servers (hosts) or virtual machines. In addition, through the rational use of resources, the proposal aims at saving energy. A prototype of the architecture was developed and a performance evaluation carried out with two different resource management approaches. This evaluation shows how fully functional and advantageous the proposal is in terms of using resources, avoiding waste, yet maintaining the application's quality of service within acceptable levels. The architecture also shows to be flexible enough to accept, with a reasonable amount of effort, different resource self-configuration policies.     

Unconstrained springback behavior of Al-Mg-Si sheets for different sitting times

In this work, the springback behavior of the commercial 6022 aluminum alloy in temper aging (T4) is investigated taking into account that the sheets, prior to deformation process, are initially pre-strained and then submitted to various sitting times at room temperature. The unconstrained cylindrical bending test based on the NUMISHEET2002 proceedings as presented by Yoon et al. [Yoon JW, Pourboghrat F, Chung K, Yang DY. Springback prediction for sheet metal forming process using a 3D hybrid membrane/shell method. International Journal of Mechanical Sciences 2002;44:2133-53] is selected as validation benchmark. For finite element simulations, the geometry is modeled by solid-shell finite elements using the formulation of Alves de Sousa et al. [Alves de Sousa RJ, Yoon JW, Cardoso RPR, Fontes Valente RA, Grácio JJ. On the use of a reduced enhanced solid-shell (RESS) element for sheet forming simulations. International Journal of Plasticity 2007;23:490-515; Alves de Sousa RJ, Cardoso RPR, Fontes Valente RA, Yoon J-W, Natal Jorge RM, Grácio JJ. A new one-point quadrature enhanced assumed strain (EAS) solid-shell element with multiple integration points along thickness: Part I—Geometrically linear applications. International Journal for Numerical Methods in Engineering 2005;62:952-77; Alves de Sousa RJ, Cardoso RPR, Fontes Valente RA, Yoon JW, Grácio JJ, Natal Jorge RM. A new one-point quadrature enhanced assumed strain (EAS) solid-shell element with multiple integration points along thickness: Part II—Nonlinear applications. International Journal for Numerical Methods in Engineering 2006;67:160-88]. The material behavior is described based on the work of Correia et al. [Correia JPM, Simões F, Gracio JJ, Barlat F, Ahzi S. A simple hardening rule accounting for time-dependent behavior in Al-Mg-Si alloys. Materials Science Engineering A 2007;456:170-9]. The results of conducted experiments and numerical simulations are compared. It can be concluded about the good agreement between experiments and simulations attesting the effectiveness of the material model utilized to describe the time-dependent hardening behavior.     

Fatty acid profiles in meat from Caiman yacare (Caiman crocodilus yacare) raised in the wild or in captivity

Chemical composition and fatty acid profiles were determined in Caiman yacare meat originating from the neck and tail cuts of animals raised in the wild (n = 6) or in captivity (n = 6), slaughtered at a live weight of approximately 6 kg. All experimental methods were approved by the appropriate environmental protection agencies. Most chemical components were affected by the origin-cut interaction, with the tail cut of wild animals having the highest amount of intramuscular fat (19.2% of DM) and the lowest of moisture (71.8%) and protein (77.0% of DM). Yacare meat had low amounts of SFA (35.1%), which were similar (P > 0.05) in the cuts and origins studied. The total amount of PUFA was higher (P < 0.05) in wild (31.0%) than in captive animals (23.6%), and n − 3 fatty acids had means of about 5% and 2% for the same groups, respectively (P < 0.05). In general, the FA profile of intramuscular fat in yacare meat had a desirable PUFA/SFA ratio above 0.4.     

