MODELING THE ENERGY, ENVIRONMENTAL, AND FISCAL IMPACTS OF AN URBAN WASTE MANAGEMENT SYSTEM

ABSTRACT This paper develops a solid-waste management model that tracts the composition and amount of waste flow in an urban area from Waste generation through to recycling, waste collection, and waste disposal. It also calculates the environmental, economic and fiscal impacts waste management activities. The model is applied to a case study of the compatibility of recycling and a proposed energy-from-waste plant in Toronto, Canada. The results indicate that the two waste management options have a number of interdepedencies, but that not all are conflicting.     

Residue analysis of thyreostats in baby foods via matrix solid phase dispersion and liquid chromatography – dual-polarity electrospray – tandem mass spectrometry

This paper describes a rapid method for confirming residues of thyreostats in meat-based baby foods by using liquid chromatography – dual polarity electrospray – tandem mass spectrometry (LC-ES(±)-MS/MS). Six thioureylenes, belonging to the group of thiouracil and imidazole, were selected for this work: thiouracil (TU), methylthiouracil (MTU), propylthiouracil (PTU), phenylthiouracil (PhTU), mercaptobenzimidazole (MBI) and tapazole (TAP).

The amphoteric nature of these compounds allows their electrospray detection in both positive and negative ionisation. Nevertheless, MS detection is not favoured by their low molecular weights, while their chromatographic retention is also thwarted by their high polarity. A pentafluorophenyl (PFP) core-shell phase column was selected to avoid peak asymmetry or peak splitting, and a dual-polarity ionisation method was optimised to obtain a sensitivity as high as possible. The method was validated according to the Commission Decision 657/2002/EC. A simple and fast procedure based on matrix solid phase dispersion (MSPD) was optimised to extract analytes from baby foods with recoveries exceeding 82%. Limit of decision (CCα) and detection capability (CCβ) were lower than the permissible maximum concentration (10 ng g^?1). The validated method was then applied to assess the potential occurrence of the six selected thyreostats in nine commercial products. All the samples were found free of contamination.     

Rheological,textural and calorimetric modifications of dark chocolate during process

The influence of several process steps on the rheological, textural and calorimetric characteristics of dark chocolate was evaluated. Samples were obtained at each phase of the manufacturing process: mixing, pre-refining, refining, conching and tempering. Rheological fundamental and empirical properties and thermal characteristics were evaluated on samples. Samples showed marked shear thinning behaviour with yield stress strictly related with the different process steps. Fundamental measurements results were well fitted by the power-law model. From the mixing to the refining samples underwent a drastic significantly (p < 0.05) increase of all considered fundamental (yield stress, apparent viscosity, G′, G″ and K index), empirical (firmness, consistency, cohesiveness, viscosity index) and thermal parameters (T onset, T end, ΔH). This could be attributed to the reduction of samples particle size that involve an increase of the contact point between them. Subsequently, the addition of fat and lecithin in conching and tempering phase, covering the sugar and cocoa particles, reduced interactions and caused a significantly (p < 0.05) decrease in all rheological, textural and thermal parameters.     

Electroless plating—A new technique for the preparation of hard tissue specimens for scanning electron microscopy

Specimens with complicated, intricate three-dimensional structures, which are otherwise difficult to coat adequately by conventional means (sputter or evaporative coating) for scanning electron microscopy, can quickly and simply be rendered conductive by electroless plating. The technique can be recommended only when studying specimens at low magnification because fine detail may be lost.     

Influence of different carbon nanostructures on the electrocatalytic activity and stability of Pt supported electrocatalysts

Commercially available graphitized carbon nanofibers and multi-walled carbon nanotubes, two carbon materials with very different structure, have been functionalized in a nitric–sulfuric acid mixture. Further on, the materials have been platinized by a microwave assisted polyol method. The relative degree of graphitization has been estimated by means of Raman spectroscopy and X-ray diffraction while the relative concentration of oxygen containing groups has been estimated by X-ray photoelectron spectroscopy, which resulted in a graphitic character trend: Pt/GNF > Pt/F-GNF ? Pt/MWCNT > Pt/F-MWCNT. Transmission electron microscopy showed that the Pt particle size is around 3 nm for all samples, which was similar to the crystallite size obtained by X-ray diffraction. The activity towards electrochemical reduction of oxygen has been quantified using the thin-film rotating disk electrode, which has shown that all the samples have a better activity than the commercially available electrocatalysts. The trend obtained for the graphitic character maintained for the electrochemical activity, while the reverse trend has been obtained for the accelerated ageing test. Long-term potential cycling has demonstrated that the functionalization improves the stability for multi-walled carbon nanotubes, at the cost of decreased activity.     

Family risk factors, parental depression, and psychopathology in offspring.

Associations between parents' poor marital adjustment, parent–child discord, affectionless control, low family cohesion, and parental divorce and Diagnostic and Statistical Manual of Mental Disorders (DSM-III) diagnoses were explored in a study of 220 offspring of parents with and without major depression. Family risk factors were more prevalent among offspring of depressed parents. Risk factors were associated with major depression and any diagnosis for children of nondepressed parents; they were associated with conduct disorder for both groups. Parental depression was more important than family risk factors in models predicting major depression, anxiety disorders, and any diagnosis. Both parental depression and family risk factors were significant predictors of conduct disorder. Implications for the etiology of psychopathology and for analytic strategies are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

N,N'-Diglycidylimides and their polymers

At first new epoxy derivatives, namely glycidylimide compounds, have been prepared using benzyltrimethylammonium chloride as catalyst and epichlorohydrin in excess. Their chemical and physical properties were studied. Spectral data confirmed these new structures. Afterwards new epoxy resins have been synthesized by the reaction of diimides and their glycidyl derivatives in N,N-dimethylformamide. The physical characteristics of the obtained polymers and also their solubilities are reported. Their IR, ¹H- and ¹³C-NMR spectra allowed to confirm the polymer structure. Thermal analysis of these compounds showed their good thermal properties.     

Synthesis of asymmetric diglycidyl ester compounds. Reaction with aromatic diamines

New diglycidyl esters coming from the corresponding diacids and epichlorohydrin were synthetized using a quaternary ammonium salt as a catalyst. The new asymmetric compounds were characterized by spectroscopic methods and employed as starting monomers in a crosslinking process. The course of the reactions was followed by IR spectroscopy. Some intermediate species were identified in the onset of the reactions by recording ¹³C-NMR spectra until the products became insoluble in the usual deuterated solvents. The thermal behaviour of these cured epoxy resins was also studied.     

Perfusion in microfluidic cross-flow: separation of white blood cells from whole blood and exchange of medium in a continuous flow

We describe a microfluidic technique for separation of particles and cells and a device that employs this technique to separate white blood cells (WBC) from whole human blood. The separation is performed in cross-flow in an array of microchannels with a deep main channel and large number of orthogonal, shallow side channels. As a suspension of particles advances through the main channel, a perfusion flow through the side channels gradually exchanges the medium of the suspension and washes away particles that are sufficiently small to enter the shallow side channels. The microfluidic device is tested with a suspension of polystyrene beads and is shown to efficaciously exchange the carrier medium while retaining all beads. In tests with whole human blood, the device is shown to reduce the content of red blood cells (RBC) by a factor of approximately 4000 with retention of 98% of WBCs. The ratio between WBCs and RBCs reached at an outlet of the device is 2.4 on average. The device is made of a single cast of poly(dimethylsiloxane) sealed with a cover glass and is simple to fabricate. The proposed technique of separation by perfusion in continuous cross-flow could be used to enrich rare populations of cells based on differences in size, shape, and deformability.