Effect of external loads on damage detection of rubber‐toughened nanocomposites using carbon nanotubes sensory network

Multiwalled carbon nanotubes of 0.2% weight fraction are used as a sensory network for detecting and characterizing the damage of particulate epoxy composites under shear loading conditions. Three different weight fractions of carboxyl‐terminated butadiene acrylonitrile copolymer rubber [10 parts per hundred of epoxy resin (phr), 20 phr, and 30 phr] are used for toughening a thermoset epoxy composite. The electrical response of the specimens is measured, nearest the central shearing plane, using a four‐circumferential ring probe technique in conjunction with a high‐resolution data acquisition system. A collection of the electromechanical response results are reported with respect to the shear strain. The resistance changes observed under shear loading are related to nonlinear deformation mechanisms, void initiation, and growth around rubber particulate. With increasing rubber content, the strength of the material decreases and a greater drop in resistance is recorded as a result of decreased distance between neighboring carbon nanotubes (CNTs) due to declustering and straightening of molecular chains of host matrix. In the end, a comparison for 30 phr composites under shear loading with that of tensile and compression loading conditions is presented. For initial deformation, there is no change in resistance under shear loading condition; however, the significant resistance change can be noticed under both tension and compression. The specimen under shear loading conditions experiences smaller decrease in resistance when compared with both tension and compression. However, the decrease in resistance is higher for compression due to higher decrease in distance between neighboring CNTs. POLYM. COMPOS., 37:360–369, 2016. © 2014 Society of Plastics Engineers     

Water Resources Assessment at Piracicaba,Capivari and Jundiaí River Basins: A Dynamic Systems Approach

The Piracicaba, Capivari, and Jundiaí River Basins (RB-PCJ) are mainly located in the State of São Paulo, Brazil. Using a dynamics systems simulation model (WRM-PCJ) to assess water resources sustainability, five 50-year simulations were run. WRM-PCJ was developed as a tool to aid decision and policy makers on the RB-PCJ Watershed Committee. The model has 254 variables. The model was calibrated and validated using available information from the 80s. Falkenmark Water Stress Index went from 1,403 m³ person^???1 year^???1 in 2004 to 734 m³ P^???1 year^???1 in 2054, and Xu Sustainability Index from 0.44 to 0.20. In 2004, the Keller River Basin Development Phase was Conservation, and by 2054 was Augmentation. The three criteria used to evaluate water resources showed that the watershed is at crucial water resources management turning point. The WRM-PCJ performed well, and it proved to be an excellent tool for decision and policy makers at RB-PCJ.     

Cover Image,Volume 141, Issue 17

The cover image by Lizandra Viana Maurat da Rocha highlights one of our innovative biodegradable films, which incorporated molybdenum trioxide and zinc oxide into the poly(butylene adipate-co-terephthalate) matrix through casting. The photo emphasizes its partial transparency and homogeneity. Some analytical results reported as FTIR, TD-NMR, XRD and TGA validates nanomaterial's exceptional mechanical and chemical properties. Icons below underscore its potential as an eco-friendly food packaging,with bacteriostatic features and no formation of microplastics after disposal. DOI: 10.1002/app.55294

     

Induction Motors Broken Rotor Bars Diagnosis Through the Discrete Wavelet Transform of the Instantaneous Reactive Power Signal under Time-varying Load Conditions

Abstract—In this article, a method based on the application of the discrete wavelet transform to the instantaneous reactive power signal, for diagnosing the occurrence of broken rotor bars in induction motors operating under time-varying load conditions, is presented. This method is based on the decomposition of the instantaneous reactive power signal, from which wavelet approximation and detail coefficients are extracted. The energy evaluation of known bandwidths permits to de?ne a fault severity factor. This method has been tested through the simulation of an induction motor using a mathematical model based on the winding-function approach. These simulation results are complemented by experimental tests conducted on an induction motor with several faulty rotors that can be interchanged and both simulation and experimental results have shown the effectiveness of the proposed method for broken rotor bars diagnosis in induction motors even under time-varying load conditions.     

Molecular absorption spectrophotometric method for the determination of phosphorus in biodiesel

A molecular absorption method is proposed for the determination of phosphorus in biodiesel. The samples are mineralized using an ashing procedure at 550 °C followed by dissolution of the residue. The analytical procedure is based on the formation of a blue molybdenum complex. 1-amino-2-naphthol-4-sulfonic acid is used as reducing agent. The method was applied to biodiesel samples prepared from soy, canola and sunflower oils and from bovine fat. The limit of detection is 0.57 mg P kg⁻¹ and the limit of quantification is 1.7 mg P kg⁻¹. The observed mean relative standard deviation is about 5%. The simplicity of the procedure added to its precision, accuracy and low cost suggest that it is an excellent option for the determination of phosphorus in biodiesel.